1 / 18

ECE 221 Electric Circuit Analysis I Chapter 14 Maximum Power Transmission

Learn how to find the load resistor that minimizes power wastage and maximizes power transmission efficiency in electric circuits using Thevenin Equivalent and first derivative formulae. Includes examples and calculations.

hicksj
Download Presentation

ECE 221 Electric Circuit Analysis I Chapter 14 Maximum Power Transmission

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ECE 221Electric Circuit Analysis IChapter 14Maximum Power Transmission (From [1] chapter 4.12, p. 120-122) Herbert G. Mayer, PSU Status 11/30/2014 For use at Changchun University of Technology CCUT

  2. Syllabus Motivation Thévenin Equivalent First Derivative Formulae Identify Maximum Derivative p’ Maximum Power Sample

  3. Motivation When utility systems transmit electrical energy across power lines, this must be done with utmost efficiency, lest the universe gets heated up  When electric signals of typically low voltage get transmitted, ultimate goal is sending the signal as strongly as possible, even it that means losing a great % of power, i.e. even if inefficiently! Here we discuss efficient power transmission from a source, with unknown dependent and independent sources and resistive networks How do we find the load RL at terminals a and b such that the least % of power is wasted?

  4. Motivation Given such a network, we can always determine the Thévenin equivalent CVS, with VTh and RTh in series to the CVS For ease of computation, we then replace the actual circuit by the Thévenin equivalent network, and compute: The maximum power delivered in the load resistor RL And the efficiency: dissipated over delivered power, in % of the original delivered

  5. Thévenin Equivalent a a RTh iL iL + VTh - RL RL b b Green box: resistive network containing independent and dependent sources Equivalent CVS at terminals a, b with computable VTh and RTh

  6. First Derivative Formulae

  7. Identify Maximum • Given a function y = f(x), with x occurring to the nth power, there will be n-1 maxima • To find the points of maximal values, compute the derivative f’(x) • Set the derivative f’(x) to zero, this is the incline of the tangent • Compute values of x, where in fact f’(x) = 0 • At those values for x, f(x) has highest −or lowest− values • Since the tangent will be horizontal

  8. Identify Maximum

  9. Identify Maximum • Function (a) above is a 3rd power of x, there will be 2 maxima • There are 2 values for x, where f’(x) is 0, or the tangent is horizontal • Function (b) above is a 2ndpower of x, there will be 1 maximum • Again, this is where the derivative f’(x) is 0, or the tangent is horizontal • We see that the power function p = u*iis a second order function of the resistor RL, hence we have 1 solution for the maximum

  10. Derivative p’ = f(RL) p = i * v = i * i * RL (Eq 1) p = i2 * RL p = (VTh/(RTh+ RL))2 * RL p = RL * VTh2/(RTh+ RL)2 Power p is max, when the second-order function p = f( RL ) has a tangent with 0 incline, i.e. when the derivative dp/dRL is = 0, so we form first derivative! Use product rule and quotient rule! Note that VTh and RTh are not functions of RL so they are constant, and are 0 when derived toward RL Use product rule, quotient rule, and set : dp / dRL= 0

  11. Derivative p’ = f(RL) dp/dRL= p’ P’ = (VTh2*(RTh+RL)2-VTh2*RL*2*(RTh+RL))/(RTh+RL)4 P’ = VTh2 *((RTh+RL)2-RL*2*(RTh+RL))/(RTh+RL)4 P’ = 0 0 = (RTh+RL)2 - RL* 2 * (RTh + RL) 0 = (RTh+RL) - RL* 2 0 = RTh+ RL - RL* 2 RTh= RL

  12. Maximum Power Maximum Power transmission occurs, when the load resistance RL equals the Thévenin resistance RTh How large is that Pmax? With RL = RTh and Eq 1: Pmax = VTh2 * RL / (2 * RL)2 Pmax = VTh2 / (4 * RL)

  13. Sample Maximum Power Transfer (a) Given the circuit on the next page, find the Thévenin equivalent with VThand RTh (b) What is the maximum power delivered to RL? (c) What is the percentage of power delivered?

  14. Sample Maximum Power Transfer a 30 Ω iL + 360 V - RL 150 Ω b Sample CVS with 30 and 150 Ω Resistors

  15. (a) Find ThéveninEquivalent • VTh is voltage at open plugs a and b • iTh is short-circuit current at plugs a and b • RTh = VTh / iTh • VTh= 360 * 150 / 180 = 300 V • iTh = 360 / 30 = 12 A • RTh= 300 / 12 = 25 Ω

  16. Sample Maximum Power Transfer a a 30 Ω 25 Ω iL iL + 360 V - + 300 V - RL RL 150 Ω b b Thevenin Equivalent of Sample CVS Sample CVS with 30 and 150 Ω Resistors

  17. (b) Maximum Power Delivered to RL • Maximum power is delivered with RL = RTh • pTh = i * v • Voltage at RL is half of VTh = 300 V, VL= 150 V • pTh= 150 * 300/50 = 900 W

  18. (c) Percent of Power Delivered • RL in original circuit is = RTh = 25 Ω • RL parallel to 150 Ω in series with 30 Ω is 360/7 • Percent = pTh / p360 • p360 = v * i • i = v / (360 / 7) = 360*7 / 360 = 7 A • P360 = 360 * 7 = 2520 W = 2.52 kW • Percent = 2,520 / 900 = 0.357129 = 35.71 %

More Related