1 / 20

How To Determine The Integrity of an Ethernet Line

How To Determine The Integrity of an Ethernet Line. Design Team 7 Mark Jones Sedat Gur Ahmed Alsinan Brian Schulte Andy Christopherson. Introduction. Ethernet History and Structure Time Domain Reflectometry Active Link Cable Diagnostics Digital Spectrum Analysis

herbst
Download Presentation

How To Determine The Integrity of an Ethernet Line

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. How To Determine The Integrity of an Ethernet Line Design Team 7 Mark Jones Sedat Gur Ahmed Alsinan Brian Schulte Andy Christopherson

  2. Introduction • Ethernet History and Structure • Time Domain Reflectometry • Active Link Cable Diagnostics • Digital Spectrum Analysis • Power-over-Ethernet Detect • Output Data

  3. History of Ethernet • Computer based networking technology for Local Area Networks (LANs) • Developed by Xerox in Early 70’s • Used for approximately 85% of world’s LAN-connected PCs and workstations • Implemented with multiple types of cable • Coaxial • Twisted Pair • Fiber Optic

  4. Twisted Pair Wires • Used in many Ethernet and telephone systems • Receiver takes the difference between the wire pair • Any interference in signal will be canceled out • Advantages • Cables are thin, easy to run throughout building • Flexible • Cheap to manufacture • Disadvantages • Resistance to electromagnetic interference depends on pair twisting scheme used

  5. Twisted Pair Standards • Category 3 • Up to 10 Mbps • Bandwidth up to 16 MHz • Popular in early 90’s • Category 5 • Used for mainly 100Mbps networks • Bandwidth up to 100Mhz • Category 5e • Enhanced version of Category 5 • More rigorous standards • Recommended for most networks • Category 6 • Bandwidth up to 250MHz • Recommended for gigabit speeds

  6. So what kind of errors are we looking for? • Opens and Shorts • Cable impedance mismatch • Bad connectors • Terminations mismatches • Water damage • Any other discontinuities • Also can find cable length

  7. Time Domain Reflectometry • Will diagnose opens, shorts, cable impedance mismatch, bad connectors, termination mismatches, etc. • Uses reflections to find these errors and their locations

  8. Time Domain Reflectometry • Pulse is transmitted of known amplitude down twisted pairs • Reflects off imperfections and faults • Measure return time and amplitude of reflections

  9. Time Domain Reflectometry • With the gathered data we can find • Distance and Magnitude (Impedance) • Non-terminated Cables (Opens and Shorts) • Discontinuities (Bad Connectors) • Improperly Terminated Cables

  10. Time Domain Reflectometry

  11. Active Link Cable Diagnostics • Use of passive digital signal processing • Will find cable length with active cable • Uses predefined parameters based on the cable properties • High accuracy cable length

  12. Spectrum Analysis • Analog Spectrum Analysis • Uses a variable band-pass filter • Digital Spectrum Analysis • Uses Discrete Fourier Transform • Results in frequency spectrum of our signal

  13. Digital Spectrum Analysis • Gives magnitude of the frequency response • This will show us how the signal is spread out along the frequency spectrum • Allow us to see noise along the line • Especially how it relates to the length of the cable

  14. Power-over-Ethernet Detect • Power can run over 2 pairs of wires while data is on the remaining 2 pairs • Power is supplied by a PSE and received by the PD. • 42~57 Volts

  15. Power-over-Ethernet Detect • Detection Level can be varied as well as Turn-on and Turn-off voltages

  16. PHY to MAC Communication • PHY Layer • Transmission of raw bits, not logical data • MAC Layer • Logical communication

  17. PHY to MAC Communication • Microcontroller (MCU) • Able to communicate with PHY layer • Uses Media Independent Interface (MII)

  18. Readable Interface • Microcontroller can be programmed to send data to • LCD Display • Computer • LEDs

  19. PHY to YOU

  20. Conclusion • Ethernet History and Structure • Time Domain Reflectometry • Active Link Cable Diagnostics • Digital Spectrum Analysis • Power-over-Ethernet Detect • Output Data • QUESTIONS?

More Related