1 / 16

Gas Leakage Detector System

Gas Leakage Detector System. System Presentation By Kaihatsu Techno Centre Pvt. Ltd. Introduction. Compress Natural Gas (CNG) & Liquid Petroleum Gas (LPG) are common gases used in home & automobiles. Chemically, they are formed with the derivatives of Methane, Butane & Propane.

heman
Download Presentation

Gas Leakage Detector System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Gas Leakage Detector System System Presentation By Kaihatsu Techno Centre Pvt. Ltd.

  2. Introduction • Compress Natural Gas (CNG) & Liquid Petroleum Gas (LPG) are common gases used in home & automobiles. • Chemically, they are formed with the derivatives of Methane, Butane & Propane. • Although they are very user friendly & less pollutants, they are hazardous if leakage occurs by any accident. Kaihatsu

  3. Danger Zones • In homes & automobiles, these gases are stored in one place and used at other place. They are often carried using pipelines. • These pipelines are made up of rubber or have joints & bends. Over years these points wear out & gas leakage occurs. Kaihatsu

  4. These gases have Lower Explosive Limit. These means if the amount of Gas in the air increases more than certain percentage, the complete air becomes flammable. A slight spark by accident, will blow off everything. Where these Gases are used, sparks are too common. E.g. in automobile engine there is a spark plug generating a spark. In home, gas is used in kitchen where the flame is common. Accidents Spots Kaihatsu

  5. Leakage in Gas is detected using a Gas Sensor. These Sensors are pre-heated for 2.5 minutes. Their resistance inversely changes with the amount of gas, present in air. By monitoring the resistance, one can find out the gas leakage in air. How to Detect Leakage? Kaihatsu

  6. Why to Use Gas Leakage Detector Alarm System from Kaihatsu? Salient Features and Comparison with other products in Market. (All points may not be applicable to all products available in market)

  7. Leakage detection level in other products is done using analogue resistance comparison by adjusting variable resistor (potentiometer or trim pot) Their value changes over time period & due to environmental effects. Hence, Leakage level shifts over the period of use. Kaihatsu system does not use any analogue values. The comparison values are stored in digital memory of microcontroller. Hence, no deteoretion of values over time and no environmental effect. Effect is always correct leakage level detection over any time frame. Microcontroller Driven – Full Digital Kaihatsu

  8. As one can see from the graph in slide 5, the leakage level shifts with the ambient temperature. In other products this shift is not accounted for. Hence the product works over restricted temperature range. Kaihatsu system used a thermister to detect ambient temperature. One thermister per sensor compensating ambient temperature effect. Effect is always correct leakage level detection over any temperature range from -100C to +650C. Accurate at all Temperature Kaihatsu

  9. Once in million, there may be a chance that the sensor, heater in sensor or thermister may fail. In other products there is no failure detection system. Under this condition, even if there is a leakage, it will not be detected & a Cates trophy can occur. Remember Boeing theory, major accidents are due to two systems failure at same time. Kaihatsu system detects any failure in sensor or heater in sensor or thermister. This gives a warning, that although the case may be once a million, the detection system is incompetent to detect the leakage. Effect is the user is on alert when the detection system fails and can go for repairs or replacement. Sensor Failure Detection Kaihatsu

  10. Most of the product in the market has only one detection level. 5% of Lower Explosive Limit. Most of the cases leakage does not occur immediately. Due to slow wearing of tubes, a small leakage starts and then gradually reaches to the 5% level. In other products, this gradual increase is not detected and suddenly one fine day, the gas system stops. Kaihatsu system detects leakage level in Five steps. 1%, 2%, 3%, 4% and then 5%. Therefore in most of the cases, leakage is detected earlier. Effect is the user can take corrective measures when he or she has a time to attend and the automobile or home gas supply does not stop suddenly on one fine (or shall we call bad) day! Early Leakage Warning Kaihatsu

  11. Most of the product in the market immediately cut off the gas supply as soon as the leakage level is reached. Imagine you are driving a car on the middle of the highway, leakage occurs and the car gas supply is cut off. A fetal accident can take place due to sudden stoppage of car. These accidents could be more dangerous than gas explosion itself! Kaihatsu system detects leakage level. If the leakage level reaches 5% of Lower Explosive Limit, it starts harsh audio alarm for indication. It then allows 2.5 minutes before it actually cuts off the gas supply. Effect is the user can safely pull over the car by the side of the road, stop the engine without causing any dangerous situation on highway. Delayed Gas Supply Cut Off Kaihatsu

  12. Most of the product in the market has only one sensor. May a times one needs to detect a leakage at two places. E.g. in automobiles one sensor is in main unit in engine & other unit near gas cylinder in dickey. Or in home main unit at kitchen & other unit at storage room where cylinders are stored. This feature is not available in most of the other products. One needs to purchase two units. Kaihatsu system has additional sensor input unit. This is a full plug & play system. Means second sensor can be purchased any time and can be just connected to system without any change or configuration adjustment. Best part is, second sensor comes with thermister so two sensors can work at different temperatures. Both sensors has failure detection systems Plug & Play Duel Optional Sensor Kaihatsu

  13. Most of the products in the market can be used either for home or for cars. Kaihatsu system has a unique design that can be changed from home use to car use & vice Vesa any time, without need of any technical expertise. Car or Home Changeable Design Kaihatsu

  14. Most of the products in the market use normal plastic enclosure and normal wires. Kaihatsu system uses industrial grade enclosures and fire retardant wires for better safety. Mechanical Kaihatsu

  15. We Hope that You like this Product Kaihatsu

  16. Thank you Kaihatsu Techno Centre Pvt. Ltd. 2005

More Related