1 / 22

Terrestrial Tensor GW Detector with Superconducting Instrumentation

This research paper discusses the development of a terrestrial antenna-based GW detector using superconducting instrumentation to fill the missing bandwidth in the 0.1 to 10 Hz range. The paper explores different detector options, noise mitigation techniques, and suspension methods.

Download Presentation

Terrestrial Tensor GW Detector with Superconducting Instrumentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Terrestrial Tensor GW Detector Based on Superconducting Instrumentation Ho Jung PaikUniversity of MarylandGW Astronomy, Korea August, 2016

  2. GW detector bandwidths Missing frequency band • Merger of IMBHs and inspiraling stellar mass BHs are expected to produce signals at 0.1 to 10 Hz bandwidth. • Even if LISA flies, the middle frequency band will be missed. DECIGO, space interferometer, has been proposed to fill this band. • Could a terrestrial antenna be built to fill this missing band? Paik

  3. Long-baseline resonant-mass detector • In the Newtonian limit, Gravity gradiometer is a GW detector. Paik

  4. Analyzed three detector options: 1. Atom-laser interferometer 2. TOBA with laser interferometer 3. Michelson interferometer • Low-frequency detector would be astrophysically interesting, if one can reach Sh½(f ) = 1020 Hz1/2in 0.1-10 Hz band. Paik

  5. Newtonian gravity noise • Seismic and atmospheric density modulations cause Newtonian gravity gravity gradientnoise (NN). • At 0.1 Hz, s ~ 35 km >> L. Gravity gradient noise  L. Newtonian noise (NN) Rayleigh wave NN residual Infrasound NN subtraction • Need to develop more sensitive seismometers and microphones. • NN from infrasound can be mitigated only at certain incident angles. Detecting and removing NN appears to be extremely challenging. Paik

  6. SGG (Superconducting Gravity Gradiometer) • Sensitive SGGs have been under development for over 30 years at UM. 3 x 10-11 Hz-1/2 Moody et al., RSI 73, 3957 (2002) • Test masses are mechanically suspended (fDM ~ 10 Hz). • CM platform vibration noise is rejectedto 3 parts in 108. • By early 1990’s, SGG achieved amplitude sensitivity 102 times better than TOBA and 103 times better than atom interferometers to date. Paik

  7. Tensor SGG with levitated test masses • More sensitive SGG is under development with NASA support. • Test masses are magnetically suspend (fDM ~ 0.01 Hz). 102-103 times higher sensitivity Test masses are levitated by a current induced along a tube. Six test masses mounted a cube form a tensor gradiometer. Paik

  8. Improved CM rejection • Sensitive axes are aligned to  10-6 rad insituusing Cryo Linear Actuator PiezoKnobs (Janssen Precision Eng). CMRR = 106 • Residual CM errors are compensated to 10-4. CMRR = 1010 Intrinsic noise of the SGG for Earth science mission Paik

  9. + polarization x polarization SOGRO (Superconducting Omni-directional Gravitational Radiation Observatory) • Each test mass has 3 DOF. • Combining six test masses, tensor GW detector is formed. • Source direction (, ) and wave polarization (h+, h) can be determined by a single antenna. “Spherical” Antenna Paik

  10. Antenna pattern LIGO Sky location of GW150914 polarization +polarization rms sensitivity SOGRO Total Sky location by SOGRO Off-diagonal Diagonal Paik

  11. Design philosophy of SOGRO • Extremely low detector noise is required. Low T, high Q, nearly quantum-limited amplifier. • Test mass suspension frequency should be lowered to below the signal bandwidth. Almost free test masses by magnetic levitation. • Seismic noise is very difficult to isolate at low frequencies. HighCM rejection in a superconducting differential accelerometer. • Newtonian noise increases sharply below 10 Hz and cannot be shielded. Tensordetector can help mitigate the NN. H. J. Paik, C. E. Griggs, M. V. Moody, K. Venkateswara, H. M. Lee, A. B. Nielsen, E. Majorana and J. Harms, Class. Quantum Grav. 33, 075003 (2016) Paik

  12. Suspension of SOGRO platform • Go underground(~ 1 km) to reduce the seismic and Newtonian noise, as well as to be far away from moving objects. • Platform needs to be rigid with all DM modes > 10 Hz with Q > 106. Careful engineering design is required. • Nodal support prevents odd harmonics from being excited. • 25-m pendulum gives fp = 0.1 Hz for two horizontal modes and f < 103 Hz for torsional angular mode, and completely decouples ground tilt. Provides passive isolation. • Additional passive or active isolation may be needed for vertical direction. Pendulum suspension from center Alternative suspension: Optical rigid body Simpler cryogenics, larger baseline ( 1 km?) Paik

  13. Magnetic levitation • To provide large area for levitation, test mass is made in the shape of square Nb shell with flanges. • Magnetic field required to levitate test mass: • Horizontal DM frequencies can all be tuned to 0.01 Hz. • However, due to nonlinearities, strong levitation fields will cause vertical DM frequencies > 0.1 Hz. Vertical accelerometers will be noisier. • Since the platform is isolated from tilt of the ground,hxz and hyz can also be obtained from horizontal motions of test masses only. Paik

  14. Tuned capacitor-bridge transducer • Near quantum-limited SQUIDs have 1/f noise below 10 kHz. • Signal needs to be upconverted to  10 kHz by using active transducer. • Capacitor bridge coupled to nearly quantum-limited SQUID thru S/C transformer. (Cinquegrana et al., PRD 48, 448 (1993)) • Bridge is driven at LC resonance frequency p . • Oscillator noise is rejected by the bridge balance. Maintain precise balance byfeedback. Paik

  15. Achievable detector noise • SOGRO requires QD ~ 109 for test masses and Qpl ~ 107 for the platform. • By using two-stage dc SQUIDs, 120 and 10 have been demonstrated at 1.5 and 0.1 K, respectively. (Falferi et al., 2003; 2008) SOGRO requires improvement by a factor of 5-6. Paik

  16. Potential sensitivities of SOGRO • SOGRO would fillfrequency gap 0.1 to 10 Hz between the terrestrial and future space interferometers. Paik

  17. Platform thermal noise • Internal damping model: Thermal displacement noise PSD becomes where M is the effectivemassof the platform and Q = 1/. • Desirable to locate test masses at nodesof the mode, M  . Very challenging due to the presence of multiple modes • Platform design needs to be optimizedto minimize its thermal noise. Preliminary analysis with ANSYS Paik

  18. Astrophysics with SOGRO • SOGRO could detect IMBH binaries with 103-104M◉ at a few billion light years away, and WD binaries within the Local Group. • aSOGRO would be able to detect BH binaries like GW150914 with SNR ~ 10. Alert interferometers days before merger. Paik

  19. Seismic noise At 1 Hz Seismic background Axis alignment and scale factor match Error compensation SOGRO intrinsic noise aSOGRO intrinsic noise Passive/active isolation 109 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 Seismic noise of underground sites Amplitude noise level (m Hz1/2) • 200-220 dB isolation/rejection is required. • CMRR = 1010 0-20 dB isolation required. • Pendulum suspension provides sufficient passive isolation for angular and horizontal accelerations. • 0-20 dB passive/active isolation must be provided to vertical acceleration. Paik

  20. Newtonian gravity noise • Seismic and atmospheric density fluctuations produce NN. • GWs are transversewhereas near-field Newtonian gradient is not. Could GW signal be separated out from NN? • Tensor measurement is insufficient to remove NN from multiple waves. Still requires external seismometers and microphones. Paik

  21. Mitigation of NN NN due to infrasound removed by using h’13, h’23, h’33 and 15 mikes of SNR = 104, 1 at the detector, 7 each at radius 600 m and 1 km. NN due to Rayleigh waves removed by using h’13, h’23, h’33, az (CM), plus 7 seismometers with SNR = 103 at the radius of 5 km. • First remove Rayleigh NN by using seismometers only, then remove infrasound NN by using microphones and cleaned up SOGRO outputs. • Unlike TOBA and laser interferometer, SOGROcan remove NN from infrasound for all incident angles. Harms and Paik, PRD 92, 022001 (2015) Paik

  22. Conclusion and summary • By using six levitated superconducting test masses, low-frequency tensor GW detector can be constructed. A single SOGRO could locate source and determine polarization. • SOGRO is uniquely capable of CM rejection and full-tensordetection. SOGRO couldovercome the seismic and Newtonian noise. • With h 1020 Hz1/2 at 0.1-10 Hz, SOGRO could detect IMBH binaries at a few billion light years away, as well as BH binaries like GW150914. SOGRO could alert laser interferometers days before merger. • Test masses of 5-10 tons each and 3D platform of arm-length 30-100 m(100-300 tons) need to be cooled to below 4 K. Large-scale civil, mechanical, and cryogenic engineering is required. • Very high Q’s must be obtained for test masses and platform, and nearly quantum-limited transducer-SQUID system must be developed. Materials science and detector technology must be advanced. SOGRO is a multi-disciplinary project like LIGO, Virgo and KAGRA. Paik

More Related