1 / 30

Innovative Approach to Temporary Fixed Bridge Fabrication Using Invisible Plate Technique

This case report by Mohammed Ali al-Asiri outlines the clinical procedures involved in creating a temporary fixed bridge using an innovative invisible plate technique. The report details the cleaning, disinfecting, and cutting processes for the flanges, as well as the preparation of the cast base utilizing the Biostar pressure-molding machine. A comprehensive overview of the fabrication steps, including die preparation, post and core pinning, and finishing processes, is provided. This work aims to enhance the understanding of effective interim solutions in dental practice.

hasana
Download Presentation

Innovative Approach to Temporary Fixed Bridge Fabrication Using Invisible Plate Technique

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CLINICAL PRACTICING CASE REPORT MOHAMMED ali al-ASIRI 425102633

  2. Invisible plate FIXED POST AND CORE Temporary BRIDGE FIXED BRIDGE

  3. Invisible plate

  4. disinfectant Cleaning and cutting the flanges Bouring trimming

  5. Clean the cast and apply Separating medium acriyl Light cure

  6. Biostar pressure-molding machine

  7. Mark the cast Put the Invisible plate on the cast Clean it

  8. Cut the plate Keep it on the cast

  9. FIXED POST AND core

  10. disinfectant Cleaning and cutting the flanges Bouring trimming

  11. Post and core pinning Fabricate Cast base

  12. Cutting the die Add separating medium to the die Fabricate the post Fabricate the core

  13. Use the lens to make margin Remove the post & core from the die Spruing investment

  14. Wax elimination + casting + sand plaster + finishing+despruing Post and core on the die preparation

  15. Coping +spruing Try in

  16. Oxidation laeyer opaque

  17. Dentane and enamel Staning and glaez

  18. TMPORARY BRIDGE FOUR UNIT

  19. POURING CLAENING

  20. Wax up with anatomy impression acryel

  21. Finishing + polishing

  22. FIXED BRIDGE Four UNIT

  23. POURING CLAENING

  24. Die spaecer Separating medium

  25. Wax up + cut back Metal coping

  26. Oxidation laeyer opaque Dentane and enamel

  27. THANK YOU

More Related