1 / 29

Ethernet and switches selected topics

Ethernet and switches selected topics. Agenda. Scaling ethernet infrastructure VLANs. Build Incrementally. Start small. Fiber link to distribution switch. Switch. Hosts. Build Incrementally. As you have demand and money, grow like this:. Aggreg. Switch. Hosts. Build Incrementally.

harper
Download Presentation

Ethernet and switches selected topics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Ethernet and switchesselected topics

  2. Agenda • Scaling ethernet infrastructure • VLANs

  3. Build Incrementally • Start small Fiber link to distribution switch Switch Hosts

  4. Build Incrementally • As you have demand and money, grow like this: Aggreg. Switch Hosts

  5. Build Incrementally • And keep growing within the same hierarchy: Aggreg. Switch Switch Hosts Hosts

  6. Build Incrementally • At this point, you can also add a redundant aggregation switch: Aggreg. Aggreg. Switch Switch Hosts

  7. Do not daisy-chain • Resist the temptation of doing this: ✗

  8. Connect buildings hierarchically

  9. Agenda • Scaling ethernet infrastructure • VLANs

  10. Definition • LAN • Broadcast domain

  11. Local VLANs Switch VLAN X VLAN Y VLAN X nodes VLAN Y nodes

  12. Virtual LANs (VLANs) • Allows us to split switches into separate (virtual) switches • Only members of a VLAN can see that VLAN’s traffic • Inter-VLAN traffic must be routed (i.e. go through a router) because they are separate subnets

  13. Some Hosts Need Privacy/Separation

  14. VLAN introduction • VLANs provide segmentation based on broadcast domains. • VLANs logically segment switched networks based on the functions, project teams, or applications of the organization regardless of the physical location or connections to the network. • All workstations and servers used by a particular workgroup share the same VLAN, regardless of the physical connection or location.

  15. Local VLANs • 2 VLANs or more within a single switch • VLANs address scalability, security, and network management. Routers in VLAN topologies provide broadcast filtering, security, and traffic flow management. • Edge ports, where end nodes are connected, are configured as members of a VLAN • The switch behaves as several virtual switches, sending traffic only within VLAN members. • Switches may not bridge any traffic between VLANs, as this would violate the integrity of the VLAN domain. • Traffic should only be routed between VLANs.

  16. Broadcast domains with VLANs and routers 10.1.0.0/16 • Without VLANs, each group is on a different IP network and on a different switch. • Using VLANs. Switch is configured with the ports on the appropriate VLAN. Still, each group on a different IP network; however, they are all on the same switch. • What are the broadcast domains in each? 10.2.0.0/16 Without VLANs: 10.3.0.0/16 One link per VLAN or a single VLAN Trunk (later) 10.1.0.0/16 With VLANs 10.2.0.0/16 10.3.0.0/16

  17. VLANs • Important notes on VLANs: • VLANs are assigned to switch ports. There is no “VLAN” assignment done on the host. • In order for a host to be a part of that VLAN, it must be assigned an IP address that belongs to the proper subnet. Remember: VLAN = Subnet Two VLANs = Two subnets

  18. VLANs ARP Request • VLANs separate broadcast domains == subnets.e.g. without VLAN the ARP would be seen on all subnets. • Assigning a host to the correct VLAN is a 2-step process: • Connect the host to the correct port on the switch. • Assign to the host the correct IP address depending on the VLAN membership Two VLANs = Two subnets

  19. VLAN operation • As a device enters the network, it assumes the VLAN membership of the port to which it is attached. • The default VLAN for every port in the switch is VLAN 1 and cannot be deleted. (This statement does not give the whole story. More in the lab later for interested groups…) • All other ports on the switch may be reassigned to arbitrary VLANs.

  20. VLANs across switches • Two switches can exchange traffic from one or more VLANs • Inter-switch links are configured as trunks, carrying frames from all or a subset of a switch’s VLANs • Each frame carries a tag that identifies which VLAN it belongs to

  21. VLANs across switches • VLAN tagging is used when a single link needs to carry traffic for more than one VLAN. No VLAN Tagging VLAN Tagging

  22. VLANs across switches Tagged Frames 802.1Q Trunk Trunk Port VLAN X VLAN Y VLAN X VLAN Y Edge Ports This is called “VLAN Trunking”

  23. 802.1Q • The IEEE standard that defines how ethernet frames should be tagged when moving across switch trunks • This means that switches from different vendors are able to exchange VLAN traffic.

  24. 802.1Q tagged frame

  25. Tagged vs. Untagged • Edge ports are not tagged, they are just “members” of a VLAN • You only need to tag frames in switch-to-switch links (trunks), when transporting multiple VLANs • A trunk can transport both tagged and untagged VLANs • As long as the two switches agree on how to handle those

  26. VLANS increase complexity • You can no longer “just replace” a switch • Now you have VLAN configuration to maintain • Field technicians need more skills • You have to make sure that all the switch-to-switch trunks are carrying all the necessary VLANs • Need to keep in mind when adding/removing VLANs

  27. Good reasons to use VLANs • You want to segment your network into multiple subnets, but can’t buy enough switches • Hide sensitive infrastructure like IP phones, building controls, etc. • Separate control traffic from user traffic • Restrict who can access your switch management address

  28. Bad reasons to use VLANs • Because you can, and you feel cool  • Because they will completely secure your hosts (or so you think) • Because they allow you to extend the same IP network over multiple separate buildings

  29. Do not build “VLAN spaghetti” • Extending a VLAN to multiple buildings across trunk ports • Bad idea because: • Broadcast traffic is carried across all trunks from one end of the network to another • Broadcast storm can spread across the extent of the VLAN • Maintenance and troubleshooting nightmare

More Related