1 / 29

Shattered: Forensic Glass Analysis

Shattered: Forensic Glass Analysis. What is Glass?. “An inorganic product of fusion which has cooled to a rigid condition without crystallizing” Uniform amorphous solid No specific m.p. Softens over a temperature range. 'Ordinary' sheet glass

Download Presentation

Shattered: Forensic Glass Analysis

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Shattered: Forensic Glass Analysis

  2. What is Glass? • “An inorganic product of fusion which has cooled to a rigid condition without crystallizing” • Uniform amorphous solid • No specific m.p. • Softens over a temperature • range

  3. 'Ordinary' sheet glass -made by passing the molten glass through rollers; process gives an almost flat finish but with distortions. -glass is used in glazing greenhouses and garden sheds where the visual distortions do not matter. Float glass (plate) Float glass gets its name from the method of production used to manufacture it. -molten glass is 'floated' onto a bed of molten tin -produces a glass which is flat and distortion free -process imparts a fluorescence to the glass [UV light]

  4. Rolled Glass Float Glass Float Glass Process

  5. Toughened (Safety glass) -glass is produced by applying a special treatment to ordinary float glass after it has been cut to size and finished. -treatment involves heating the glass so that it begins to soften (about 620 C) and then rapidly cooling it. -produces a glass which, if broken, breaks into small pieces without sharp edges. Laminated glass -glass is made up of a sandwich of two or more sheets of glass (or plastic), bonded together by a flexible, normally transparent material. -if cracked or broken, the flexible material is designed to hold the glass fragments in place.

  6. What’s in Glass? • Network Components-Formers: SiO2, B2O3, P2O5, GeO2, V2O5, As2O3, Sb2O5 • Fluxes–Softeners [lowers melting point]: Na2O, K2O, LiO, Al2O3, B2O3, Cs2O • Stabilizers–Chemical/Corrosion Resistance: CaO, MgO, Al2O3, PbO, SrO, BaO, ZnO, ZrO

  7. Major Types and Uses • Soda lime silicate glass SiO2 + Na2O / K2O + CaO / Al2O3 / MgO • Flat glass, container glass, electric light bulbs • Borosilicate glass > 5% B2O3 (replaces Na2O) Lab glassware, thermometers, cookware, sealed-beam headlights

  8. Aluminosilicate glass • Higher percentage of aluminum • higher temperatures than borosilicate • Aluminoborosilicate – 50:50 Al/B • Labware, cookware, and glass fibers • Lead alkali silicate (leaded glass) • Up to 80% PbO • high refractive index • “Crystal” tableware,

  9. Different glasses-domestic windows, car headlamps, light bulb glass-are produced differently from different chemistries.

  10. Forensic Individualization of Glass • Flat Glass–Soda lime silicate -Rolling or Floating • Tempered: Rapid Cooling • Adds Strength • Dices when broken • Automotive windows & security windows • Float Glass floresces when excited at 254 nm.

  11. Coated: Surface modification • Mirrors • Laminated: Sandwiched around plastic • Automotive windshields • Headlights: often borosilicate • Light bulbs: soda lime glass • Heat absorbing/ UV filtering • tinting • Eyeglasses: prescription lenses/photosensitive

  12. Container Glass • Lower magnesium, higher sodium • Clear vs. greenish (window) • Glass Fibers • Fiberglass insulation • Alumino-borosilicate • Binder (red or yellow) to hold fibers in bundles

  13. Forensic Analysis of Glass Fundamental Question: Is it Glass? • Isotropic vs. Anisotropic • Glass: Isotropic • dark when rotated under crossed polarizers • Crystalline solids and plastics: Anisotropic • Change retardation when rotated under crossed polarizers • Hardness • Solubility

  14. Comparison of Physical Characteristics • Color • Flatness • Thickness • Fluorescence–Float Glass • 254 nm

  15. Physical Properties • Density • Sink-Float Method • CHBr3, C2H2Br4, Sodium Polytungstate • Density Range: 2.465-2.540 g/cm3

  16. When 2 substances have different RI, light passing through them produces a Becke Line A Becke line is a band or rim of light visible along a grain/crystal boundary in plane-polarized light.

  17. Glass analysis is often performed using our old friend the PLM -the goal of glass analysis by PLM is to individualize an evidence glass fragment to an exemplar from a crime scene [primary or secondary]

  18. Populations of Glass RIs

  19. GRIM II System -automated system for matching glass RI -uses a step-heating stage and a RI liquid that varies with temperature

  20. GRIM II identifies the RI match by monitoring a video image of the glass fragment in the liquid -as it is heated/cooled the contrast is measured until a minimum is reached-the match point

  21. Chemical Composition – • Inductively Coupled Plasma (ICP) • SEM/EDS • Neutron Activation Analysis • X-Ray Fluorescence

  22. How does Glass break? Forensic Fracture Analysis

  23. Radial Begin at a point and radiate outward from point of impact -initial crack is on the side opposite the applied force

  24. Concentric Motion of the projectile through the glass puts tension on the front surface of the glass, causing concentric fractures. -high-speed projectile [a rock] penetrates the glass, it leaves an exit hole larger than it's entrance hole. -helps to determine the direction on impact.

  25. A determination of the direction of force in breaking a window pane: • -direction of the rib marks • [stress marks on broken edges of glass that are perpendicular to one side of glass] • For radial fractures (radiating from the center): • - the direction of the force is on the same side as the tangential parts of the rib marks.

  26. It’s possible to determine the bullet's direction by noting the side of the cone- shaped hole left by the bullet. -small opening is on the entrance side Bullets and Glass

  27. Counting Bullet Holes Determination of the sequence of bullet holes can be made by noting the radial fractures. Radial fractures caused by the passage of a bullet stop at pre-existing fracture.

More Related