RC & M Remote Control and Management System

1. RC & MRemote Control and Management System System of remote control and monitoring of telecommunication network sites

2. Purpose of RC&M Remote control, management and monitoring of network and base stations equipment RBS, MSC and other network sitesof mobile network operators.

3. Purpose of RC&M Complex provides data collection from different sources, that are used on a site (temperature/humidity sensors, electricity meters, alarm, fire and security sensors, uninterruptible power supplies system (UPS), emergency power supply system (Diesel Generators sets), network analyzers etc. and transfer of this data to upper level (database and automated operator workplace).

4. Purpose of RC&M Complex gives possibility of remote control from operator workplace to network equipment, BTS, uninterruptible power supply systems, emergency power supply systems, climate systems, etc. Complex provides organization of video security and access control to sites.

5. Main functions of the system Control and monitoring of climate parameters - temperature and humidity Control and monitoring of environmental parameters - gas and dust pollution Security and fire alarm, room flooding alarm Warning and alarm, forming messages about exceeding the regulated values ​​of control parameters

6. Main functions of the system Control, management and monitoring of uninterruptible power supply systems (UPS) Control, management and monitoringof the emergency power supply systems (Diesel etc.) Remote data collection of energy consumption on the network sites Automation of data processing for the calculation of the consumed electricity

7. Main functions of the system Dynamic correction of functioning of telecommunication site - BTS, DXX, XDM, MiniLink Remote access from site to a corporate computer network Video Security. Monitoring, video recording with a long-term storage Access control to the remote site and to individual rack units

8. Main functions of the system System operability monitoring Fault management and process tracking (FM) Sending SMS and E-mail messages to responsible staff Administration and audit of users Inventory management of company engineering structure resources

9. Components of RC&M Controller PVS LX Server with RC&M software User program RC&M Monitor Service software

10. System architecture of complex

11. Network topology

12. Sensors and system equipment

13. ControllerPVS-LX Hardware specifications: • Computer: CPU ARM9 544 MHz; DRAM 128 MB; Flash 32 MB • Interfaces: 3x LAN, 1x WAN Ethernet 10/100 BaseT (RJ45); 2xE1 • 4/8/16xSerial RS-232/RS485/С2; 2x USB 2.0; 1x 1-Wire; • 16x 3-level digital inputs; 3x outputs relay contacts • Temperature: -20℃～+55℃ • Supply: 48V or 24V DC or 220V AC • Form factor: 1U rack

14. Controller PVS-LX Software specifications and protocols: • OS:Linux Kernel Version: 2.6.27 • Network protocols:TCP, UDP, IPv4, SNMP(v1,v2), ICMP, ARP,SSH, DHCP,Telnet, FTP, PPP, DNS, HTTP, HTTPS, SMS, SMTP, SSL • Transfer protocols: RS232/RS485/С1,Modbus over TCP/ІР • Telecontrol protocol: IEC 60870-5-104 • Electrical meter protocol:IEC61107, IEC1142,IEC 61334 (DLMS/COSEM) • Security data: Secure Real COM, Secure TCP Server, • Secure TCP Client и Secure Pair Connection

15. Components of RC&M Climate control system Alarm system Electricity accounting system Video security system Access control system Fault Management system

16. Components of RC&M Control of uninterruptible (UPS) and emergency (Diesel etc.) power supply systems Control and management of network equipment Administration of access permissions Creating and editing forms of reports Inventory management of resources

17. Climate control system • Measurement and monitoring of temperature and humidity • Profile rendering with charts • Coolers/heaters autonomous/remote on/off • Formation of alarm messages in case of limits exceeding

18. Alarm system • Signal discrete inputs monitoring of a fire and security alarm systems, backup power, etc. • Formation of alarm messages about FMS event for responsible staff and for external information processing system • Alarm system administration

19. Electricity accounting system • Automatic data collection of technological and commercial electricity consumption accounting for each accounting point (group) for defined commercial intervals • Accumulation, processing, storage in database and accounting parameters documenting for each accounting point • Comparative analysis of electricity consumption of similar sites • Control of electric power parameters (current, voltage, cos φ, frequency) at a given polling interval

20. Consumed electricity calculation system • Calculation of average consumption, taking into account losses • Providing multi-tariff zone accounting of electricity consumption (rates are registered separately for each accounting point) • Accounting contracts maintenance with electricity suppliers • Forming electricity consumption reports (daily, monthly, annual) • Control of electricity consumption limits • Summary of electricity balance in the estimated group • Export data to other commercial systems

21. Video security system • Twenty-four-hour simultaneous video monitoring of many different points or premises on one monitor with the ability to track movement in the frame • Divided video monitoring record with ability to view recordings at any time for further analysis • Synchronous alarm tracking and reactions to these events

22. Fault management system (FM) • Monitoring of presence and fixation of connection absence with controllers and equipment that is connected to it • Fixation of alarm system messages • Management and process tracking of fault searching and fault elimination • Formation of alarm messages about FMS event for responsible staff and for external information processing system

23. Administering of access rights of users • System user registration • Granting access permissions to system, individual objects and components • User actions registration (audit)

24. Creating and editing forms of reports • Create and save blanks of reports • Automatic reports filing with system processed data • Print and export to other forms of reports

25. Inventory management of resources • Accounting of RC&M system equipment and connected devices • Automatic, with a set period of time, equipment inventory • Equipment replacementregistration

26. Diagnostics of network equipment operation • Remote diagnostics of network equipment condition(switches, controllers, base radio stations, etc.) • Adjustment parameter change

27. Control and management of uninterruptible power supply (UPS) systems • Remote control of parameters • Adjustment parameter change • Periodic testing of rechargeable batteries • Diagnostics ofuninterruptible (UPS) power supply system

28. Control and management of emergency power supply systems (diesel generators) • Remote start/stop of generator • Remote load on/off • Control of voltage, current, frequency, battery voltage • Control of oil temperature, level and pressure • Control of fuel level, condition and running time

29. Free cooling systems remote control • Setting parameters of operation • FreeCooler on/off • Control of temperature and engine speed

30. Certificates of conformance PVS-ZIK

31. 9 Frankastr. Lviv 79005Ukraine tel./fax : +38 032 235 8287www.mikrokod.com.ua