1 / 15

Based on a Mirror Status Workshop Berkeley, CA. Sept. 8-9, 2008

A Materials Evaluation Neutron Source Based on the Gas Dynamic Trap (DTNS) One Element in an Urgently Needed Comprehensive Fusion Materials Program. Based on a Mirror Status Workshop Berkeley, CA. Sept. 8-9, 2008 25 Participants - 6 Labs. and 5 Universities - Japan & Russia

haile
Download Presentation

Based on a Mirror Status Workshop Berkeley, CA. Sept. 8-9, 2008

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A Materials Evaluation Neutron Source Based on the Gas Dynamic Trap (DTNS)One Element in an Urgently Needed Comprehensive Fusion Materials Program Based on a Mirror Status Workshop Berkeley, CA. Sept. 8-9, 2008 25 Participants - 6 Labs. and 5 Universities - Japan & Russia T. C. Simonen, Chair Renews Workshop March 2-6, 2009

  2. The Simple Axisymmetric Mirror A Physics & Engineering Game Changer • Simple magnet geometry stabilized by plasma exhaust • Physics established: Novosibirsk GDT Device – 60% beta, Te, classical • Extrapolates to a Dynamic Trap D-T Neutron Source (DTNS) • ~ 2 MW/m2 Neutron Flux, ~2 m2 Area, ~100 Liter Volume • Simple Geometry, Ease of Construction & Maintenance • Addresses Greenwald Gaps 10 & 13 and Initiative 7 Neutron Source

  3. GDT at Novosibirsk, Russia12 m Long with Large End Tanks to Decouple Te 3

  4. One Version of DTNS Showing Magnets, Shielding ,Neutral Beams, and Material Samples(Bobouch, Fusion Science & Tech. 41 (2002) p44)

  5. Neutron Flux Scales With Te to 4 MW/m2(for various NBI energies)

  6. DTNS Could Produce ITER-Like Neutron Energy Spectra(Fischer, A.Moslang, A.Ivanov, FE&D 48 (2000) p.307)

  7. DTNS Would Operate at Higher Magnetic Field, Neutral Beam Energy, and Power than GDT

  8. DTNS Has Two Test Zones • Neutron Flux concentrates in regions of beam ion Turning Points • One Zone could test many material samples • One Zone could test Sub-components

  9. Small Material Sample Test Assembly(Holds ~8,000 Temp. Controlled Specimens)ref: U. Fisher, A. Moslang, A.A. Ivanov, FE&D 48 (2000) p307

  10. Monte Carlo Calculation Indicates Uniform Radial-Axial Neutron Flux(r-uniformity < 5%/cm, z-uniformity < 0.1%/cm)

  11. Materials Testing Neutron Sources

  12. Summary– The DTNS is an Attractive D-T Neutron Source That Closes Gaps 10 & 13 and Initiative 7 for Materials Testing • ITER-Like Neutron Energy Spectrum • Produces 1-4 MW/m2 • Provides ~2 m2 Test Area • Provides ~100 Liter Test Volume • Uniformity < 5%/cm

  13. Suggested Next Steps • Collaboration with Novosibirsk GDT • Diagnostics (Thomson Scattering, …) • GDT-Upgrade (4 MW to 10 MW) • Theory-Modeling to • Extrapolate to DTNS (Te, MHD, DCLC, TPM ) • Seek More Efficient Design (end cells) • Deploy US Theory Capabilities (e.g. UTexas, LLNL, LANL, Lehigh, etc, etc) • Initiate DTNS Design • Construct DTNS (could be phased)

  14. Additional Benefits of DTNS Activity • DTNS Physics Has Much in Common with Other Confinement Systems • Tests Existing Modeling Capability in Very Simple Geometry • More Efficient DTNS (end cells) Leads to a Fusion-Fission Hybrid • Benefits Outside Magnetic Fusion • Fosters International Collaboration

  15. References • Gas dynamic trap as high power 14 MeV neutron source, P.A Bagryansky , et. al. Fusion Engineering and Design 70 (2004), p13-33 • Assessment of the gas dynamic trap mirror facility as intense neutron source for fusion material test irradiations, U. Fischer, A. Moslang, A.A. Ivanov, Fusion Engineering and Design, 48 (2000) p307-325

More Related