1 / 15

* 논 문 세 미 나 *

* 논 문 세 미 나 *. Some effects of different additives on dielectric and piezoelectric properties of (Bi ½ Na ½ )TiO 3 - BaTiO 3 morphotropic-phase-boundary composition. Abstract. Microstructure, dielectric and piezoelectric of (Bi 1/2 Na 1/2 )TiO 3 - 6BaTiO 3 doped with Nb 5+ , Co 3+ ,

gurit
Download Presentation

* 논 문 세 미 나 *

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. * 논 문 세 미 나 * Some effects of different additives on dielectric and piezoelectric properties of (Bi½Na½)TiO3 - BaTiO3 morphotropic-phase-boundary composition

  2. Abstract • Microstructure, dielectric and piezoelectric of (Bi1/2Na1/2)TiO3 - 6BaTiO3 doped with Nb5+ , Co3+ , or La3+ were studied for a candidate as lead-free pizoelectric ceramics. • The doping with Co3+ enhanced piezoelectric coeff -icient(d33) and lower dielectric loss. • The Co3+ doped system's intermediate phase transition almost disappeared.

  3. Introduction 1. • Bismuth sodium titanate, (Bi1/2Na1/2)TiO3 ➥ an attractive lead-free A-site complex-perovskite for high-Tc ferroelectric relaxor material. • The BNT-based ceramic materials are of interests as new candidates to replace the widely used lead-contented perovskite materials. ➪the free control of sintering atmosphere and lack of lead pollution during the process of preparation. • To improve its properties, several solid solutions of BNT with PbTiO3 SrTiO3 , (SraPbbCac)TiO3 , La2(TiO3)3 , CaTiO3 and BaTiO3 have been studied.

  4. Introduction 2. • Among these BNT-based system, (Bi1/2Na1/2)TiO3 - BaTiO3 (BNT)is more arresting. • The aim of this paper➪to investigate the effects of single and cooperative substitution on (Bi1/2Na1/2)TiO3 - 6BaTiO3 system by studying the dielectric and piezoelectric propert -ies of (Bi1/2Na1/2)TiO3 - 6BaTiO3 doped with (1 at.%)La 3+, (1 at.%)Nb5+ or (1 at.%)Co 3+.

  5. Experiment 1. • The conventional ceramic fabrication technique was used to prepare these ceramic samples. • The high purity of starting metal oxide or carbonate powders, such as Bi2O3, Na2CO3, BaCO3, TiO2, Nb2O5, Co2O3 and La2O3 were used. • The powders of these raw materials ➪ in ethanol with carnelian balls by ball-milling for 12 h➪ calcined at 1000 ℃ for 2 h ➪ were ground and ball-milled for 24 h into the fine powders and were pressed into discs, 16.4 or 12 mm in diameter and 1 mm in thickness ➪ some of these small discs as the samples were sintered at 1160-1200 ℃ for 2 h in an air atmosphere. • All samples were sintered at the temperatures leading to the maximum relative densities.

  6. Experiment 2. • FESEM(field emission scanning electron microscope) ➥ The surface micrograph of sintered samples. • Atomated diffractometer ➥X-ray diffraction patterns. • Multifrequency LCR meter ➥Temperature dependence of dielectric constant and loss tangent • Piezo d33 meter ➥The piezoelectric charge coefficient

  7. Results and discussion 1. • It’s not necessary to control the atmosphere during the sintering process of these ceramics ➪ the limited evaporation of the raw materials, which is not the case with conventional PZT or PZT- based ceramics. • X-ray diffraction data at room temperature ➪ that all of the samples have a structure of rhombohedral phase. • Figs 1 and 2 show temperature dependences of dielectric constant ε 33T and tan δ of all the samples, respectively. • All samples that show the curie points in Figs. 1 and 2 are shifted to higher temperatures ➪ it can be thought that the additives have influenced the crystal lattices.

  8. Results and discussion 2. • For all BNBT6 samples with additives, the dielectric constant is higher than BNBT6 at room temperature and the ε 33T temperature curves of the compositions exhibit strong dielectric dispersion with the increasing temperature. ➪the diffuse phase transition * BNBT system is a typical relaxation ferroelectric with A-sit complex ions .

  9. Results and discussion 3. • The pure BNBT6 and BNBT6 doped with La3+ or Nb5+➪ a sharp increase of permittivity near about 100℃➪ the tendency of the increase becomes slow and the curve begins to broaden. • "a shoulder" ➪ intermediate phase transition. • the temperature region between the shoulder and Tmax➪ an anti-ferroelectric phase .

  10. Results and discussion 4. • The BNBT6 systems to which Co3+ is added, "the shoulder" almost dis- appeared. • The BNBT6-Co and BNBT6-La-Co system have the similar curves of ε-T and tg δ-T. • The loss tangent is that it almost keeps constant through a wide tempera-ture range from the room temperature to about 250℃

  11. Results and discussion 5. • The SEM micrographs of all compositions' as-sintered surfaces. • The BNBT6-Co system ➪ large grain sizes. • The surface of the grains of Co-doping BNBT6 ➪ a remarkable growth of grains. ( Fig. 3(4) and (6)) • The La 3+doping samples without Co3+➪ the grain size became relatively smaller which was shown in BNBT6-La and BNBT6-La-Nb system. • BNBT6-La -Co system presents a relatively smaller grain size than BNBT6-Co system.

  12. Results and discussion 6. • The comparison of BNBT6 with BNBT6-La gives a similar result➪ the sample with La 3+ doped has a smaller grain size. • The addition of La➪To restrain the grain growth of the ceramics materials • The addition of Co 3+➪ has a converse effect on grain size of the ceramics materials.

  13. Results and discussion 7. • Table 1 summarizes the dielectric and piezoelectric properties of all these modifield BNBT6 compositions. • For all the modified BNBT6 compositions ➪ dielectric constant is greater than that of BNBT6 at room temperature. • Piezoelectric coefficient (d33) of BNBT6-La and BNBT6-La-Nb, in which La 3+ is added, is enhanced and the value of mechanical quality factor Qm decreases.

  14. Results and discussion 8. • The piezoelectric properties of those samples doped with Co 3+ ➪ higher d33 , kt and kp and than other compositions. • BNBT6-Co ➪d33 goes up to 139 pC/N ➪ a maximal value of these samples. ➪ the remarkable growth of grain size after Co3+ -doping ➥ The sound growth of grains makes the development of domains more consummate, and thus the piezoelectricity of the ceramics is improved. • The grain size of BNBT6-Co ceramics decreases after La is added, and d33 becomes smaller as well. But BNBT6 ceramics' dielectric loss drops down to 2.3% after Co-doping. • The Nb5+ doping ➪ the kt/kp ratio of the system became bigger ➪ the anisotropy of the ceramics was enhanced.

  15. Conclusions • The piezoelectric properties and the loss tangent of BNBT6 system can be improved in some extent by Co3+ doping. • The cooperative soft-doping effect of La3+ and Nb5+ could obviously enhance the value of d33 . • The intermediate phase transition of BNBT6 system existing before the Curie temperature almost disappears and grain size shows an evident when Co3+ is doped.

More Related