1 / 20

Protection of Condensers in Power Plants with High Performance Polymeric Compounds

Protection of Condensers in Power Plants with High Performance Polymeric Compounds. Written By: Ricardo Chang. Presented By: Don Hilliard. Essential Parts of a Condenser. Types of Corrosion. Pitting Corrosion Crevice Corrosion. Types of Corrosion.

guang
Download Presentation

Protection of Condensers in Power Plants with High Performance Polymeric Compounds

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Protection of Condensers in Power Plants with High Performance Polymeric Compounds Written By: Ricardo Chang Presented By: Don Hilliard

  2. Essential Parts of a Condenser

  3. Types of Corrosion • Pitting Corrosion Crevice Corrosion

  4. Types of Corrosion • Intergranular Corrosion - Corrosion Fatigue • Galvanic Corrosion

  5. Types of Corrosion • Stress Crack Corrosion • Flow Induced Corrosion • Impingement Corrosion • Entrainment Corrosion • Cavitation

  6. Corrosion is… • “A gradual wearing away or alteration by a chemical or electromechanical oxidizing process”

  7. Ferrous Alloys Corrode • Water • Velocity • Acidity • Motion • Temperature • Bacteria / Salts / Aeration

  8. Basic Corrosion Cell • Anode • Cathode • Conductor between Anode and Cathode • Electrolyte (salt or acid solution)

  9. Galvanic Series • CORRODED END (ANODIC) Magnesium Lead Silver Solder Magnesium Alloys Tin Nickel (passive) Zinc Nickel (active) Inconel (passive) Aluminum 2S Inconel (active) Hastalloy C (passive) Cadmium Hastelloy C (active) Silver Aluminum 17ST Brass Graphite Steel or Iron Copper Titanium Cast Iron Bronzes Zirconium Carbon Steel Copper – nickel alloys Gold Stainless Steel Monel Platinum PROTECTED - END (CATHODIC)

  10. Galvanic Corrosion • The # 1 Problem in Condensers • Also • Pitting • Crevis

  11. Solutions to Prevent Corrosion • Cathodic Protection • Specialty Alloys • Barrier Coatings

  12. Belzona 1321

  13. Belzona 1341

  14. Belzona 1391

  15. Belzona 1591

  16. Belzona 5811

  17. Some Considerations • Surface must be cleaned with an angular abrasive to obtain a near white metal finish with a 3-mil surface profile. • Surface must be dry and free from contaminants. • Often several coats must be applied. • Cure times may be excessive. • Finished surface must be free from pin holes or holidays (detection is required). • Low heat transfer coefficients.

  18. In Conclusion: • Equipment in wet operating conditions will corrode!!!!!

  19. Barrier Coatings can Provide: • Low Cost • Long Lasting Solution To the overall problem of corrosion

More Related