1 / 9

REGRINDING CAMS AND LIFTERS

REGRINDING CAMS AND LIFTERS. I do not recommend using reground cams I do not recommend using reground lifters. ROLLER CAM AND LIFTERS. Roller lifters can accept higher lift rate without wear Roller lifters reduce valve train friction

Download Presentation

REGRINDING CAMS AND LIFTERS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. REGRINDING CAMS AND LIFTERS • I do not recommend using reground cams • I do not recommend using reground lifters

  2. ROLLER CAM AND LIFTERS • Roller lifters can accept higher lift rate without wear • Roller lifters reduce valve train friction • Roller lifters must have a way of keeping them from turning

  3. ROLLER CAM AND LIFTERS • Roller Cams are made of steel (not cast iron) • Roller Cams have more agressive Profiles • Lobes are polished to a fine matte finish • After break-in, the lobe has a mirror finish

  4. CAM DRIVES • The Camshaft is Driven by the Crankshaft • Cam is driven at one half Crank speed • Gear • Chain and Sprockets • Belt and sprockets

  5. CAM DRIVES - GEARS • Cam gear is soft - Fiber or Aluminum • Are press fit to cam - Pre-heat to 200 degrees to install • Crank gear - Steel • Advantages - Less wear and Backlash • Disadvantages - Takes more space and can be noisey

  6. SPROCKETS • Used with chains can be made of • Steel • Iron • Aluminum (Nylon coated teeth) - can stick oil pump relief valve • Do Not use a worn Sprocket with a New Chain

  7. TIMING CHAINS • Roller Chain (bicycle style) • Silent Chain - 2 styles • Small Pin - Stiff • Large Pin - Limp

  8. TIMING BELTS • Cogged Belt Drive • Advantages Lighter, Quieter, Easier to Change • Virtually no streach in service • Watch rib tooth shape - Rounded or Square

  9. TIMING BELTS • Replacement 30,000 to 60,000 miles

More Related