1 / 24

Fly- By- Wireless

Fly- By- Wireless. Final Report & Proposed Project CANEUS 2009 Workshops NASA Ames Research Center 06 March 2009. David Russel Flight Research Laboratory National Research Council Canada. Vision.

gmcarthur
Download Presentation

Fly- By- Wireless

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Fly- By- Wireless Final Report & Proposed Project CANEUS 2009 Workshops NASA Ames Research Center 06 March 2009 David Russel Flight Research Laboratory National Research Council Canada

  2. Vision • To minimize cables and connectors and increase functionality across the aerospace industry by providing reliable, lower cost, modular, and higher performance alternatives to wired data connectivity to benefit the entire vehicle/program life-cycle.

  3. Mission

  4. Objectives/Strategies

  5. Objectives/Strategies Cont.

  6. Identified End-User Needs • Energy savings • Needs to be small • Reduce costs associated with wired systems • ESA Assessment – save 3 weeks AIT for 10+ people if used wireless. - temp, pressure, monitors. • Environmental and internal monitoring applications • Passive wireless thermal, acceleration, and acoustic emission sensors for structural health monitoring and testing

  7. Identified End-User Needs, Cont. • Replace wired sensors on launch systems • TPS – embedded in heat shield to id temp strain so that TPS margins can be reduced • Radiation tolerant • Operate in RF environment compatible with satellites and aerospace vehicles (metallic cavity) • Electromagnetic Compatibility– case by case

  8. Potential Project Applications • Wireless communication and control • Thermal vacuum testing • Clean-room applications • In cabin wireless video streaming • SWARM Nanobots / Satellite Clusters • Wireless internet • Lunar communications between multiple nodes • Delamination of structural elements

  9. Consortium Project Outcomes • 2 Projects Identified • Selected: • Wireless passive acoustic emission sensors for structural and spacecraft health monitoring • Additional: • Self powered wireless method to detect and categorize surface and structural damage in real time caused by high momentum structural impacts

  10. Proposed Project

  11. Proposed ProjectWireless passive acoustic emission sensors for structural and spacecraft health monitoring.

  12. Relevant Needs Addressed • Passive wireless thermal, acceleration, and acoustic emission sensors for structural health monitoring and testing • Distributed sensor networks • Need large quantity of sensors for testing and monitor large structures • Temperature, pressure, acceleration, and strain – low data rate (near term) • Acoustic emission – 1Msps – (longer term)

  13. Consortium Members Involved • St. Cloud State University / University of Minnesota • National Center for Microelectronics (CNM)- Spain • Applied Sensor R&D Corporation • University of Maine • NASA • ESA • Boeing • National Research Council - Canada • Centre for Large Space Structures & Systems – CLS3, Canada

  14. Why this project? • Clearly expressed near term need • Longer term additional applications • If able to address this application, technology can be readily applied to a number of other applications: temperature, pressure, etc. • Clear synergy between consortium technologies • High risk – unique combination of technologies

  15. Technologies Involved #1 - Passive SAW wireless interface devices Applied Sensor R&D Corp • SAW devices are passive (batteryless) devices that can be used to provide a wireless communication interface to external impedance varying sensors. • The SAW devices are Rad-hard to over 10 MRad of ionizing radiation, operate from cryogenic temperatures to over 1,000°C, and remain functional through repeated thermal shock cycles between temperatures that differ by more than 250°C. • These devices, which are based on the low cost device technology widely used in cell phones, will enable cost-effective passive distributed collection of data from a range of existing flight qualified sensors and emerging sensors. • Each SAW device receives a spread spectrum RF signal, which activates the device, modulates the signal with a unique RFID-like code, and sends back a signal containing the sensor ID information along with the measurement from the attached sensor.

  16. Technologies Involved: #2 Carbon nano tube piezo sensor for acoustic detection up to the ultrasonic range St. Cloud State University / University of Minnesota • The technology utilizes a carbon nanotube (CNT) / piezo hybrid sensor that results in thin sheets of acoustic detectors. • The sensor has a high bandwidth and can be utilized as an acoustic sensor up to ultrasound range. In its current stage the sensors are not wireless and they will be an excellent candidate to be integrated with SAW technology to create a passive sheet sensor. • Our group also specializes in modeling, signal processing and control of these devices.

  17. Current Technology Data Acquisition System AE Wired Sensor Data Acquisition System AE Wireless Sensors with SAW tags Wireless Sensing System Current wired system Planned wireless system Single SAW sensor-tag

  18. Enabling Technologies Needed • Antenna • Wideband, small, and low-loss • System level integration • Data Acquisition (DAQ) • Instrumentation • Stand-alone interface • Software – processing and analysis • Commercially available • Customized • Combination

  19. Relevant Stakeholders • Potential Customers • NASA – represented in consortium • ESA – represented in consortium • Boeing – represented in consortium • EADS – consortium network • Potential Integrators • INVOCON – consortium network • An integrator in the EU may be needed to help mitigate risk and encourage ESA adoption • Processing and Analysis - TBD

  20. Risks • Technical • EMC • Regulatory • FCC & ITU compliance application dependant • Industry specific regulations and standards • Export control - ITAR • Funding • IP • division on ownership

  21. Critical Success Factors • Meets customer needs • NASA expressed • ESA expressed • Boeing expressed • Large number of potential applications • Partially - identified supplier/distribution channel • Integrator needed (US and in EU) • Analysis and processing • Potential for Funding/Investment • Government - potential via NRAs, space act agreements, and SADI (Canada) • Industrial - R&D funds • ASR&D – Existing SBIR Phase I – enables Phase III with no competition required for US federal contracting • Proposed project inline with consortium objectives and goals

  22. Next Steps • Identify source of funding • Involve system integrators • Processing and Analysis - TBD • Define Prelim Requirements / Spec • Define Detailed Design Spec • Scheduling, time and cost estimates • Project alignment with relevant roadmaps

  23. Near Term Actionable Items • CANEUS • Funding identification and access • US and Non-US • Enabling technology identification • Resources for project planning • Facilitate international collaboration • Consortium • It depends on CANEUS • Prelim feasibility - limited time and resources • Finalize at the next FBW workshop to be held in June 2009 at Montreal

  24. Questions

More Related