1 / 11

Li-Chuan Chen, Marian Muste, and Larry Weber

53:071 Principles of Hydraulics Laboratory Experiment #1 Energy and Hydraulic Grade Lines in Water Pipe Systems. Li-Chuan Chen, Marian Muste, and Larry Weber. Objective.

glen
Download Presentation

Li-Chuan Chen, Marian Muste, and Larry Weber

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 53:071 Principles of HydraulicsLaboratory Experiment #1Energy and Hydraulic Grade Lines in Water Pipe Systems Li-Chuan Chen, Marian Muste, and Larry Weber

  2. Objective • To determine the energy and hydraulic grade lines in a pipeline assembly comprising losses due to friction in conduit as well as head losses due to transitions and fittings.

  3. Principle • Bernoulli’s equation

  4. Apparatus — Standard Pipe • Geometrical characteristics for the pipeline system can be found in the appendices in the handout.

  5. Apparatus — Streamlined Pipe • Geometrical characteristics for the pipeline system can be found in the appendices in the handout.

  6. What are we going to do? • We are going to measure the piezometric heads along a pipeline system.

  7. Procedures • Bleed the pipe system and tubings. • Establish stabilized maximum discharge in the system. • Measure the datum. • Measure and record the pressure head. • Measure the head on weir. • Measure the water temperature.

  8. Data Sheet

  9. Analysis • Compute velocity, piezometric, and energy heads at each pressure tap. • Plot the energy and hydraulic grade lines. • Discuss the energy budget. • Discuss sources of experimental errors. • Calculate the horsepower consumed by the system.

  10. Result — Standard Pipe

  11. Further Consideration • Compare the measured values between the pressure taps with computed ones using empirical values found in your hydraulics or fluids textbooks. Explain the discrepancies. Note — Losses between Tap 5 and 6 through the curved pipe segment should be treated as a lump local loss located at Tap 5.

More Related