1 / 4

The Study and Modeling of Adsorbed Regenerator Plate Material

The Study and Modeling of Adsorbed Regenerator Plate Material. Kelsey McCusker. Regenerator. Objectives. Successfully model the steady state process of the regenerator to determine the efficiency of the new design and material

gil
Download Presentation

The Study and Modeling of Adsorbed Regenerator Plate Material

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The Study and Modeling of Adsorbed Regenerator Plate Material Kelsey McCusker

  2. Regenerator

  3. Objectives • Successfully model the steady state process of the regenerator to determine the efficiency of the new design and material • Investigate the complicated heat transfer between fluid and material to produce an effective resistance on a per plate basis

  4. Methodology • Develop a 2-D transient MATLAB model to predict the heat transfer flow path through the plate. • Use this specific model to generalize each plate and fold the results into a larger transient model following the fluid and regenerator temperature nodes through each blow process over time.

More Related