Some of the Common Window Materials for Your Home

1. Some of the Common Window Materials for Your Home

2. Choosing the right window material for your room is a difficult decision to make, whether you’re replacing existing windows or starting from scratch. It’s critical to consider what each window type has to offer in terms of function, aesthetics, features, and cost savings. 

3. With improved technology, window manufacturers are continually enhancing the quality of their products. It’s essential to speak with a professional windows supply Norcross who has the experience and understanding to advise you on the different types of windows and which ones are best for you.

4. Factors To Watch Out: Most windows have a rating sticker on them that indicates how well they perform in at least some of the following areas:

5. R-Value The R-value of a window is a measurement of how well it prevents heat transmission or how well it keeps uncomfortable temperatures outside and pleasant ones inside. The R-value should be as high as possible.

6. U-Value The U-value (or U-factor) is the inverse of the R-value and quantifies the heat transfer propensity. As a result, a lower U-value is preferable.

7. Solar-Gain When the sun is shining, solar gain (also known as solar heat gain coefficient, or SHGC) reveals how much a window will heat a room. Solar gain is beneficial when the weather is chilly, but it can significantly increase air-conditioning costs during the summer. The greater the number, the more heat is gained.

8. Wind Resistance Air leakage, often known as wind resistance, is measured in cubic feet per minute (cfm). There should be two numbers: one for 70 degrees Fahrenheit and another for 0 degrees Fahrenheit. The better the seal, the smaller the numbers.

9. Types of Windows: Vinyl Windows This is usually the cheapest option and is ideal for a wide range of applications. The weatherstripping (which is often fuzzy) on lower-quality models is not sturdy, and some of the plastic elements may break, particularly when the window is tilted out for cleaning. 

10. Changes in temperature cause vinyl to contract and expand, reducing its capacity to seal. When exposed to extremely hot sunlight, it can also warp. Vinyl can be painted (using an alcohol-based primer first helps), but the paint will peel after a few years and will need to be redone.

11. Wood Windows Wood is more expensive than vinyl, and it needs to be treated with paint or finish on a regular basis to prevent rotting and sun damage. Wood, on the other hand, has inherent insulating capabilities and is preferred by most people because of its appearance.  Some are made of stain-quality wood, but windows with visible joints will not look good stained; instead, prepare to paint.

12. Clad Windows Many manufacturers cover the external portions of wood windows with aluminum, vinyl, or fiberglass to make them more robust. Aluminum cladding can be painted if a primer is applied first. Tinted vinyl and fiberglass can usually be painted without issue, although white vinyl may have difficulties adhering to paint. Windows with hard-baked paint treatments are also available.

13. With improved technology, window manufacturers are continually enhancing the quality of their products. It’s essential to speak with a professional windows supply Norcross who has the experience and understanding to advise you on the different types of windows and which ones are best for you.

14. Double-Hung Windows Because of its versatility and ease of use, the double-hung window is the most prevalent. It contains a variety of specialized components. Water can run from a slightly slanted external sill. The inner stool (also known as the inside sill) is usually only large enough for a tiny plant; if it were any bigger, it would be bumped against by people. Stop moldings and separating stops must be perfectly matched to seal the window while allowing the sashes to freely travel up and down.  Newer wood windows employ friction or springs to keep the sashes in place when they are raised, rather than the weight-and-pulley arrangement.

15. Wrapping Up: Because of its versatility and ease of use, the double-hung window is the most prevalent. It contains a variety of specialized components. Water can run from a slightly slanted external sill. The inner stool (also known as the inside sill) is usually only large enough for a tiny plant; if it were any bigger, it would be bumped against by people.  Stop moldings and separating stops must be perfectly matched to seal the window while allowing the sashes to freely travel up and down. Newer wood windows employ friction or springs to keep the sashes in place when they are raised, rather than the weight-and-pulley arrangement depicted above. Contact professional windows supply, Norcross, for better choices.

16. Name: Georgia Window Fashions Website: https://georgiashutters.com/ Phone: 1-888-465-9467 Local Office: 770-447-0330 Fax: 770-217-4570 Email: info@georgiashutters.com Address: Georgia Window Fashions, 2909 Langford Rd Suite A-200 Norcross, GA 30071 Founded: 1996