1 / 17

Title

Title. Water Saturation from Porosity Logs Alone, Compared with Standard Resistivity Interpretation Gas/Water Systems. Digital Formation, Inc. November 2003. Contents. Benefits Outline Modeling Examples Conclusions. Benefits – Seismic.

Download Presentation

Title

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Title Water Saturation from Porosity Logs Alone, Compared with Standard Resistivity Interpretation Gas/Water Systems Digital Formation, Inc. November 2003

  2. Contents • Benefits • Outline • Modeling • Examples • Conclusions

  3. Benefits – Seismic • Quantifies influence of wellbore environment on log responses, and implication in seismic attributes. • Potential application to evaluating reservoir-scale resistivity properties by linking petrophysical measurements with seismic records.

  4. Benefits – Petrophysics • Saturation from porosity logs alone – no resistivity interpretation involved. • From pseudo resistivity curves, can verify ‘m’, ‘n’, Rw. • Ability to distinguish fresh water from hydrocarbons. • Defines influence of invasion on porosity log response. • By integrating pseudo resistivity with actual resistivity curves, the invasion profile can be examined. • Pseudo resistivity curves give better bed definition, particularly as compared to induction log measurements.

  5. Benefits – Engineering • Quantify the degree of invasion and wellbore damage. • Estimate of permeability variation to the invading mud filtrate.

  6. Outline • In hydrocarbon/water systems, total porosity minimizing matrix and fluid effects is available from a density/neutron combination. • Using our Fluid Substitution Modeling techniques, pseudo acoustic, density and neutron logs can be constructed for any assumed fluid combination. To date, we have concentrated on gas/water systems. • By comparing actual log response with the pseudo logs it is possible to calculate, at each depth level, the water saturation as “seen” by each of the individual porosity logs.

  7. Modeling • For each porosity log, pseudo logs are created: • Assuming “wet”, SW=1.0 • Using “remote” Sg • Assuming a uniform Sg of 80% • Actual porosity log response is compared with the pseudo logs – if the modeling has been performed correctly, the pseudo log should fall between “wet” and “remote”. • The position of the actual curve between “wet” and “remote” is a direct measurement of SW as seen by each porosity log. For the density, SW is a linear relation with respect to position. For both acoustic and neutron, the response is markedly non-linear. • From the values of SW, as derived from porosity logs, theoretical resistivity curves, one each for all porosity logs available, are created using any desired values for ‘m’, ‘n’ and RW. • Pseudo resistivity curves are compared with actual resistivity, and can be examined for consistency.

  8. Examples • Fast Rocks • SW from Porosity Logs – pro forma • Fast Rocks • Gassmann DTP & DTS • SW from Porosity Logs • Carbonates • Gassmann DTP & DTS • SW from Porosity Logs On all plots, porosity increases from right to left, 0-40%.

  9. Fast Rocks – SW from Porosity Logs – pro forma Invasion profile from porosity log analysis Pseudo resistivity logs from porosity logs, assuming m=n=2, and Rw=0.1 (input to regular resistivity analysis)

  10. Fast Rocks – Gassmann DTP/DTS Density and Neutron do not “see” gas Density and Neutron both “see” gas Acoustic affected by gas in wellbore (anomalously high Dt)

  11. Fast Rocks – Gassmann DTP/DTS Density irregularly “sees” gas Neutron routinely“see” gas

  12. Fast Rocks –SW from Porosity Logs Acoustic response dominated by gas in wellbore

  13. Fast Rocks –SW from Porosity Logs Pseudo resistivity gives better bed recognition than original induction log Variable degree of invasion from all three porosity logs

  14. Carbonates – Gassmann DTP/DTS Density and Neutron logs“see” gas Density and Neutron logs “see” liquidonly

  15. Carbonates – SW from Porosity Logs Density andNeutron logs“see” gas. Acoustic “sees” residual gas Reconstructed pseudo resistivitiesaids in invasionprofile interpretation Estimate of wet resistivity from porosity logs

  16. Conclusions – Part I • Sw as “seen” by each porosity log is available with no requirement for resistivity logs or knowledge of RW, ‘m’, or ‘n’. • By comparing with regular log-calculated SW, saturation changes as defined from porosity logs, and as they change with depth, are available. • Comparison with invasion as shown by resistivity logs will show if log interpretation is consistent among all logs.

  17. Conclusions – Part II • The technique is particularly appropriate in reservoirs with variable RW, to solve the problem of fresh water. • From these calculations of SW, a series of theoretical resistivity curves can be generated, which can be compared with original resistivity logs. • Theoretical resistivity curves help in verifying ‘m’, ‘n’ and RW, and also frequently give better bed definition than resistivity measurements.

More Related