1 / 13

Extreme Ultraviolet Polarimetry with Laser-Generated High-Order Harmonics

Extreme Ultraviolet Polarimetry with Laser-Generated High-Order Harmonics. N. BRIMHALL, N. HEILMANN, N. HERRICK, D. D. ALLRED, R. S. TURLEY, M. WARE, J. PEATROSS Brigham Young University, Provo, UT 84602. Overview and Conclusions.

Download Presentation

Extreme Ultraviolet Polarimetry with Laser-Generated High-Order Harmonics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Extreme Ultraviolet Polarimetry with Laser-Generated High-Order Harmonics N. BRIMHALL, N. HEILMANN, N. HERRICK, D. D. ALLRED, R. S. TURLEY, M. WARE, J. PEATROSS Brigham Young University, Provo, UT 84602

  2. Overview and Conclusions • We have constructed an extreme ultraviolet (EUV) polarimeter that employs laser-generated high-order harmonics as the light source. • This instrument represents a potential ‘in-house’ instrument at facilities developing EUV thin films (as opposed to synchrotron). • We have compared reflectance data with that taken at the Advanced Light Source (ALS) and with calculated data. These measurements agree well. • In addition to absolute reflectance, we can extract all desired information out of relative measurements of p- and s-polarized reflectance, reducing systematic errors.

  3. Two examples IMAGE satellite 2000 (above) ThO2 optical constants (right) Optical constants in the EUV are typically unknown, incomplete, or inaccurate. This is important for those designing EUV optics for applications such as astronomy, lithography, or microscopy. Introduction: Extreme Ultraviolet Optics and Optical Constants

  4. EUV light sample incident angle (Θ) Optical Constants • Optical constants are typically determined by measuring reflectance as a function of angle. • Reflectance is then fitted to the Fresnel equations to find the optical constants.

  5. Sources of EUV light • Synchrotron source • High flux • Wide, continuous wavelength range • Not local, expensive to run, large footprint • ‘Fixed’ polarization • Plasma source • Low flux • Wide wavelength range only a few wavelengths in the range • Local • Unpolarized • High Harmonics • Fairly high flux • Wide wavelength range, good spacing of wavelengths throughout the range. • Local • Easily rotatable linear polarization

  6. EUV Generation EUV Grating 800 nm, 35 fs, 10 mJ Laser Pulses EUV Light MCP Detector Gas (He, Ne, Ar) High Harmonic Generation • Fairly high flux (6x108 photons/sec at a spectral resolution of 180) • Wide wavelength range with good spacing of wavelengths within the range (8-62 nm) • Easily rotatable linear polarization • Small footprint, low cost of operation • Potential ‘in-house’ instrument at facilities developing EUV thin films λ = 800 nm / q Orders 37 to 77 Wavelengths of 10 nm-22 nm

  7. Instrument Overview • Easily rotatable linear polarization • Ability to measure reflectance of multiple wavelengths simultaneously • Extensive scanning ability

  8. Reflectance Measurements

  9. Ratio Method • Noise (especially systematic noise) is a problem for retrieving accurate optical constants • A measurement of p- to s-polarized reflectance reduces systematic noise significantly

  10. Can we extract the same information? Yes!

  11. Future Work • One step away from an ellipsometer. • Can we measure phase information? • This is difficult in the EUV because there are no good polarizers Diffraction pattern depends on the phase difference between the reflection from the two materials “Unknown” material “Known” material

  12. Conclusions • We have constructed a new instrument that uses high-order harmonics to measure optical properties of materials in the EUV. • Our compact source has a wide wavelength range, high flux, and easily rotatable linear polarization. • We have compared reflectance measurements with those taken at the ALS and computed data. These measurements agree. • We can reduce systematic noise by measuring the ratio of p-polarized to s-polarized reflectance, and we can extract the same information from this as from absolute reflectance.

  13. Acknowledgements We would like to recognize NSF grant PHY-0457316 and Brigham Young University for supporting this project.

More Related