1 / 22

MALVINO

SIXTH EDITION. MALVINO. Electronic. PRINCIPLES. Frequency Effects. Chapter 16. The midband. The cutoff frequencies. The frequency response curve of an ac amplifier. A. A mid. 0.707 A mid. f. f 1. 10f 1. f 2. 0.1f 2. The gain is maximum in the midband.

galia
Download Presentation

MALVINO

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SIXTH EDITION MALVINO Electronic PRINCIPLES

  2. Frequency Effects Chapter 16

  3. The midband The cutoff frequencies The frequency response curve of an ac amplifier A Amid 0.707 Amid f f1 10f1 f2 0.1f2 The gain is maximum in the midband. Also called the half-power frequencies

  4. Review of logarithms • A logarithm is an exponent • If x = 10y, then y = log10x • y = log 10 = 1 • y = log 100 = 2 • y = log 1000 = 3 • y = log 0.1 = -1 • y = log 0.01 = -2 • y = log 0.001 = -3

  5. Definition of GdB • G = pout/pin • GdB = 10 log G • Memorize: • if G = 2, GdB = +3 • if G = 0.5, GdB = -3 • if G = 10, GdB = +10 • if G = 0.1, GdB = -10

  6. Definition of AdB • A = vout/vin • Adb = 20 log A • Memorize: • if A = 2, AdB = +6 • if A = 0.5, AdB = -6 • if A = 10, AdB = +20 • if A = 0.1, AdB = -20 • Cascade: A = A1A2, AdB = A1dB + A2dB

  7. More on the decibel • GdB = AdB only if impedance matched • G = antilog GdB/10 • A = antilog AdB/20 • PdBm = 10 log P/1 mW • P = antilog PdBm/10 • VdBV = 20 log V • V = antilog VdBV/20

  8. 0 1 2 3 4 5 6 7 8 9 10 Linear scale 1 2 3 4 5 6 7 8 9 10 Logarithmic scale A logarithmic scale compresses large values and allows a large range to be covered without losing resolution for the smaller values.

  9. Bode plots • Use semilogarithmic graph paper (the horizontal axis is logarithmic; the vertical is linear) • Plot dB voltage gain on the vertical axis • Plot frequency on the horizontal axis • An octave refers to a ratio of 2 • A decade refers to a ratio of 10

  10. Unity gain frequency Unity gain frequency Ideal Bode plot of an ac amplifier Cutoff (-3dB) frequencies* 50 dB Midband gain 40 dB 30 dB 20 dB/decade rolloff 20 dB 10 dB 0 dB 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz *also called corner or break frequencies

  11. R 1 1 f2 = A = 2pRC ( ) 2 f 1+ f2 C Amplitude response of RC lag circuit f2 10f2 100f2 1000f2 0 dB -20 dB -40 dB -60 dB

  12. f f2 R Angular response of RC lag circuit C f = -arctan 0.1f2 f2 10f2 0o -45o -90o

  13. Ideal Bode plot of a dc amplifier with two break frequencies. 50 dB 40 dB 20 dB/decade 30 dB 20 dB 40 dB/decade 10 dB 0 dB 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz fb1 fb2

  14. A+1 Cout = C A C Inverting amplifier A vout vin Inverting amplifier with feedback capacitor Inverting amplifier A vout vin Cin Cout Miller equivalent circuit Cin = C(A+1)

  15. Frequency compensation • Most op amps are internally compensated to prevent oscillations • One dominant internal compensation capacitor rolls off the gain at 20 dB/decade • IC capacitors are limited to the pF range • The Miller effect makes the internal compensation capacitor equivalent to a much larger capacitor

  16. V 0 0.35 fcutoff = TR TR Square-wave response of a circuit with limited bandwidth R C V 0.9V TR = 2.2RC 0.1V 0

  17. 1 2p(RG + zin(stage))C zin(stage) = R1 R2 bre’ f1 = Cutoff frequency of input coupling capacitor +VCC A f RC f1 R1 RG RL C vG RE R2

  18. Cutoff frequency of output coupling capacitor +VCC A 1 f f1 = RC f1 2p(RC + RL)C R1 RG C RL vG RE R2

  19. 1 re’+ f1 = 2p zoutC ) ( zout = RE R1 R2 RG b Cutoff frequency of emitter bypass capacitor +VCC A f RC f1 R1 RG RL vG RE R2 C

  20. Combined frequency effects • The input coupling, output coupling, and emitter bypass capacitors each produce a cutoff frequency. • One is usually dominant (the highest frequency) and produces a rolloff of 20 dB/decade as frequency decreases. • When the next cutoff is reached, the gain rolloff increases to 40 dB/decade. • When the third is reached, it becomes 60 dB/decade.

  21. Base and collector bypass circuits C’c A f f2 C’e Cstray CMiller CMiller C’e

  22. Bypass circuits • The base bypass circuit contains the internal base-emitter capacitance (C’e) and the Miller capacitance due to the internal collector-base feedback capacitance (C’c) • The collector bypass circuit contains the Miller capacitance and the stray (wiring) capacitance.

More Related