1 / 67

CS 598 HL: Advanced Topics on Wireless Networks

CS 598 HL: Advanced Topics on Wireless Networks. Aug 25, 2006. Today. Wireless communications basics Modulation, channel capacity Bandwidth acquisition and management, access technologies Challenges to wireless communications Channel coding. Communication Basics.

gali
Download Presentation

CS 598 HL: Advanced Topics on Wireless Networks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CS 598 HL: Advanced Topics on Wireless Networks Aug 25, 2006 Overview

  2. Today • Wireless communications basics • Modulation, channel capacity • Bandwidth acquisition and management, access technologies • Challenges to wireless communications • Channel coding Overview

  3. Communication Basics • PHY layer in ISO protocol stack • Physical media characteristics • Modulation • Channel coding symbols Channel Coding information Source Coding bits: 01010100 Modulation Transmitter analog Sender physical media analog Receiver De-modulation Receiver bits: 01010100 decoding Overview

  4. Modulation • We want to transmit bits (0 and 1) • Physical media transmit analog signals, NOT bits • Telephone line, cable • Ethernet, serial and parallel cable • Fiber • Free space • Ride digital information (0 and 1 bits) on analog signals • Modulation and demodulation Overview

  5. Three Types of Modulation • Amplitude modulation • Frequency modulation • Phase modulation Overview

  6. Amplitude Modulation 0 0 1 1 0 1 0 Overview

  7. Frequency Modulation • Frequency changes slightly Overview

  8. AM-FM Comparisons • Amplitude modulation (AM) • More susceptible to noise that affects the instantaneous strength/amplitude of signal • Used in AM radio broadcast • Digital version: ASK (amplitude shift keying) • Frequency modulation (FM) • Used in FM radio broadcast, AMPS Cellular (analog) • For AMPS analog speech, frequency changes continuously up to ±12 KHz • Digital version: FSK (frequency shift keying) Overview

  9. QPSK Bit value Phase Shift 00 None 01 1/4 10 1/2 11 3/4 QPSK 00 00 10 10 00 00 00 Phase Shift Keying Binary PSK Bit Value Phase Shift 0 None 1 1/2 3/4 phase shift BPSK 0 0 1 1 0 0 0 Overview

  10. Comparisons • Phase modulation (PM) • Can be used for analog signal with continuously varying phase • Digital version: PSK. • PSK – many variations • BPSK • Use alternative waveforms to encode 0 and 1, 1 bit per symbol • GSM uses a form of BPSK called Gaussian Minimum Shift Keying (GMSK) • 802.11 at 1Mbps uses BPSK • QPSK • Multi-level modulation, phases represent 00, 01, 10, or 11 • 2 bits per symbol • Used in IS-95 CDMA • 802.11b at 2, 5.5, and 11Mbps uses QPSK • DQPSK: Differential QPSK • Phase changes represent 00, 01, 10, or 11 • Used in IS-54 and IS-136, North American digital TDMA Overview

  11. Bit Rate • Symbol rate: • Signal parameter change speed • Number of bits per symbol: • Modulation, multi-level modulation • Bit Rate: • symbol rate * number of bits per symbol • Measured in bps (bits per second) • What limit bit rate? • Constraint on symbol rate • Constraint on number of bits per symbol Overview

  12. bandwidth modulated time frequency flow fhigh f Constraints on Symbol Rate • Modulated signal occupies certain frequency band • Bandwidth is approximately symbol rate • High symbol rate => high bandwidth signal carrier single frequency f frequency Overview

  13. Constraints on Symbol Rate • Physical media (channel) has certain bandwidth B • Frequency components beyond physical media’s bandwidth will be removed –-- inter-symbol interferences at receiver • Constraint on the speed we change the carrier signal parameters (amplitude, frequency, and/or phase) received un-modulated signal sender’s symbol rate Overview

  14. Constraint on Number of Bits per Symbol • Signal distortion due to noise and interference • Cause de-modulation error • Signal power to noise/interference power: S/N Overview

  15. Bit Rate • C = B*log2(1+S/N) b/s • B is limited by physical media bandwidth • S/N is limited by transmission power, lost, interferences, and noises. • Towards high bit-rate C: • Use high-bandwidth wire: B • Acquire more wireless bandwidth: B • Increase received signal strength: S • Decrease interferences and noise: N Overview

  16. Wired: Telephone and DSL • Use the same physical media • Work at different frequency bands, with different bandwidth upstream data voice downstream data 0~4 KHz 240K ~ 1.5M Hz 25~160K Hz B = 247 * 4K Hz B = 135 KHz 640 Kbps upstream, 8 Mbps downstream 64~640 Kbps upstream, 1.5 Mbps downstream in practice Overview

  17. Wired: Cable • Physical medium: coaxial cable 0 MHz 6 MHz / channel 1000 MHz 850 MHz + Downstream B = 6 MHz 5~65 MHz Upstream B = 2 MHz • Use QAM modulation in one channel • 30~40 Mbps, shared by up to 1000 users Overview

  18. Wireless Frequency Band • A single common physical medium: free space • Authoritative management is necessary to avoid interferences (decrease N) • FCC: Federal Communications Commission infra-red fiber optics Overview

  19. Radio Frequency Spectrum • Cellular and PCS • ISM unlicensed: Bluetooth, 802.11 Overview

  20. Cellular and PCS Spectrum Cellular PCS • 1974, FCC allocated 40MHz for cellular. 10MHz was added later • 1994, FCC allocated • 30 MHz of unlicensed PCS spectrum • 20 MHz for data (1910-1920, 2390-2400MHz), e.g., WLANs • 10 MHz for voice (1920-1930 MHz), e.g., W-PBXs • 120 MHz of licensed PCS spectrum • 6 licenses been auctioned (A-F) • A company may accumulate up to 40 MHz within an area (MTA, BTA) Overview

  21. Acquire PCS License • How FCC awarded PCS licenses? • Auctions! • FCC has completed 3 broadband-PCS license auctions: • A and B frequency blocks (99 MTA licneses) were auctioned for more than $7B, 1995 March • C block auction (492 BTA 30 MHz license), raised $10.22B in May, 1996 • D, E, and F blocks (10MHz licenses in each of 492 BTAs) raised over $2.5B in January, 1997 Overview

  22. After Bandwidth Acquisition • Make the best use of the expensive wireless bandwidth - Wireless resource management • Space-domain: cellular concept • Multiple access technologies • Frequency • Time • Code Overview

  23. Cellular Concept – Before Cellular • All 420 channels are used over entire metropolitan area • Only a max of 420 calls can be supported simultaneously • Power came down from mountain • Large area, low capacity • NY city in 1976 • 543 customers • 3700 on waiting list Overview

  24. Cellular Concept • One base station in a cell • Assign channels into cells • Guarantee min reuse distance D: the distance between a base station and the nearest base station using the same channels • Reuse factor: • N >= 1/3 (D/R)2 • Based on required S/N • Resource management for FDMA and TDMA Overview

  25. Access Technologies • Key multiple access techniques • FDMA: frequency division multiple access • Each user is assigned an individual frequency channel (carrier) • TDMA: time division multiple access • Multiple users are each assigned different time slots on a common frequency channel • CDMA: code division multiple access • Multiple users spread their energy over a common wide frequency band • Spread spectrum technology Overview

  26. FDMA • AMPS contains 832 carriers, bw 30 KHz each • Each user is assigned 2 carriers, one uplink one downlink frequency carrier time Overview

  27. TDMA • Different users are assigned different time slots in a frame frequency time frame time slot Overview

  28. TDMA • A physical channel is a time slot within one carrier • Used in IS-54 and IS-136 (North America TDMA) • Use the same 30 KHz carrier as in AMPS – backward compatible • Increase the number of channels by a factor of 6 – 6 time slots in a frame frequency carrier time frame time slot Overview

  29. Code Division Multiple Access • Multiple users (calls) share the same frequency band (v.s. FDMA) at the same time (v.s. TDMA) • Each user (call) is assigned a unique code sequence. Code sequences of different users are orthogonal. Overview

  30. CDMA w/ Direct Sequence Spread Spectrum • Occupies bw ~ N times the bw of the original signal • 1/T : chip rate (c/s) signal PN code sequence transmitted code-modulated signal Overview

  31. CDMA DSSS Demodulation received signal receiver’s PN code sequence Correlator: accumulate or integrate: Summing N chips during one “bit time” to increase confidence. 24T 48T Overview

  32. Inter-user Interferences Sender 1 • Sender 1’s PN code sequence (N=4): • PN1 = [1, -1, 1, -1] • Sender 2’s PN code sequence (N=4): • PN2 = [1, 1, -1, -1] • PN1 and PN2 are orthogonal: • PN1 · PN2 = +1 -1 -1 +1 = 0 • PN1 · PN1 = PN2 · PN2 = N = 4 • Sender 1 transmits a 3-bit string: S1 = 101, to receiver 1 • Transmitted signal: (PN1)(-PN1)(PN1) = 1,-1,1,-1,-1,1,-1,1,1,-1,1,-1 • Sender 2 transmits a 3-bit string: S2 = 011, to receiver 2 • Transmitted signal: (-PN2)(PN2)(PN2) = -1,-1,1,1,1,1,-1,-1,1,1,-1,-1 • Combined transmitted signal: • (PN1-PN2)(-PN1+PN2)(PN1+PN2) = 0,-2,2,0,0,2,-2,0,2,0,0,-2 • Receiver receives (PN1-PN2)(-PN1+PN2)(PN1+PN2) • Apply PN1 • PN1 · (PN1-PN2)(-PN1+PN2)(PN1+PN2) = (PN1 · PN1)(-PN1 · PN1)(PN1 · PN1) = 4,-4,4 101 = S1 • Apply PN2 • PN2 · (PN1-PN2)(-PN1+PN2)(PN1+PN2) = -4,4,4 011 = S2 Sender 2 Overview

  33. Walsh Hadamard Matrix • Generate orthogonal PN code sequences • W1 = [0]; W2 = [0, 0; 0, 1] • WL = [WL/2, WL/2; WL/2, W’L/2] • W4 = [ 0 0 0 0; 0 1 0 1; 0 0 1 1; 0 1 1 0 ] • All rows are mutually orthogonal • W64 used in CDMA forward link Overview

  34. CDMA Two Stage Modulation occupy BW N times that of the symbol rate PN code sequence • Multiple users communicate Overview

  35. CDMA Analogy Overview

  36. CDMA • 12 ~ 24 calls per sector per 1.25 MHz in IS-95 North America CDMA systems (cdmaOne) • Good speech quality in the presence of all co-channel interferences • Efficient frequency reuse: key to CDMA’s capacity • Inefficient if there were only one cell • Re-use EVERY frequency in EVERY sector and cell of a system provides great capacity gains! Overview

  37. W-CDMA • A U.S. CDMA PCS standard • Allow use of the maximum bandwidth spreading feasible with service provider’s spectrum. Can operate with bandwidth of • 5 MHz, or • 10 MHz, or • 15 MHz • Different from ITU’s 3G “W-CDMA” Overview

  38. Access Technology Summary • Share the allocated bandwidth B in • Frequency domain • Spatial domain • Time domain • Spatial domain sharing • Divide service area into cells • Frequency domain sharing: • Divide allocated bandwidth into frequency bands • Time domain sharing • Divide each frequency band into frames of time slots Overview

  39. “Channel” Definition • FDMA: • Certain frequency band [flow, fhigh] in one cell • Defined in frequency and spatial domain • TDMA: • Certain time slot in one frequency band in one cell • Defined in time, frequency, and spatial domains • CDMA: • Certain PN code in one (wide) frequency band • Real systems use combinations of the above Overview

  40. 2G Cellular and PCS Overview

  41. Challenges to Wireless Communications • Attenuation due to distance • Slow fading due to random environmental effects • Fast fading due to mobility and multi-path propagation • Inter-symbol interferences due to multi-path propagation Overview

  42. Attenuation • d: distance between transmitter and receiver • Free space model:  = 2 (inverse proportional to the area of propagation sphere) • Metropolitan area:  = 4 Overview

  43. Slow Fading • Environmental obstacles (shadow fading) • further decrease Preceive • Preceive rises and falls with significant changes • Over 10’s of meters • Even with constant distance from the transmitter • 3 ~ 8 dB degradation (Preceive/Ptransmit = 0.5 ~ 0.16) slow fading Overview

  44. Fast Fading • One signal travels /2 (3/2, 5/2, 7/2 etc.) farther than another signal will tend to cancel (subtract) • One signal travels  (2, 3, etc.) farther than another signal will tend to strengthen (add) Overview

  45. Fast Fading • “Fades” (subtractions) can attenuate up to 30 dB (1/1000th power) • “Adds” can be up to 10dB (10x power) • Fades come and go about every 6 inches! • Walking: 3 ft/sec • Driving: 88 ft/sec = 60 mph Overview

  46. Fast Fading • Modeled with Rayleigh statistics (Rayleigh fading): • When all signals have the same strength fast fading slow fading /2 Overview

  47. Inter-symbol Interferences • For TV: delayed version of last frame creates “Ghosts” or “echoes” Overview

  48. Challenges of Wireless Communications • Space-domain dynamics: • Attenuation: • Cellular network layout • Repeater, equalizer • Smart antenna (directional) • Slow fading • Power control • Fast fading • Time-domain dynamics: • Inter-symbol interferences Overview

  49. Dealing Multi-path Distortion • Diversity • CDMA RAKE receiver • Multiple antennas • OFDM: orthogonal frequency division multiplexing Overview

  50. CDMA RAKE Receivers • Multiple correlators synchronized to different propagation paths • Multi-path diversity combining Overview

More Related