1 / 1

10 Things You Should Avoid While Working With Network Cables

Networking cables are networking hardware used to connect one network device to other network devices or to connect two or more computers to share printers, scanners etc. Here are 10 Things You Should Avoid while working with Network Cables. https://fruitycables.tech.blog/2020/03/09/10-things-you-should-avoid-while-working-with-network-cables/

fruitycables
Download Presentation

10 Things You Should Avoid While Working With Network Cables

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 10 Things You Should Avoid While Working With Network Cables Understanding the most common mistakes in network cabling can be key to formulating future-proof requirements. Here are some steps that you should avoid while working with networking cables NOT PREPARING FOR THE FUTURE In case you have some cabling in your place for your desktop and if you need to switch your business to a new location and require new cabling, then you need to decide what type of cable you require to install. 1 USING DIFFERENT CABLING FOR VOICE & DATA 2 Some of you might be using the same cables for data and voice. If so, then you must put a check on yourself. IGNORING CABLING MANAGEMENT RESOURCES Cabling management resources are getting expensive now, but it can also save you a lot of time and money in the long run. Also, cable management prevents hanging cables, which can stretch and cause physical stress on the core of the cable. 3 NOT TESTING THE INFRASTRUCTURE OF THE CABLING When you are done with installing the cables, all you need to check, if the cable is working properly or not. 4 SHORT-SIGHTED PLANNING 5 It goes without saying that your network infrastructure needs to work today – not tomorrow, not five years from now. However, a company’s network infrastructure needs to support the company’s strategy and business processes in the long run. NO CABLE MANAGEMENT 6 Cable management is one of those activities that routinely gets ignored, postponed or done half-heartedly, until there is simply no way to ignore the consequences anymore. LEAVING UNUSED CABLES AROUND It’s very tempting to leave patch cables connected, even though there is no longer any device at the other end. The reasons often sound suspiciously like excuses for being lazy: a user is going to plug something in eventually anyway, connectors only hold for so many connects and reconnects and so on. 7 IGNORING INSTALLATION REQUIREMENTS Depending on equipment type and speed, cable type and installation environment, a number of installation requirements need to be observed. The most often-quoted ones are distance and routing requirements like protective sheathing. 8 For More Information, visit: www.fruitycables.co.uk

More Related