1 / 16

Design and Implementation of VLSI Systems (EN0160) Lecture 16: Scaling Theory

Design and Implementation of VLSI Systems (EN0160) Lecture 16: Scaling Theory . Prof. Sherief Reda Division of Engineering, Brown University Spring 2007. [sources: Weste/Addison Wesley – Rabaey/Pearson]. IBM Cell. 234M transistors in die size of 221 mm 2. Moore’s Law.

freeman
Download Presentation

Design and Implementation of VLSI Systems (EN0160) Lecture 16: Scaling Theory

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Design and Implementation of VLSI Systems (EN0160) Lecture 16: Scaling Theory Prof. Sherief Reda Division of Engineering, Brown University Spring 2007 [sources: Weste/Addison Wesley – Rabaey/Pearson]

  2. IBM Cell 234M transistors in die size of 221 mm2 Moore’s Law Moore’s Law. The number of transistors in an integrated circuit doubles every 2 years.

  3. Scaling of MOS transistors 1.2nm minimum feature size (gate length) Current oxide thickness ~ 1.0 – 2.0nm thickness  3 – 4 atomic layers of oxide Power supply voltage scaling

  4. Scaling of lithographic wavelength Scaling Avg transistor priceis 0.1 μcent! Fewer and fewer companies can afford to have their own foundries Number of transistors shipped

  5. Worldwide semiconductor revenues • Box office: worldwide ~$23B US ($9B); tickets + dvds + tv rights: ~ $44B • Worldwide total software sales $383B • Worldwide pharmaceutical sales: $550B

  6. Device scaling (very idealistic NMOS transistor) (scaled down by L) scale doping increased by a factor of S Increasing the channel doping density decreases the depletion width  improves isolation between source and drain during OFF status  permits distance between the source and drain regions to be scaled

  7. Implications of ideal device scaling

  8. Total power was increasing (mostly because of 2 frequency + die) until we hit a “wall” • Intel VP Patrick Gelsinger (ISSCC 2001) • “If scaling continues at present pace, by 2005, high speed processors would have power density of nuclear reactor, by 2010, a rocket nozzle, and by 2015, surface of sun.”

  9. Scaling of standby (leakage) power bottleneck Standby power • Even if Vt is kept constant after scaling, Poff scales up by S if tox is scaled down by S • Vt must be scaled down if VDD is scaled down (otherwise ISAT is weaker and transistor is slow) • Standby power would further increase by 10 for every 0.1V reduction of Vt

  10. higher active power increasing performance higher leakage Power/performance tradeoffs Power supply voltage (Vdd) Threshold voltage (Vt) [Taur, 01]

  11. Interconnect scaling w: width of interconnect (layer dependant) s: spacing between interconnects with same layer h: dielectric thickness (spacing between interconnects in two vertically adjacent layers) l: length of interconnect t: thickness of interconnect

  12. Constant thickness scaling versus reduced thickness scaling constant thickness scaling reduced thickness scaling

  13. Implications of ideal interconnect scaling

  14. Interconnect delay is dominating gate delay bottleneck Repeaters can help but…

  15. With scaling the reachable radius of a buffer decreases  we need more and more buffers bottleneck repeaters required to buffer Itanium global interconnects • A corner-to-corner (BL-UR) wire in Itanium (180nm) requires 6 repeaters to span die • Repeaters consume chip area; consume power; add vias

  16. We are done with the main (and most of the) material from Chapter 4 (will not discuss reliability) Summary

More Related