1 / 13

Coating Inspector Level 2 NACE-CIP2-001 Free Dumps Online V8.02 | DumpsBase

DumpsBase NACE-CIP2-001 dumps questions are the proper learning materials, which contain complete valid exam questions and answers that help the candidates to prepare well for the NACE-CIP2-001 exam and appear in the NACE-CIP2-001 Coating Inspector Level 2 exam confidently. You can read Coating Inspector Level 2 NACE-CIP2-001 Free Dumps Online V8.02 from DumpsBase here to check the high-quality.<br>

freedemoonline
Download Presentation

Coating Inspector Level 2 NACE-CIP2-001 Free Dumps Online V8.02 | DumpsBase

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Pass NACE-CIP2-001 Exam NACE-CIP2-001 Dumps

  2. Question No.1 The coating applicator has ignored a enface preparation hold point and applied coating over the surface without a sign off from you as the inspector. Your FIRST preferred course of action is to: A. Stop the job B. Require the Applicator to remove the coating C. Advise the Owner and write a Non-Conformance report D. Ignore the situation Answer: B

  3. Question No.2 From a corrosion perspective, the main difference between Ferrous and Non-Ferrous Metals is: A. Cost B. Iron content C. Appearance D. Safety Answer: B

  4. Question No.3 You are the NACE Level 2 Coating Inspector where SSPC PA 2 has been specified with an additional requirement that no individual gauge reading shall be below a certain value. As this is not part of the standard you should: A. Ignore the additional requirement B. Enforce the additional requirement C. Call your supervisor D. Request clarification from the specifier Answer: B

  5. Question No.4 You are a NACE Level 2 Coating Inspector who has just arrived on a job in progress where there is no Inspection and Test Plan (ITP). The first morning you arrive the job is behind schedule and you are asked to take DIY Film Thickness readings. Your FIRST preferred course of action is to: A. Refuse to take readings until an is in place B. Develop your own methodology and proceed take the readings C. Use a generally accepted industry standard and to take readings D. Call your supervisor Answer: C

  6. Question No.5 When conducting inspections the Inspector should follow which standards: A. NACE and SSPC standards in North America B. ISO standards in Europe and Asia C. Australian standards in Australia D. The specified standards Answer: D

  7. Question No.6 The cost of qualified Coating Inspection is normally offset by: A. Lower Application Costs B. Lower Coating Life Cycle Costs C. Lower Safety Enforcement Costs D. Lower Supervision Costs Answer: B

  8. Question No.7 Coating Surveys are legally required: A. On commercial marine vessels and offshore platforms B. On high pressure gas lines and fireproofed structures C. On water tanks and potable water pipelines D. On food and beverage vessels and can linings Answer: A

  9. Question No.8 The Inspectors' goal at the Pre-Job Conference is to: A. Obtain a clear understanding of the Specification B. Discuss contractual requirements C. Manage the meeting so it doesn't go off topic D. Take accurate meeting minutes for distribution Answer: A

  10. Question No.9 An Inspection and Test Plan is required when: A. It is always required B. When the Coating Applicator requests one C. When the Owner specifies one D. When the Inspector requests one Answer: A

  11. Question No.10 You are working as the only in-house NACE Level 2 Inspector in a shop setting when an independent 3rd party NACE Level 3 Inspector, representing the owner, presents you with a copy of a Non Conformance Report (NCR) he has written for a NACE2/SSPC SP 10 centrifugal blast which you had previously approved. Your FIRST preferred course of action is to: A. Verbally challenge the NCR B. Request a re-blast of the item in question C. Consult your supervisor D. Review the NCR with the other Inspector Answer: C

  12. Question No.11 You are working as an inspector in a galvanizing plant for the first time. What are some of the hazards you need to be aware of: A. Risk of chemical exposure B. Risk of skin C. Risk of acid or caustic splashes D. a), b), and c) Answer: D

  13. Question No.12 You are the NACY Coating Inspector on a tank lining project where desiccant dehumidification is being used. Since the first shift of abrasive blasting your readings have indicated relative humidity below 40%; however on the second shift of coating application your readings are indicting 80%. Your FIRST preferred course of action is to: A. Check to See if the dehumidification equipment is operating correctly B. Call your supervisor C. Advise the coating applicator supervisor of your readings D. Document the readings at the end of the shift Answer: C

More Related