1 / 17

2002 STIM-LAB Proppant Consortium

2002 STIM-LAB Proppant Consortium. July 19, 2002 San Diego, California Robert D. Barree Michael W. Conway. 4.2 - Modeling of Proppant Flowback. Original Flowback Model. Major Equations. Normalize velocity to 2 lb/ft 20/40 Lt Wt Ceramic Proppant Factor

fox
Download Presentation

2002 STIM-LAB Proppant Consortium

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 2002STIM-LAB Proppant Consortium July 19, 2002 San Diego, California Robert D. Barree Michael W. Conway 4.2 - Modeling of Proppant Flowback

  2. Original Flowback Model

  3. Major Equations • Normalize velocity to 2 lb/ft 20/40 Lt Wt Ceramic • Proppant Factor • Critical velocity = 0.65 cm/s* PF + CF

  4. Multiphase Flowback

  5. Example of Single Phase Flow Data

  6. Flowback Predictive Model • New modeling approach suggested by: Bi-power law correlations for sediment transport in pressure driven channel flows • J. Wang, D. D. Joseph: Department of Aerospace Engineering and Mechanics, University of Minnesota, Minneapolis, MN • M. Conway, R. D. Barree • Gravity Reynolds number: • Fluid Reynolds number based on particle size

  7. Predictive Equation • In the flowback case, three dimensionless parameters d/W, RG , and Rf, enter the power law correlation : • This conceptually represents the drag force acting on a single particle in a flow field

  8. Re-Look at Single Phase Data

  9. No Flowback Cases were Identified

  10. Effect of Viscosity is Significant

  11. Single Phase 20/40 Flowback Results

  12. Application of Carreau Model • Model for proppant size effect • As approach d/W with no flowback • Flowback velocity is problematic • May not show a clear dependence on closure

  13. Single Phase 16/30 Flowback Results

  14. Single Phase 12/20 Flowback Results

  15. Summary of Empirical Diameter Effect

  16. Addition of Lower Boundary for Flowback

  17. Continuation Program • Design and execute experiments to clarify key parameters required for modeling effort • Example: Minimum velocity for flowback at d/W = 0.01 • Re-examine multiphase data • Examine multiphase approach • Use fractional flow • Relate capillary pressure and saturations to additional cohesion and velocity required to cause flowback • Begin to incorporate the effect of resin coated proppants

More Related