Extruded boss/base. To start using this tool you must draw a 2D This tool is used to make shapes that you choose 3D. Start a new sketch on a plane or an existing surface. Draw a 2D shape that follows the rules of a. The select the extruded boss/base to extrude your shape into a 3D shape.
Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.
To start using this tool you must draw a 2D
This tool is used to make shapes that you choose 3D
Draw a 2D shape that follows the rules of a
You can also choose how much you want to extrude by sliding it with you mouse or entering in the length you would like
Another option for extruded base is the “ up to vertex” which allows you to extrude a shape up to the vertex of another shape.
the two shapes which allows you to extrude a shape up to the vertex of another shape.
This will extrude off of one shape up the vertex of another
The vertex chosen the pink line which allows you to extrude a shape up to the vertex of another shape.
The shape has been extrude up the vertex of your choice
Select one of the check marks and you will have you finished product
Finished “up to vertex option”
You can also extrude off another surface finished product
Fist double click the pace bar. Chose normal to which ever surface you would like to extrude off of.
should come facing you flat
Then draw the shape you would like finished product
Then draw it on the surface
Extruded cut finished product
The extruded cut button is used to cut through 3D shapes
First you need a solid 3D shape finished product
Once you have your solid 3D shape draw the shape you would like to extrude through the 3D shape on the surface you want to cut through
The shape I’m going to extrude finished product
After you have drawn the shape click on it so it turns blue and the select the extrude button
The blind options is how ever far you chose to extrude it
Through all is when the extrude will go all the way through you shape
or slide the cut through your shape
For the through all option you do the same steps in drawing the shape you want to cut but you select the through all option which will go all the way through the 3D shape
The up to next feature. the shape you want to cut but you select the through all option which will go all the way through the 3D shape
You draw the 3Dshape you want to cut through, then draw the shape you want to cut through it on the side, the up to next feature will cut from where you draw the shape to the surface that you choose for it to cut to
The shape I'm going to cut through the 3D shape the shape you want to cut but you select the through all option which will go all the way through the 3D shape
The yellow circle is where it is going to cut too. This will put a hole through the entire 3D shape
The pink line is where it is going to cut up to
The up to next option cuts the hole through the shape from the surface you choose to the other surface you choose
The up to vertex feature. Will cut from where you draw your sketch to a vertex of your choice
To stratou do the same in the way you draw a sketch on the 3D shape
Then select your sketch and choose the extruded cut option sketch to a vertex of your choice
Then the up to vertex option
The vertex you select it to cut too will turn pink sketch to a vertex of your choice