Best industrial floor coatings in india - Flosil-Bet

1. Flexible Coatings for Protection of Marine Structures

2. Marine Coatings:

3. Both abrasive and corrosive, the marine environment is unforgiving of maritime structures such as offshore platforms and rigs, and ocean-going vessels – all of which are major investments for the companies operating them. All activities and structures in a marine environment are impacted by corrosion. The marine environment is also harsh on surface coatings, both in terms of how they wear and how they are applied. Some of the areas most affected are the decks, superstructure, ballast tanks, and anchor or chain wells. These areas suffer extreme exposure to saltwater, chemical agents and abrasion. (Learn about the effects of salt in Salt Limits to Prevent Premature Coating Failures.)

4. One way to minimize and mitigate the effect of some types of corrosion is through the use of flexible surface coatings that are resistant to chemical attack from petroleum products and salts. A corrosion barrier has to have durability and flexibility in addition to being impermeable to the wide range of agents that affect maritime structures. And, to enhance safety for personnel moving around an offshore structure or vessel, spray applied surface coatings with anti-slip properties provide safe decking and walkways.

5. Protecting a Platform Deck from Abrasion Applying coatings that have been developed specifically for maritime structures used in the oil and gas industry can also minimize the abrasive effects of drilling operations. (Read about an offshore facility case study in Tightrope: Identifying Limiting Conditions for Coatings Specification.) An oil rig deck where 14-meter lengths of drill pipe are laid out before being dragged across the deck and pulled up for drilling operations is prone to a large amount of abrasive damage. Most surface coatings are quickly abraded away, exposing the bare metal to corrosion.

6. To prepare these work areas for Industrial Floor Coating , the surface of the deck must be abrasive blasted to clean off any existing coatings and to profile the surface for optimal adhesion of the primer and protective coating. A zinc-rich primer is first applied to the prepared metal surface, over which a second spray primer is rapidly sprayed. The best primer choices for this type of application contain no volatile organic component (VOC) properties, and can be quickly spray applied.

7. For maximum protection, a thick coat of polyurea is applied over the primed area to a nominal thickness of 3000 microns (3 mm). This final coating is chosen for its resistance to weather extremes, excellent flexibility and high-impact strength. Polyurea has the ability to cure rapidly, allowing the crew to walk on the surface in a matter of minutes, which means a facility can be back online sooner. A major consideration in applying any surface treatment is minimizing downtime. Spray coating enables quicker application and less disruption to operations. A rapid setting coating can cure in as little as 6 seconds. Unlike all other coatings, pure polyureas are not adversely affected by ambient moisture or temperature during application, which is an important consideration for offshore operations.

8. Let’s keep in touch: Website: http://www.flosil-bet.com/ Contact: http://www.flosil-bet.com/contact Facebook: https://www.facebook.com/flosilbet/

9. Thank You