1 / 42

OBJECTIVES

OBJECTIVES. 1. Describe various ANSI/TIA/EIA standards for commercial buildings and residential settings. 2. Discuss the specific Technical Systems Bulletins that can affect telecommunications installations.

fleta
Download Presentation

OBJECTIVES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. OBJECTIVES 1. Describe various ANSI/TIA/EIA standards for commercial buildings and residential settings. 2. Discuss the specific Technical Systems Bulletins that can affect telecommunications installations. 3. Recognize and use standard grounding and bonding requirements for telecommunications equipment. 4. Describe documentation methods that are used for cabling in a commercial building.

  2. The six major components of a structured wiring system are: The entrance facility—providing the point where outside cabling interfaces with the intrabuilding backbone cabling—the physical requirements of the network interface being defined in the ANSI/TIA/EIA 569 standard. The main/intermediate crossconnect—located in the equipment room and serving as the interfacing between the entrance facility and the backbone distribution system.

  3. The six major components of a structured wiring system are: (continued) The backbone distribution system—provides the interconnection between the telecommunication closets, equipment rooms, and entrance facility, and consists of the backbone cables, intermediate and main crossconnects, mechanical terminations, and the patch cords or jumpers used for backbone-to-backbone crossconnections. The horizontal crossconnect—provides the interconnection between the work areas and the telecommunications closets, typically on one floor of a building.

  4. The six major components of a structured wiring system are: (continued) The horizontal distribution system—extends from the work area telecommunications outlet to the telecommunications closet, and consists of the horizontal cabling, telecommunications outlet, cable terminations, and all related crossconnections. The work area(s)—components that extend from the telecommunications outlet to the station equipment, using wiring that is simple to interconnect, move, and change.

  5. The ANSI/TIA/EIA 569 standard addresses the following elements of building pathways and spaces: Backbone Pathways—consist of intrabuilding (within a building) and interbuilding (between buildings) pathways, and may be either vertically or horizontally oriented. Intrabuilding Pathways—provide the means for placing backbone cables from the entrance facilities or space, to telecommunications closets, and from equipment rooms, to either the entrance facilities or space, or telecommunications closets. They consist of conduit, sleeves or slots, and trays. Interbuilding Pathways—interconnect separate buildings, such as those in campus environments, consisting of underground, buried, aerial, or tunnel pathways.

  6. The ANSI/TIA/EIA 569 standard addresses the following elements of building pathways and spaces: (continued) Entrance Facility—consists of the telecom-munications service entrance to the building, including the entrance point through the wall, and continuing to the entrance room or space, and may contain the backbone pathways that link to other buildings in campus environments. Separation of telecommunication circuits from power circuits and other electro-magnetic energy sources is currently being studied by the standards committees of the ANSI/TIA/EIA.

  7. The ANSI/TIA/EIA 569 standard addresses the following elements of building pathways and spaces: (continued) Equipment Room—centralized space for telecom-munications equipment, which should house only equipment directly related to the telecommunications system and its environmental support systems. Sizing—must meet the known requirements of specific equipment. If equipment requirements are unknown, plan for 0.75 square feet (0.07 square meters) of equipment room space for every 100 square feet (10 square meters) of workstation space. Regardless of equipment used, there must be a minimum of 150 square feet (14 square meters). Special-use building sizing—must base ER size on the number of workstations.

  8. The ANSI/TIA/EIA 569 standard addresses the following elements of building pathways and spaces: (continued) Horizontal Pathways—should provide the facilities for the installation of telecom-munications cable from the telecommunications closet, to the work area telecommunications outlet. Design guidelines and procedures are specified for underfloor, access-floor, conduit, tray and wireway, ceiling, and perimeter facilities.

  9. The ANSI/TIA/EIA 569 standard addresses the following elements of building pathways and spaces: (continued) Telecommunications Closet—must be dedicated to telecommunications functions and support facilities only, with a minimum of one closet per floor. Additional closets should be provided for each area up to 10,000 square feet (1,000 square meters) when either the floor area served exceeds 10,000 square feet (1,000 square meters), or the horizontal distance exceeds 300 feet (90 meters).

  10. The ANSI/TIA/EIA 569 standard addresses the following elements of building pathways and spaces: (continued) Workstation—primarily concerned with the telecommunications outlets, because they are the usual connection point between the horizontal cable and the connecting devices in the work area. The reference is made to the overall box or face plate as opposed to individual outlets/connectors, with a minimum of one outlet face plate per workstation required. The typical workstation space allocation is one every 100 square feet (10 square meters).

  11. ANSI/TIA/EIA 569 provides recommendations for the physical spaces and pathways used by modern telecommunications cabling systems and equipment, with recommendations made in the following areas: Telecommunications spaces, including work areas, telecommunications closets, equipment rooms, and entrance facilities. Specifications provided include: The sizing of telecommunications spaces Floor loading requirements—dynamic and static Environmental considerations—floor coverings, lighting requirements, and so on

  12. ANSI/TIA/EIA 569 provides recommendations for the physical spaces and pathways used by modern telecommunications cabling systems and equipment, with recommendations made in the following areas: (continued) Telecommunications pathways, including horizontal and backbone cable distribution systems—conduits, sleeves, trays, and so on, and grounding pathways. Specifications provided include: The number of cable pathways to install Acceptable types of pathways Installation procedures

  13. The ANSI/TIA/EIA 606 standard recommends documenting the cabling system in the following way: Assign a unique identifier to each element of the cabling system. Create a document for each of the identified elements. Link related records to each other.

  14. ANSI/TIA/EIA 607 specifies the requirements for: A ground reference for telecommunications systems within the telecommunications entrance facility, the telecommunications closet, and equipment room. Bonding and connecting pathways, cable shields, conductors, and hardware at telecommunications closets, equipment rooms, and entrance facilities. Interconnectivity to other building grounding systems.

  15. Specifications for STP-A telecommunications cable include: Color-coding pair 1 as Red/Green, and pair 2 as Orange/Black Shielded, 150-ohm, 2-pair cable using 22 AWG (0.63 mm) solid conductors Should be marked as “150 ohm STP-A”, in addition to any markings required by local or national safety codes Same mechanical and transmission requirements to be applied to backbone and horizontal cables, with additional requirements provided for outdoor runs

  16. Specifications for STP-A connectors include: Standard outlet interface and pair assignments are similar to the ISO 8802-5 Token-Ring connector (IEC 807-8), except that performance requirements are more severe. Marked as “STP-A”, with other markings required by local or national safety codes

  17. Specifications for STP-A patch cables include: Stranded conductors at 26 AWG (0.4 mm) Allows for an overall shield, rather than individually shielded pairs Less severe attenuation and NEXT loss requirements than horizontal cable

  18. Specifications for STP-A installation practices include: Shields should be grounded at the telecommunication grounding busbar. Shield voltage to ground should not exceed 1 Vrms at the work area. Shield resistance to ground should not exceed 3.5 ohms at the work area. Fiber is recommended for runs between buildings at different ground potentials.

  19. Table 7-1: TIA/EIA and ISO/IEC Standards Specifications

  20. Table 7-1: TIA/EIA and ISO/IEC Standards Specifications (continued)

  21. Figure 7-1: Reconfigurable Panel

  22. Figure 7-2: Using a MUTOA

  23. Figure 7-3: Using a MUTOA to Reconfigure a Work Area

  24. Figure 7-4: Using a CP

  25. Some important requirements of CPs are: Consolidation points shall not be located in any obstructed area. Consolidation points shall be located in fully accessible, permanent locations such as building columns and permanent walls. Consolidation points shall not be installed in furniture unless that unit of furniture is permanently secured to the building structure.

  26. Some important requirements of CPs are: (continued) Consolidation-point accessibility and marking should follow the ANSI/TIA/EIA T568A recommendation that a consolidation point should be readily accessible and its location visibly marked, for ease of routine maintenance and reconfiguration.

  27. Figure 7-5: Using a CP to Reconfigure a Work Area

  28. Consider the following as legitimate open office locations for a CP or a MUTOA: Utility columns attached to furniture panels Overhead storage cabinets Enclosures at floor level Freestanding utility columns

  29. The National Electric Code (NEC) Article 800, called Communications Circuits, covers the installation of the following communications equipment and circuits: Telephone Telegraph (except radio telegraph) Outside wiring for fire alarms, burglar alarms, and similar central station systems Telephone systems not connected to a central station system, but using similar types of equipment

  30. Table 7-2: NEC Substitution Chart

  31. Table 7-3: NEC Wire Coding

  32. Figure 7-6: Cable Substitution Hierarchy

  33. REVIEW QUESTIONS What is the purpose of the ANSI/TIA/EIA T568A standard? 1

  34. REVIEW QUESTIONS Name the six items covered by the ANSI/TIA/EIA standard. 2

  35. REVIEW QUESTIONS State the purpose of the ANSI/TIA/EIA Telecommunications Pathways and Spaces certification. 3

  36. REVIEW QUESTIONS What is the ANSI/TIA/EIA 570 standard and how is it different from the T568A standard? 4

  37. REVIEW QUESTIONS Name the three items that the ANSI/TIA/EIA 606 Administration Standards for the Telecommunications Infrastructure of Commercial Buildings standard recommends for documentation of a telecommunications cabling system in a commercial building. 5

  38. REVIEW QUESTIONS List five types of telecommunications pathways. 6

  39. REVIEW QUESTIONS List four types of telecommunications spaces. 7

  40. REVIEW QUESTIONS How did the FCC Part 68 decision affect the telecommunications network in the United States? 8

  41. REVIEW QUESTIONS Which bonding and grounding guidelines take precedence in a given application, ANSI/TIA/EIA standards or national/local electrical code standards? 9

More Related