1 / 9

Ralph E. Morris ENVIRON International Corporation November 19, 2013

Regional Modeling as a Predictor of Air Pollution and for Developing Effective Emission Control Strategies. Ralph E. Morris ENVIRON International Corporation November 19, 2013. MM5 27km (cross) 122R X 188C. CTM 27km (cross) 94R X 124C. MM5 9km (cross) 108R X 147C. CTM 9km (cross)

flavio
Download Presentation

Ralph E. Morris ENVIRON International Corporation November 19, 2013

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Regional Modeling as a Predictor of Air Pollution and for Developing Effective Emission Control Strategies Ralph E. Morris ENVIRON International Corporation November 19, 2013

  2. MM5 27km (cross) 122R X 188C CTM 27km (cross) 94R X 124C MM5 9km (cross) 108R X 147C CTM 9km (cross) 48R X 66C Center (28.5N, 114OE) MM5 3km (cross) 87B X 114C CTM 1km (cross) 84B X 120C MM5 1km (cross) 106R X 142C Center (28.5N, 114.OE) ENVIRON Experience in Regional Modeling • Developed Comprehensive Air-quality Model w/ extensions (CAMx) • Largest Photochemical Grid Model (PGM) development/application technical group in the world (outside of USEPA) • Numerous applications in U.S. for PM2.5 and O3 planning • Selected by Alberta Environment to assess Oil Sands AQ impacts • Selected by Hong Kong Environmental Protection Department (HKEPD) to develop new AQ Modeling System for Asia • 27/9/3/1 km Domains 2

  3. Regional Photochemical Grid Models • Regional Emission Inventories for All Sources • Mobile (On-Road, Non-Road, Commercial Marine, Locomotive, Airplanes) • Point (Electrical Generating Units [EGUs], non-EGU Point) • Area (Consumer Products, Agricultural, Home Heating, etc.) • Biogenic/Natural (Plants, Lightning, Sea Salt, etc.) • Three-Dimensional Meteorological Conditions • From weather prediction model (WRF) • Photochemical Grid Models (PGMs) • Brings closure between emissions and measurements • Used to project changes in air quality in response to changes in emissions • Can be used to calculate source apportionment • What sources are causing the air pollution problem

  4. Example: December 2012 Liberty-Clairton (Pittsburgh) PM2.5 State Implementation Plan (SIP) • Treat local sources using hybrid plume model (Plume-in-Grid) and 0.8 km high resolution grid • PM2.5 Problem at Liberty due to regional transport plus large local source contributions • Set up regional CAMx PGM using 36 km, 12 km, 4 km and 0.8 km grid resolution • Emission control measures to identify sources responsible for PM2.5 problem and show attainment by 2014

  5. Hong Kong PM2.5 Source Apportionment Modeling • Identify geographic regions and source categories that contribute to high PM2.5 in Hong Kong] • Example for Tung Chung (near HK Airport) • Hong Kong Area, Mobile and Point about equally important (1.5-2.0 µg/m3) • HK contributions (~5.5 µg/m3) overwhelmed by Pearl River Delta and Mainland China (~23 µg/m3)

  6. USA Good Neighbor Policy for Air Pollution • 1990 Clean Air Act Amendments (CAA) • Formed Northeastern States Ozone Transport Commission • Requirement for Upwind States to address significant contributions to nonattainment in a Downwind State • 1994-1998 Ozone Transport Assessment Group (OTAG) • EUSA – 1998 NOX SIP Call • EPA EUSA Transport Rules: 2005 CAIR & 2012 CSAPR • Address O3 and PM2.5 Transport • USEPA used CAMx Source Apportionment to determine which upwind states have a significant contribution to downwind nonattainment • ENVIRON hired to address role of ozone and PM2.5 transport in western U.S. (WestJumpAQMS)

  7. Source Contributions to Maximum 24-Hour PM2.5 Concentration in Denver, Colorado • Source Contributions • Area (AR: 42%); Mobile (MV: 33%) and Point (PT: 18%) • PM2.5 Species Contributions • Crustal (34%), Organic Aerosol (OA: 37%) and Elemental Carbon (EC: 16%)

  8. Use of Regional Photochemical Grid Models • Brings closure between measured air pollution and emissions – identify what emission sources are causing the problem • Identifies which sources contribute the most to air pollution so would have the biggest benefits when controlled • Can target implementation of control technology to achieve the greatest benefits as quick as possible • Source apportionment techniques can be used to obtain contributions down to the individual source • Large fall off in contributions with distance • Can identify source contributions by major source category • On-Road and Non-Road Mobile Sources • Marine Vessels • Electrical Generating Units (EGU) points • Non-EGU Industrial Point Sources • Home Heating and Cooking • Agricultural • Burning/Fires • Biogenic Sources • Dust (Fugitive and Natural) • Other Natural (Lightning/Sea Salt) • International Transport

  9. Use of Regional Photochemical Grid Models • Can calculate visibility from the PGM modeled PM concentrations • Visual range important public perception air pollution metric • Helps evaluate alternative control strategies • Benefits Mapping and Analysis Program (BenMAP) • Calculate health impacts due to alternative scenarios (e.g., PM2.5) using PGM output • Also economic benefits of reducing air pollution

More Related