How to configure your NETGEAR Wi-Fi Range Extender through manual setup? • This Presentation will guide you that ‘How to connects your NETGEAR Wi-Fi Extender using manual setup’ When your NETGEAR WI-FI Extender is already connected properly to the router and you have received your IP address before.
some guidelines to connect the NETGEAR Wi-Fi Extender manually: - • Via Ethernet cable you can connect your NETGEAR WI-FI Extender by using computer. • While logging to the web via http://myWiFiext.net of your NETGEAR WIFI Extender, you will automatically jump to the username and password section. • Username : admin • Password: password • Username and password should be in lower and upper case. • After the login process, go to settings and then wireless settings.
Under the security option, check the password box that you have entered. Your password should be same as your router password if not, then you have to change it and enter new password as your router. • Press the ok button to Apply Refresh all Wi-FI devices to the NETGEAR Wi-Fi Extender. • Connect all Wi-FI devices again to the NETGEAR Wi-Fi Extender.
Guidelines without an Ethernet port • What actually you have to do here is that, reset your NETGEAR WiFi Extender by going on factory default settings and hold the button for 7 seconds. • Connect your NETGEAR Wi-Fi extender via Wi-Fi. • Enter http://mywifiext URL in the space given on web browser. you will be directed to web user interface login • The default username and password for NETGEAR login is admin and password. • Follow on screen instructions to setup link to your router • Try connecting all wireless devices again to the NETGEAR range Extender Wi-Fi.