1 / 7

How to repair broken hinges on hardcovers

PRST5450-eTraining Presents…. How to repair broken hinges on hardcovers . http://cfuller-etraining.yolasite.com/. Step #1: If the super is not split all the way, use a book repair knife to slit the remainder. Get rid of loose paper and glue from the visible signatures.

ferrol
Download Presentation

How to repair broken hinges on hardcovers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PRST5450-eTraining Presents… How to repair broken hinges on hardcovers http://cfuller-etraining.yolasite.com/

  2. Step #1: If the super is not split all the way, use a book repair knife to slit the remainder. Get rid of loose paper and glue from the visible signatures.

  3. Step #2: Cut a piece of binder tape the length of the book’s contents. Smear adhesive to one surface of the tape (two flaps). Fit one flap over the flyleaf and stick the other flap to the back of the signatures.

  4. Step #3: With a paste brush, apply adhesive to the opposite surface of the tape (two flaps). Press the spine cover against the glued tape (back of the signatures), then hold for a few moments.

  5. Step #4: Fasten the remaining flap to the end paper. With a bone folder, level the tape.

  6. Step #5: Place waxed paper between the end paper and the flyleaf and close the book. Place under a book weight to dry.

  7. *Allow the adhesive to dry after each step of the repair process. If both front and back hinges are broken, repeat the process on each one.

More Related