1 / 24

GPS- Collecting Data

GPS- Collecting Data. Now that you have your data dictionary loaded, let’s configure the unit and take it outside! RECOMMENDED: Print this & take it outside with you!. Restoring Factory Settings.

fawzia
Download Presentation

GPS- Collecting Data

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. GPS- Collecting Data Now that you have your data dictionary loaded, let’s configure the unit and take it outside! RECOMMENDED: Print this & take it outside with you!

  2. Restoring Factory Settings • First thing that we need to do is to restore the factory settings on the rover. This step should not be performed on a unit already in use in another project as loss of data, data dictionary and settings will occur. • Turn the rover on. You should come to the “Main Menu” screen. • Using the arrow buttons to move you around, scroll down to highlight “Configuration”. Push the “diamond” or “Enter” button to select.

  3. Restoring Factory Settings The screen should now look like this: 3. Using the arrow buttons again, scroll down and select “Fact. Defaults”. Push “Enter”. 4. Use the arrows to highlight “Set Defaults” and push “Enter”. 5. Press “Enter” once again to confirm your decision.

  4. Your screen should look like this. This tells us that the defaults have been restored. To exit from this screen, push the “Esc” button until you are back to the main screen. Now, we’re ready to collect data!

  5. Before you go out into the field to collect data you need to be a little familiar with the data that you want to collect. • The following slides have all of the features and their attributes that you need to collect while in the field. • Feature: something that can be mapped using the GPS • e.g. walkway, building, athletic field • Attribute: information about a feature • e.g. Walkway Width (feet) = “4” • Building Name = “Main Office” • Athletic Field Type = “Baseball”

  6. These are the features that you will collect and their attributes. • Buildings (polygon) • Name (text: type in the name of the building) • Function (menu: choose academic; administration; or athletic) • Athletic Field (polygon) • Type (menu: choose football; baseball; or intramural) • Name (text: type in the name of the athletic field) • Flagpole (point) • Responsibility (menu: choose student body; administration; student organization; or other) • Height (number: type in the height of the flagpole in feet) • Construction (menu: choose aluminum; steel; wood; or other) • Condition (menu: choose good; fair; or poor) • Walkway (line) • Surface (menu: choose concrete; gravel; or asphalt) • Width (number: type in the width of the walkway in feet) • Bleachers (polygon) • Function (menu: choose athletic; assembly; performance; or other) • Construction (menu: choose wood; aluminum; or other) • Portable (select Yes or No) • Parking Lot (polygon) • Surface (menu: choose asphalt; concrete or grass) • Use (menu: choose multiuse; students; or faculty) This is a very useful page while you are outside mapping your school.

  7. Before you collect your data(Hints for easier data collection) • You can collect more than onefeature in any rover file: • (e.g. 3 athletic fields, 10 buildings, 14 walkways, 2 flagpoles, and 5 parking lots) • These can all be contained within one rover file. However you may not be able to map your entire school in one EAST class: • Therefore you need a plan of action: • Collect one type of feature (e.g. all walkways) within one EAST class and move onto another feature type in your next EAST class. • For example: • First EAST class: collect all of the parking lots • Second EAST class: collect all of the athletic fields • And so on until you have collected all of the features in your school. • You can transfer each individual rover file to your PC before you begin the • next rover file. (see Ch 6: transferring GPS data)

  8. Getting Satellites Now we are ready to take our GPS outside! • 6. From the Main Menu, select “GPS Status”. • 7. Now, select “Sat Tracking”. We should now be at this screen. • It tells us what satellites the rover sees, and how many it has been able to lock. Each arrow represents a satellite whose location has been confirmed. The objects in the bottom left corner of the screen are also indicators.

  9. Getting Satellites • Your screen may look like this, or it may have writing across the bottom that reads “PDOP”. • A high PDOP means that our satellites are not in a good geometry for accurate readings. • Once you have reset the factory defaults on the rover, the limit for PDOP is 6, so anything above this will not allow us to collect positions. Note: You need to be outside for the GPS to “see” any satellite vehicles (SVs). If you are outside and the PDOP is above 6, then you may not be holding the rover correctly:

  10. wrong wrong right Holding the Rover • Your body can block satellite signals, so it is important to hold the GPS rover correctly. • For the best reception: • Hold the rover away from your body. • Tilt it so that the top of the GPS (the • antenna) is parallel with the ground. • Hold it up so that you and the satellites can see it. Keep in mind that your friends can block signals too, so don’t let them crowd you. • It may also take a few minutes to get a good set of satellites – especially if the rover has been inside for a long time or has never been turned on.

  11. Getting Satellites Notice here that by standing in the right position, our PDOP has dropped from 6.97 to 3.89. We picked up a new satellite that was in a better position to give us good readings. Now, we can collect points! If at any time you notice that your counter is not moving, you can get to this menu from the Data Collection screen by selecting “Main Menu” and then “GPS Status”.

  12. Data Capture Screen 8. Push “Esc” to get back to the “Main Menu”. Then, use the arrows to scroll to “Data Capture”, and push “Enter”. 9. Scroll down to “Dictionary” and push “Enter”. 10. The dictionary loaded should be “schoolmap”. If it is not, delete the other dictionary and reload “schoolmap” in the lab.

  13. Opening a New File 11. Push “Esc” to bring you to the “Data Capture” screen. 12. Use the arrow keys to scroll down to “Open Rov. File” and push “Enter”. “Rov.” stands for “Rover” (as in GPS Rover). 13. Scroll down to “Pause” in the Rover File options and push “Enter”. This will pause the rover so that we will be able to enter in attributes before collecting any location data.

  14. Selecting a Feature • Scroll down to “Select Feature” and push “Enter”. • Here, you see a listing of types of features that you can collect when you are out in the field. You have a choice of five features, three are polygons, one is a line and one is a point. • This tutorial will walk you through collecting one athletic field and one flagpole. • Be aware that that there are a couple of different methods for collecting features. You should be familiar with these before going out to collect data. PLEASE remember that you can collect more than one feature within a rover file!

  15. Collecting Data – Athletic Field • To collect an athletic field feature go to the actual field that you are planning on mapping. • Scroll down to “Select Feature” and push “Enter”. • Now, we see a list of all of the possible features that we can collect. • Scroll down to “athletic_field” and push “Enter”. • Scroll down to type of field, and push “Enter”.

  16. Adding and Changing Attributes • This is a menu list of types of fields. Select the type of field that you are about to map by scrolling down and pushing “Enter”, when the field type is highlighted. • When you have done this, it brings you back to the screen with both “type” and “name” listed. • Select “Name” and push “Enter”. The screen should look like this: You will fill in the data on this line. Select this dotted line and push “Enter”.

  17. Adding and Changing Attributes 20. Using your arrow buttons, scroll up and down through the alphabet to select your letters. When you have the correct letter, push the right arrow button to move over one space. 21. When you have completed naming your field, push “Enter” again to get to the previous screen.

  18. Collecting Data – Athletic Field • The unit is still paused, and no points have been collected. Walk to the corner of the field. • 22. If your field is rectangular, you can get the straight sides by collecting points only at the corners. To do this, select “Resume”. This is how you can start and pause the collection of data. • 23. Watch the counter in the corner. Collect one position, and then push “Pause” again to pause the collection. • 24. Do this for each corner, selecting “Pause” at the last corner.

  19. Collecting Data – Athletic Field 25. When you are done, select “Close Feature” to close the feature. You should be back to the “Select Feature” menu. You should be back to the “Select Feature” Screen. You have collected one athletic field feature.

  20. Collecting Polygon or Line features Polygons You can start collecting and walk around the feature, collecting data continuously. This is best for curvy features (like a baseball field). or You can collect just the corners, using the log button to pause in between point collection. This is best for rectangular features like a building or football field. The GPS will automatically close the polygon for you (so you don’t need to go back to your starting point). Hint: Line features are collected in the same way as polygons, except that the GPS doesn’t close the polygon. Lines For curvy sidewalks collect data continuously. Straight walkways: collect data at the corners, pausing the unit in between point collection.

  21. Collecting Data - Flagpole Now we are going to collect a point feature – your school’s flagpole. 26. Walk to your school’s flagpole. On your GPS scroll down to “flagpole” and push “Enter”. As long as you ended the collection of the field in the paused mode, your unit should still be paused. If it isn’t, select “Pause”. 27. Add in the attributes for responsibility (who is in charge of putting up and taking down the flag).

  22. 28. Scroll down to “height” and push “Enter”. 29. The default for “height” is 50 feet. Use your up and down arrow buttons to change this number to the height of your flagpole. When you are finished, push “Enter”. 30. Finish adding attributes. When you are done, select “Resume” to start collecting data. 31. To collect a point, you need to stand still until your counter reaches 120 points. When you have done this, push “Close Feature”.

  23. Collecting Point features Points: When collecting points, the GPS will take an average location based on the number of points you collect (when collecting the flagpole you need 120 points, collecting 1 point each second, therefore you have to stand still for 2 minutes). Now you should be familiar with collecting features using your GPS. You should be able to map your entire school, using the methods that have been given as an example in the previous slides. Remember: that you can collect more than one type of feature within a rover file. After you have finished collecting all of the features that you can in the time allowed you can close the rover file and take the GPS back inside to transfer the data to your PC. You may need to make multiple data collection trips to map your whole school – so plan what you are going to collect before going outside! (see slide 6).

  24. Closing your file • Once you have finished collecting all of your features that you can in the time allowed you can close your rover file. • Select “Close File” and push “Enter”. • Confirm closing the file by selecting “Yes” and pushing “Enter”. • Push “Esc” to get out of the data collection and back to the main menu. The file has been stored, and you can now take it back inside. • Chapter 6 will describe how to transfer your GPS data to your computer.

More Related