1 / 15

Using DSR in ns2

Objective. Quick introduction to using DSRNot about wireless simulation as suchLeaves not much in terms of using DSRDSR code recompiling for various optionsDSR code recompiling for various trace messages. DSR characteristics. ReactiveSource-routingARP-like behaviorRouter object in ns

fausta
Download Presentation

Using DSR in ns2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


    1. Using DSR in ns2 Rishi Sinha

    2. Objective Quick introduction to using DSR Not about wireless simulation as such Leaves not much in terms of using DSR DSR code recompiling for various options DSR code recompiling for various trace messages

    3. DSR characteristics Reactive Source-routing ARP-like behavior Router object in ns sends and receives packets from agents and link layer

    4. DSR basic mechanisms Route discovery limited Route discovery flooding Source route construction Route reply Route error Salvaging

    5. DSR in ns script $ns_ node-config -adhocRouting $val(rp) \ -llType $val(ll) \ -macType $val(mac) \ -ifqType $val(ifq) \ -ifqLen $val(ifqlen) \ -antType $val(ant) \ -propType $val(prop) \ -phyType $val(netif) \ -channelType $val(chan) \ -topoInstance $topo \ -agentTrace ON \ -routerTrace ON \ -macTrace OFF \ -movementTrace OFF

    6. The val array set val(chan) Channel/WirelessChannel ;# channel type set val(prop) Propagation/TwoRayGround ;# radio-propagation model set val(netif) Phy/WirelessPhy ;# network interface type set val(mac) Mac/802_11 ;# MAC type set val(ifq) Queue/DropTail/PriQueue ;# interface queue type set val(ll) LL ;# link layer type set val(ant) Antenna/OmniAntenna ;# antenna model set val(ifqlen) 50 ;# max packet in ifq set val(nn) 2 ;# number of mobilenodes set val(rp) DSR ;# routing protocol

    7. DSR code in ns $NS/dsr/dsragent.cc Edit to make changes In $NS: make depend make ns defaults - $NS/tcl/lib/ns-default.tcl

    8. DSR traces using node-config $ns_ node-config -routerTrace ON s 128.014398266 _0_ RTR --- 3 DSR 24 [0 0 0 0] ------- [0:255 2:255 32 0] 1 [1 2] [0 2 0 0->0] [0 0 0 0->0] Send Time Node Router or agent Packet (event) id Packet type Size

    9. DSR traces using DSR code Unconditional trace () statements Conditional trace statements verbose trace() implementation checks for verbose So unconditional not output Make changes in dsragent.cc and recompile ns

    10. Non-verbose output void DSRAgent::trace(char* fmt, ...) { ... ?if (verbose) { va_start(ap, fmt); vsprintf(logtarget->pt_->buffer(), fmt, ap); logtarget->pt_->dump(); va_end(ap); ?} }

    11. Non-verbose output Remove the conditional shown above SRR 127.93668 _0_ new-request 0 0 #1 -> 2 SRR 128.00957 _0_ new-request 16 0 #2 -> 2 SRR 128.021161410 _2_ reply-sent 2 -> 0 #2 (len 3) [(0) 1 2 ]

    12. Verbose output Let the conditional be Output will include non-verbose output Change these lines: static const int verbose = 0; static const int verbose_srr = 0;

    13. Verbose output S$miss 127.93668 _0_ 0 -> 2 Sdebug 127.93668 _0_ stuck into send buff 0 -> 2 S$hit 135.40639 _0_ 0 -> 2 [(0) 1 2 ]

    14. DSR options Timeouts Time arp_timeout = 30.0e-3; // (sec) arp request timeout Time rt_rq_period = 0.5; // (sec) length of one backoff period Time rt_rq_max_period = 10.0; // (sec) maximum time between rt reqs bool dsragent_snoop_forwarded_errors = true; // give errors we forward to our cache? bool dsragent_snoop_source_routes = true; // should we snoop on any source routes we see?

    15. Trace file analysis Using grep and awk to get times of all cache misses: $ cat file.tr > awk $1==S\$miss{print $2, $3} Using grep and awk to get times of all drops: $ cat file.tr > awk $1==SRR && $4==dropped{print $2, $3}

More Related