1 / 11

VMware SD-WAN Design and Deploy Skills 5V0-42.21 Real Questions

Passcert new VMware SD-WAN Design and Deploy Skills 5V0-42.21 Real Questions can not only help you 100% pass the exam, but also provide you a free one-year update service.

examquestionsonline
Download Presentation

VMware SD-WAN Design and Deploy Skills 5V0-42.21 Real Questions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 5V0-42.21 Training Questions VMware SD-WAN Design and Deploy Skills https://www.passquestion.com/5V0-42.21.html

  2. Practice PassQuestion 5V0-42.21 Training Questions ensure your 100% success Question 1 An Enterprise customer just acquired a new company, and the Network Enterprise administrator was tasked to integrate over 20 new branches into their existing SD- WAN network. However, these branches have overlapping IPs with the existing branches subnets. A. Configure a NAT hand off rule at the VMware SD WAN gateway assigned to these new blanches, translating the new branch subnets into a new nan-overlappingsubnet B. Configure a LAN-side NAT rule at the branchdevice settings, translating its subnets into a new non-overlapping subnet C. Configure a NAT firewall rule in each branch, translating itssubnets into a new non-overlapping subnet D. Configure a policy based NAT tor each branch translating its subnets Into a new non-overlappingsubnet Answer: B

  3. Practice PassQuestion 5V0-42.21 Training Questions ensure your 100% success Question 2 Which statement describes a characteristic of VMware SU-WAN Edge (VCL) clustering? A. One VCE cluster can be formed with both virtual and hardware at the same lime B. A VCE cluster requires one dedicated interface for HA sync C. VCF clusters member sync flow tables between themselves. D. VCE cluster members should have unique IP addresses on its WAN interfaces Answer: C

  4. Practice PassQuestion 5V0-42.21 Training Questions ensure your 100% success Question 3 Due to very strict security policies an enterprise customer is looking for an on-premises deployment of the VMware SD-WAN Orchestrator and Controllers. Customer data is not expected to flow through this Controller, however it is desirable that management plane traffic towards the Orchestrator coming from VMware SD-WAN Edges can take the overlay tunnels through this controls. What are some of the needed steps to achieve the requirements above? A. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and enable management plane forward B. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and add static host routes with NAT hand off settings porting to the Orchestrator IPs under Partner Gateway advanced hand off settings C. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plane and Partner Gateway role and add static host mules with NAT hand off settings pointing to the Orchestrator IPs under Partner Gateway advanced hand off settings D. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plant- and Partner Gateway role and add a static default route with NAT hand off settings under Partner Gateway advanced hand oft settings Answer: C

  5. Practice PassQuestion 5V0-42.21 Training Questions ensure your 100% success Question 4 What is considered a typical VMware SD-WAN use case? A. Provide a distributed (per device) commands line interface (CLI) based configurations to implement complex network designintegrationoptions. B. Provide high speed layer 2 data center interconnects. C. Provide cloud delivered central management Orchestrator toimplementcomplex design network integration options. D. Provide management, control plane, and data forwarding from a single system to reduce complexly for the network administrator. Answer: D

  6. Practice PassQuestion 5V0-42.21 Training Questions ensure your 100% success Question 5 Company a has recently acquired Company B, which has two remote office. Company A is using VMware hosted Cloud Gateways, and Company B is using a VMware SD-WAN with a Hub-Spoke topology. Which VEware Cloud VPN solution an administrator configure to establish connectivity between the offices of Company A and Company B? A. Site-to-Site VPN B. Branch to CASH C. Branch to Branch VPN D. Branch to Non VMware SU-WAN Site Answer: B

  7. Practice PassQuestion 5V0-42.21 Training Questions ensure your 100% success Question 6 A VMware SD-WAN customer has a requirement to enable single sign-on (SSO) authentication to their existing provider (idp) for access to their Orchestrator account. Which authentication protocol is supported? A. OpenID Connect (OlDC) B. LDAP C. SAML 2.0 D. TACACS+ Answer: C

  8. Practice PassQuestion 5V0-42.21 Training Questions ensure your 100% success Question 7 Which form factor can a customer use to deploy VMware SD WAN Edge? A. Oracle Virtual Box B. Open Virtualization Appliance C. Docker Container D. Hyper-V Virtual Machine Answer: B

  9. Practice PassQuestion 5V0-42.21 Training Questions ensure your 100% success Question 8 A network architect is designing a VMware SD-WAN architect for customer using VMware hosted VCO and VCGs, white VCEs will be deployed at the customer’s branches and data centers. The network architect would like to achieve control plane redundancy. Which action, if any, should be taken to meet this goal? A. Multiple VCGs are automatically assigned to every VCE and control plane on VCUs is always enabled, so control plane redundancy has been taken care of already B. Multiple VCFs at data centers can becontoured to function as route reflectors to achieve control plane redundancy. C. VCGs automatically assigned to a VCF. do not participate in control plane At least two dedicated Controllers should be manually assigned for each VCGs to achieve control plane redundancy. D. VCGs automatically assigned to a VCE do not participate in control plane At least two dedicated Controllers should be manually assigned for the customer to achieve control plane redundancy Answer: B

  10. Practice PassQuestion 5V0-42.21 Training Questions ensure your 100% success Question 9 A customer has deployed VMware SD_WAN solution An administrator asked to imported additional security for traffic going to internet without investigating in new hardware solutions. A. Service chaining with DFW in NSX-V B. Service chaining with Zscaler Cloud Security Service C. Service chaining with DFW in NSX-1 D. Service chaining with AWS Cloud Security Answer: D

  11. Practice PassQuestion 5V0-42.21 Training Questions ensure your 100% success Question 10 A MSP partner needs to setup a Partner Gateway and configure the Handoff Interlace. Which are the valid configuration options for the Tag type? A. None, 802 1q, 802 3ad, and QinQ(0x8100) / QinQ(0x9100) B. None. 802. 1q. 802, 1 ad, arid QinQ(0x8100) / QinQ(0x9100) C. None, 802 1q. 802_1ac, and Qin(0x8100) / QinQ(0x9100) D. None, 802 1d, 802.1ad, and QinQ(0x8100)/ QinQ(0x9100) Answer: B

More Related