1 / 11

CCNP Security 300-710 SNCF Updated Questions

PassQuestion provides CCNP Security 300-710 SNCF Updated Questions which cover all related objectives so that you can practice real questions and answers which are really helpful to pass your exam.

examquestionsonline
Download Presentation

CCNP Security 300-710 SNCF Updated Questions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 300-710 Training Questions Securing Networks with Cisco Firepower (SNCF) https://www.passquestion.com/300-710.html

  2. Practice PassQuestion 300-710 Training Questions ensure your 100% success Question 1 Which CLI command is used to control special handling of Client Hello messages? A. system support ssl-client-hello-tuning B. system support ssl-client-hello-force-reset C. system support ssl-client-hello-display D. system support ssl-client-hello-reset Answer: A

  3. Practice PassQuestion 300-710 Training Questions ensure your 100% success Question 2 A network engineer is extending a user segment through an FTD device for traffic inspection without creating another IP subnet. How is this accomplished on an FTD device in routed mode? A. by assigning an inline set interface B. by leveraging the ARP to direct traffic through the firewall C. by bypassing protocol inspection by leveraging pre-filter rules D. by using a BVl and create a BVl IP address in the same subnet as the user segment Answer: D

  4. Practice PassQuestion 300-710 Training Questions ensure your 100% success Question 3 An engineer is implementing Cisco FTD in the network and is determining which Firepower mode to use the organization needs to have multiple virtual Firepower devices working separately inside the FTD application to provide traffic segmentation. Which deployment mode should be configured in the Cisco Firepower Management Console to support these requirements? A. single-context B. single deployment C. multiple deployment D. multi-instance Answer: D

  5. Practice PassQuestion 300-710 Training Questions ensure your 100% success Question 4 An engineer is implementing Cisco FTD in the network and is determining which Firepower mode to use the organization needs to have multiple virtual Firepower devices working separately inside the FTD application to provide traffic segmentation. Which deployment mode should be configured in the Cisco Firepower Management Console to support these requirements? A. single-context B. single deployment C. multiple deployment D. multi-instance Answer: D

  6. Practice PassQuestion 300-710 Training Questions ensure your 100% success Question 5 What is the benefit of selecting the trace option for packet capture? A. The option indicates whether the destination host responds through a different path B. The option limits the number of packets that are captured C. The option captures details of each packet D. The option indicates whether the packet was dropped or successful Answer: B

  7. Practice PassQuestion 300-710 Training Questions ensure your 100% success Question 6 An engineer is setting up a new Firepower deployment and is looking at the default FMC policies to start the implementation. During the initial trial phase, the organization wants to test some common Snort rules while still allowing the majority of network traffic to pass. Which default policy should be used? A. Security Over Connectivity B. Maximum Detection C. Balanced Security and Connectivity D. Connectivity Over Security Answer: C

  8. Practice PassQuestion 300-710 Training Questions ensure your 100% success Question 7 Which two types of objects are reusable and supported by Cisco FMC? (Choose two) A. reputation-based objects, such as URL categories B. dynamic key mapping objects that help ink HTTP and HTTPS GET requests to Layer 7 application protocols C. reputation-based objects that represent Security Intelligence feeds and lists, application filers based on category and reputation, and file lists D. network-based objects that represent FODN mappings and networks, port/protocol pairs,VXLAN tags, security zones, and origin/destination country E. network-based objects that represent IP addresses and networks, port/protocol pairs,VLAN tags, security zones, and origin/destination country Answer: CE

  9. Practice PassQuestion 300-710 Training Questions ensure your 100% success Question 8 An engineer is configuring a Cisco FTD appliance in IPS-only mode and needs to utilize fail-to-wire interfaces. Which interface mode should be used to meet these requirements? A. inline set B. passive C. routed D. transparent Answer: A

  10. Practice PassQuestion 300-710 Training Questions ensure your 100% success Question 9 An organization has noticed that malware was downloaded from a website that does not currently have a known bad reputation. How will this issue be addressed globally in the quickest way possible and with the least amount of impact? A. by denying outbound web access B. by creating a URL object in the policy to block the website C. by isolating the endpoint D. Cisco Talos will automatically update the polices. Answer: D

  11. Practice PassQuestion 300-710 Training Questions ensure your 100% success Question 10 Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD? (Choose two.) A. virtual link B. area boundary router type1 LSA filtering C. MD5 authentication to OSPF packets D. SHA authentication to OSPF packets E. OSPFV2 with IPv6 capabilities Answer: AC

More Related