1 / 11

2021 Cisco CCNP Data Center 300-610 Updated Questions

PassQuestion provides the latest 2021 Cisco CCNP Data Center 300-610 Updated Questions which include the latest questions and vertified answers to help you in clearing all of your doubts.

examquestionsonline
Download Presentation

2021 Cisco CCNP Data Center 300-610 Updated Questions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 300-610 Training Questions Designing Cisco Data Center Infrastructure (DCID) https://www.passquestion.com/300-610.html

  2. Practice PassQuestion 300-610 Training Questions ensure your 100% success Question 1 An engineer must connect an existing Cisco Fabric Interconnect to an IP-based storage array. The connection be a channel made directly between the fabric interconnect expansion module and the storage array. The engineer must also consider that the environment is running FCoE for storage and uses QoS to prioritize traffic. Which port type should be used to meet these requirements? A. Network B. Uplink C. Appliance D. server Answer: B

  3. Practice PassQuestion 300-610 Training Questions ensure your 100% success Question 2 A network architect must design a large-scale Cisco SAN topology. The customer has a limited budget, so a design that provides use of resources is required. To support this requirement, the architect to share array ports, ISL, and line card bandwidth. The customer has also presented these additional considerations: ✑ The customers plans to expand the network by 10% over the next two years. ✑ The customer’s policy requires physically separated infrastructure to support high availability. Which solution should be used to meet these requirements? A. Collapsed-core B. Mesh C. Core-edge D. Edge-core-edge Answer: C

  4. Practice PassQuestion 300-610 Training Questions ensure your 100% success Question 3 What are two reasons to select OTV as the DCI solution to connect multisite topologies? (Choose two.) A. It propagates hosts reachability without support of traffic flooding. B. Layer 3 failures do not propagate beyond the OTV edge device. C. It extends the spanning tree between data centers. D. It is an open standard. E. It constrains HSRP hello messages to each data center. Answer: AB

  5. Practice PassQuestion 300-610 Training Questions ensure your 100% success Question 4 An engineer Installs a B-Series server in a Cisco UCS chassis that contains a pair of UCS-IOM-2208XP I/O modules. The full bandwidth of the I/O module must be utilized. Which two elements should be used in this environment? (Choose two.) A. eight twinax cables from each I/O module to each fabric interconnect B. four twinax cables from each I/O module to each fabric Interconnect C. Cisco UCS VIC 1225 D. Cisco UCS M81KR E. Cisco UCS VIC 1280 Answer: A,D

  6. Practice PassQuestion 300-610 Training Questions ensure your 100% success Question 5 Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented? A. VSS that has unified uplinks B. Ethernet and unified ports on the same port channel C. vPC that has unified uplinks D. cross-connections with pinning Answer: D

  7. Practice PassQuestion 300-610 Training Questions ensure your 100% success Question 6 Which two naming formats identify target or initiator iSCSI nodes? (Choose two.) A. WWPN B. EUI C. IQN D. WWN E. OUI Answer: BC

  8. Practice PassQuestion 300-610 Training Questions ensure your 100% success Question 7 Which type fields can an engineer use to identify an iSCSI participant? (Choose two.) A. type B. preshared key C. port number D. identifying tag E. hostname Answer: C,E

  9. Practice PassQuestion 300-610 Training Questions ensure your 100% success Question 8 An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled? A. IP redirects B. flow control C. proxy ARP D. HSRP Answer: C

  10. Practice PassQuestion 300-610 Training Questions ensure your 100% success Question 9 An engineer is expanding an existing ISCSI environment and must choose an addressing scheme. When checking one of the devices, the engineer discovers this target device naming used {prefix}. 2019-01.com.acme.123:00. ftd0cb21.bcb389458389 Which addressing scheme was used in the environment? A. Extended Unique identifier B. Fibre Channel ID C. ISCSI Qualified Name D. Network Address Authority Answer: C

  11. Practice PassQuestion 300-610 Training Questions ensure your 100% success Question 10 Which approach splits a pair of clustered fabric interconnects into two standalone devices? A. Run the disable fips-mode command on each fabric interconnect. B. Run the connect local-management command on each fabric interconnect. C. Erase the configuration of both fabric interconnects. D. Unplug the Layer 1 and Layer 2 interfaces between the devices. Answer: C

More Related