1 / 14

The following 10 slides represent a Sample Preview from this Training Presentation

The following 10 slides represent a Sample Preview from this Training Presentation. The complete “OSHA 600” based PowerPoint Presentation is available for subscribers to EH&S Manager Online . SPRAY FINISHING. Introduction.

everett
Download Presentation

The following 10 slides represent a Sample Preview from this Training Presentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The following 10 slides represent a Sample Preview from this Training Presentation The complete “OSHA 600” based PowerPoint Presentation is available for subscribers to EH&S Manager Online. © 2003 Seton Identification Products

  2. SPRAY FINISHING

  3. Introduction • 29 CFR 1910.107, "Spray Finishing Using Flammable and Combustible Materials", is based on the National Fire Protection Association's, "Spray Finishing Using Flammable and Combustible Materials", manual, 1969 edition. • Many technological changes have occurred in the field of spray finishing since the 1969 edition was published. © 2003 Seton Identification Products

  4. Introduction • The current edition of NFPA 33 is entitled "Spray Application Using Flammable and Combustible Materials". It recognizes the hazards inherent to more current operations such as spray-up molding (e.g., fiberglass). © 2003 Seton Identification Products

  5. Introduction • This module applies to flammable and combustible finishing materials when applied as a spray by: • Compressed air • "Airless" or "hydraulic atomization" • Steam • Electrostatic methods • Any other means in continuous or intermittent processes. © 2003 Seton Identification Products

  6. Introduction • Spray Finishing also covers the application of combustible powders by powder spray guns, electrostatic powder spray guns, fluidized beds, and electrostatic fluidized beds. • This module does not apply to outdoor spray application of buildings, tanks, or other similar structures, nor to small portable spraying apparatus not used repeatedly in the same location. • In these situations, there would be lesser chance of combustible residue buildup and greater chance of atmospheric dilution of flammable vapors. © 2003 Seton Identification Products

  7. Introduction • The Spray Finishing module covers the following sections: • Critical Concepts • Spray Booths • Electrical and Other Ignition Sources • Ventilation • Flammable and Combustible Liquids • Fire Protection • Operations and Maintenance © 2003 Seton Identification Products

  8. Introduction • Operations and Maintenance • Fixed Electrostatic Apparatus • Electrostatic Hand Spraying Equipment • Drying, Curing, or Fusion Apparatus • Powder Coatings • Organic Peroxides and Dual Component Coatings. © 2003 Seton Identification Products

  9. Objectives • At the end of this Spray Finishing module, you should be able to: • Identify and define critical terms related to spray finishing • Understand the construction and safety requirements related to spray booths, spray rooms, hand spraying, and other techniques • Understand requirements for storage and handling of flammable and combustible liquids used in spray finishing • Identify critical factors influencing operation and maintenance • Identify and define the various techniques of spray finishing discussed in this module. © 2003 Seton Identification Products

  10. Critical Concepts • In order to better understand spray finishing principles, it is helpful to understand some critical concepts. These concepts are listed below. • Click on each term to learn more. • Spray Area • Spray Room • Spray Booth • Dry-Spray Booth © 2003 Seton Identification Products

  11. Critical Concepts • The spray area concept is more complex and, therefore, deserves to be explained in detail. In general, a spray area is any area in which dangerous quantities of flammable vapors or mists, or combustible residues, dusts, or deposits are present due to the operation of a spraying process. • The current edition of NFPA 33 offers greater insight into the meaning of the spray area. © 2003 Seton Identification Products

  12. Thank you for previewing our PowerPoint Training Presentation! As a subscriber to EH&S Manager Online, you'll get full access to all of our ready-to-use, customizable PowerPoint Presentations.

  13. 30-Day Risk-FREE Guarantee! • We're confident that you won't find a better one-source compliance solution at this low price. If you're not satisfied with your purchase, simply call us within 30 days for a full refund or credit. © 2003 Seton Identification Products

  14. INTRODUCTORY OFFER! SAVE $100! • Just enter coupon code T272 in the coupon box when you pay online and you'll save $100! Join Now! Click Banner > © 2003 Seton Identification Products

More Related