1 / 16

2010 NSF REU Summer Program

Hydrodynamics of Drop Impact and Spray Cooling through Nanofiber Mats. Yung Chan , Suman Sinha Ray and Alexander L. Yarin Micro/Nanoscale Fluid Transport Laboratory Engineering Research Facility Room 1014 University of Illinois at Chicago, IL 60612. 2010 NSF REU Summer Program. Outline.

evan
Download Presentation

2010 NSF REU Summer Program

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Hydrodynamics of Drop Impact and Spray Cooling through Nanofiber Mats Yung Chan , Suman Sinha Ray and Alexander L. Yarin Micro/Nanoscale Fluid Transport Laboratory Engineering Research Facility Room 1014 University of Illinois at Chicago, IL 60612 2010 NSF REU Summer Program

  2. Outline • Acknowledgement • Introduction • Applications • Experiments • Results and Discussions • Conclusion • Reference 7/29/2010 UIC-REU

  3. Acknowledgement • Financial support from the National Science Foundation and Department of Defense, EEC-NSF Grant #0755115 • Additional financial support from CMMI-NSF Grant #1016002 • Research Opportunity provided by University of Illinois at Chicago (UIC) • REU organizers: Professor Takoudis Professor Jursich • Advisor: Professor Yarin • Mentor: SumanSinha Ray Alex Kolbaso, Yiyun Zhang and FadyCharbel 7/29/2010 UIC-REU

  4. Introduction • Drop impacts on dry surface exhibit more complicated flow patterns than those on the wetted surfaces Six possible outcomes of drop impacts on a dry surface • Drop impact on dry surface is a key element of a wide variety of phenomena encountered in many technical applications, including spray printing, rapid spray cooling of hot surface, ice accumulation on power lines and aircrafts 7/29/2010 UIC-REU

  5. Applications • Spray cooling can be used to transfer large amounts of energy through the latent heat of evaporation, heat transfer rate much higher than pool boiling since the drop can be removed heat from surface more easily. • Water Spray Cooling: extremely high heat transfer (L= 2260J/g) cooling microelectronic chips , radiological elements and server room. • Semiconducting diamond devices works up to temperatures of 500 °C, and silicon devices fail at around 150 °C Coating that can increase the interface Use minimum amount of water to transfer maximum heat from device in shorter time. 7/29/2010 UIC-REU

  6. Experiment- Nanofiber Mat Coating • Electrospinning is a process that produces continuous polymer fibers through the action of an external electric field imposed on a polymer solution. • Primary characteristic of nanofibers is the high ratio of surface area to mass . • Then polymer fiber distributed on the grounded plate • PAN (Poly-acrylonitrile) is a resinous, fibrous, and rubbery organic polymer. 7/29/2010 UIC-REU

  7. Experiment-set up 7/29/2010 UIC-REU

  8. Experiment Copper Substrate at 200 C Copper Nanofiber Mat at 200C 7/29/2010 UIC-REU

  9. Result and Discussion-1 • In room temperature 7/29/2010 UIC-REU

  10. Result and Discussion-2 • In room temperature 7/29/2010 UIC-REU

  11. Result and Discussion-3 7/29/2010 UIC-REU

  12. Result and Discussion-4 7/29/2010 UIC-REU

  13. Result and Discussion-5 7/29/2010 UIC-REU

  14. Conclusion • Nanofiber mat coating: Silver > Copper > Nickel > PAN • Based on cost and heat flux rate: Copper nanofiber mat is the best coating. • Copper nanofiber mat: high thermal conductivity high interface between water and hot surface • Copper nanofiber coating may lead to a breakthrough in the development of a new generation of spray cooling process. 7/29/2010 UIC-REU

  15. Reference • Alexander L. Yarin, “Drop Impact Dynamics: Splashing, Spreading, Receding, Bouncing…” Annual Review of Fluid Mechanics, Vol. 38, pp.159-192, Jan. 2006. • Darrel l H. Reneker, and Alexander L. Yarin, “Electrospinning jets and polymer nanofibers” Polymer, Vol. 49, pp.2387-2425, Feb. 2008. • Andreas N. Lembach, Yiyun Zhang, and Alexander L. Yarin, “Drop Impact, Spreding, Splashing, and Penetration into Electrospun Nanofiber Mats” Langmuir Article, Vol. 26, pp.9516-9523, Feb. 2010. • R. Srikar, A.L. Yarin, “ Nanofiber coating of surfaces for intensification of drop or spray impact cooling” International Journal of Heat and Mass Transfer, Vol. 52, pp.5814-5826, Sept. 2009. 7/29/2010 UIC-REU

  16. Questions?Thank you for your attention! 7/29/2010 UIC-REU

More Related