1 / 35

R&TTE Directive Access to the EU Market

R&TTE Directive Access to the EU Market. R&TTE. Introduction The R&TTE Directive Conclusion. Introduction (1). Sector are rapidly globalising mobile communications: GSM, IMT-2000 Short range radio devices: IEEE 802.11, Bluetooth Wired communication: xDSL , modem technologies

eron
Download Presentation

R&TTE Directive Access to the EU Market

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. R&TTE Directive Access to the EU Market

  2. R&TTE • Introduction • The R&TTE Directive • Conclusion

  3. Introduction (1) • Sector are rapidly globalising • mobile communications: GSM, IMT-2000 • Short range radio devices: IEEE 802.11, Bluetooth • Wired communication: xDSL, modem technologies • Globalisation forces regulatory reform: • Wealth of technical regulation around the world hampers trade • Diverging administrative provisions • Diverging technical requirements • Diverging conformity assessment procedures • Regulators need to address non-tariff barriers • Rethink the proportionality of existing regimes

  4. Introduction (2) • The EU has a lot of experience to share • Single market forced the EU to resolve internal barriers • Although still imperfect most of the barriers have been removed • Customs Union • No import/export tariffs • No need for local establishment • Started in 1986 to address barriers caused by conformity assessment in EMC and R&TTE sectors • 1986: Exchange of test reports for TTE (86/361/EEC) • 1989: EMC Directive (89/336/EEC) • 1991: Mutual Recognition of approvals for TTE (91/263/EEC) • 1999: Deregulation: R&TTE Directive (1999/5/EC)

  5. Introduction (3) • The EU experience and conclusions: • The market players are the prime responsible: build your legal system on this • Rely on horizontal liability and consumer protection • A priori type approval regimes are an overkill to manage the risks caused by electronic, electrical and R&TTE products • Mutual Recognition Agreements are only 2nd best, cost/benefit not always clear: Deregulate first • It costs a lot of energy to reform legacy approval infrastructures • Continue policy on unbundling terminal and service provision The R&TTE and EMC Directives

  6. R&TTE • Introduction • The R&TTE Directive • Market in Europe • Philosophy • Details • Implementation • International aspects • Conclusion The R&TTE and EMC Directives

  7. EU market • Total sectors covered by EMCD: >250 b€ • R&TTE equipment: >30 b € /year (2005) • Machinery market: >250 b € /year • Telecommunication Services: >250 b € /year • Diverse industry • The Big Boys (Nokia, Ericsson, Motorola, Siemens, Philips, Alcatel, Nortel) • Many SMEs in e.g. Short Range Radio markets • Before R&TTE Directive: highly fragmented • > 1000 national regulations, around 30 harmonised EU regulations • fragmentation of spectrum • After R&TTE Directive: less fragmented • fragmentation of spectrum The R&TTE and EMC Directives

  8. Philosophy (1) • Scope R&TTE: terminal equipment + all radio equipment (harmonised and non-harmonised frequency bands) with some minor exceptions • Scope EMC: electrical equipment causing EMC disturbance • No further national approval regulations • but remember: the R&TTE Directive will NOT harmonise spectrum use! • Community principles applied: free movement unless a MS has good reasons to bar products (notably radio) • New approach Directives: • requirements are legal, not technical • technical translation of requirements delegated to the market through ETSI • voluntary standards giving presumption of conformity • Safeguards for protecting spectrum The R&TTE and EMC Directives

  9. Philosophy (2) • No ex ante market access controls on R&TTE and Electrical products • ex post market surveillance to deal with incompliant products • market self regulation • liberalisation of testing market: no accreditation of test houses required! • Redefinition of role of equipment regulation in addressing the public interest • Less protection for networks • Leave technical details to the market players and voluntary standardisation • Obligation on operators to publish their interfaces • Liability for products and consumer protection laws deterrent • Relies on market surveillance The R&TTE and EMC Directives

  10. Details (overview) • Which legislation applies to a product? • Which requirements does a product need to meet? • What standards are available? • What conformity assessment procedure to follow • What are the other administrative provisions to comply with? • Notification obligations • User information • Marking The R&TTE and EMC Directives

  11. Details (Applicable legislation) • What has changed with the R&TTE Directive? • Before: mixed structure of EU and national rules Technically harmonised TTE (91/263/EEC) Satellite Earth Stations (93/97/EEC) DA national regulations DE national regulations EL national regulations ES national regulations FR national regulations IE national regulations UK national regulations etc. EMCD Electromagnetic compatibility (89/336/EEC) (2004/108/EC) LowVoltage D (Electrical safety requirements) (73/23/EEC) (2006/95/EC) The R&TTE and EMC Directives

  12. Details (Applicable legislation 2) • After: single market with national spectrums • defining new rules for the placing on the market and putting into service of Radio and Telecommunications Terminal Equipment; • R&TTE is safe and does not disturb radio services or other equipment; • lower requirements; • complete coverage of the sector • the R&TTE is one of the few high-tech sectors in which the EU industry has a globally leading position in certain sub-sectors; The R&TTE and EMC Directives

  13. Details (Requirements 1) • Protection requirements of the EMC Directive: • Limited your emissions • Be immune to those emissions • How to meet those requirements? • Comply with harmonised standards • Obtain a competent body report The R&TTE and EMC Directives

  14. Details (Requirements 2) Decisions on application for: maritime equipment inland waterways avalanche beacons • Essential requirements of the R&TTE Directive: • Electrical Safety and health (as in Low Voltage Directive, 73/23/EEC), • ElectroMagnetic Compatibility (as in EMC Directive, 89/336/EEC) • Spectrum use (effective use so as to avoid harmful interference) • possibility to define some additional public interest requirements: • End-to-end interworking • No network harm • privacy protection • avoidance fraud • access emergency services • Features for the disabled • Needs to operate properly in nationally defined radio spectrum (access via R&TTE website) The R&TTE and EMC Directives

  15. Details (Requirements 3) • How to meet radio requirements? • Member States have to publish the rules for accessing the spectrum (Art.4.1). High level description of intended transmissions: • frequency band, transmission power, channel spacing etc. • R&TTE Essential requirements to ensure that other users of the spectrum are not disturbed (non-intended transmissions): • spurious emissions, out of band transmission etc. • Where Harmonised Standard is available it provides the easiest route to market • Usability in a Member State can only be declared if equipment abides by the national frequency plan The R&TTE and EMC Directives

  16. Details (Requirements 4) • How to meet the requirements for wired telecommunication equipment? • Level of regulation will be reduced but this doesn’t guarantee interworking: • no physical harm to the network or disturbances • no further telecommunication specific requirements • Similar depth of regulation as e.g. US FCC Part 68 • To ensure interworking, operators have to publish the characteristics of their interfaces (Article 4.2), in their own interest to be complete, so that products don’t cause problems The R&TTE and EMC Directives

  17. Details (Harmonised standards 1) • Technical interpretation of the essential requirements delegated to standardisation • The European Commission, after consultation of the Member States, formally asks the development of standards interpreting the essential requirements of the Directive • 3 recognised European Standardisation Organisations: • CEN (not active in R&TTE area, a few EMC standards) • CENELEC (Safety standards, including RF hazards, EMC standards) • ETSI (Radio standards, EMC standards for R&TTE) The R&TTE and EMC Directives

  18. Details (Harmonised standards 2) • Harmonised standards are (to the extent possible) technology neutral • Delegation to private bodies of such standards requires full transparent procedures: • A Decision on a work item is taken (in ETSI 4 Members is sufficient) • Technical Committee drafts standard • Draft standard goes for public enquiry • Standard is formally voted upon (weighted national vote) • The Directive provides for safeguards against faulty standards The R&TTE and EMC Directives

  19. Details (Harmonised standards 3) • Article 3.1.a R&TTE: Most important Safety standards (published both under the R&TTE and the LV Directive): • EN 41003 Particular safety requirements for equipment to be connected to telecommunications networks • EN 50083-1 Cabled distribution systems for television and sound signals. Part 1: Safety requirements • EN 60065 Audio, video and similar electronic apparatus: Safety requirements • EN 60215 Safety requirements for radio transmitting equipment • EN 60825 Safety of laser products: Part 1: Equipment classification, requirements and user's guide and Part 2: Safety of optical fibre communications systems • EN 60950 Safety of information technology equipment, including electrical business equipment • Harmonised Standards for Electromagnetic Fields • EN50360 & EN50361 for handsets The R&TTE and EMC Directives

  20. Details (Harmonised standards 4) • Article 3.1.b R&TTE and Article 4 EMC: R&TTE and EMC list always published together. R&TTE EMC standards in R&TTE list, the others in the EMC list • Article 3.2 R&TTE: Initial set of standards to quickly respond to the Directive. Will progressively be rationalised • Article 3.3: Notably standards expected for maritime safety • Latest list always accessible from R&TTE and EMC websites The R&TTE and EMC Directives

  21. Placing in the Market • Article 6 • Inhibits MS from imposing additional requirements • Existing equipment can be continue to sold for period, which released some tensions directive could cause in some cases • Requires the supplier to provide certain information to the user • Spectrum usage notification is absolutely needed because Radio Spectrum planning has not been harmonised in the EU yet The R&TTE and EMC Directives

  22. Putting into service and right to connect • Article 7 • It is very typical situation in telecommunication when the end user very often is not purchasing the apparatus • Customer has right to be connected if apparatus complies with essential requirements • There is a reservation regarding spectrum • Safeguard for non-compliance with network The R&TTE and EMC Directives

  23. Free movement of apparatus • Article 8 • It is foreseen that RTT equipment that meets directive requirements may freely moved within the EU – but not put into service. • Trade fairs and exhibitions are typical events when Member States shall not create any barriers. The R&TTE and EMC Directives

  24. Safeguards • Article 9 • MS has a right to withdraw the apparatus from the marker and may restricts its free movement when it is proved that it does not comply with the RTTED • MS have to notify the Commission with appropriate explanation of reasons and measures (3 types of explanation) • Measures should be proportional to the problem The R&TTE and EMC Directives

  25. Details (Conformity assessment 1) • Main principle: • Manufacturer takes full responsibility and should test to reinsure himself • Technical file to be kept at the disposal of surveillance authorities for 10 years after last product has been marketed! • Exception (R&TTE): for radio transmitters, there are obligations to contact a notified body: • When harmonised standards don’t prescribe essential radio tests a NB prescribes (Annex III) • Where a product doesn’t follow harmonised standards: NB to give an opinion on these aspects in the technical file (Annex IV) • Exception (EMC): obligation to contact a competent body • When product doesn’t comply with a harmonised standard The R&TTE and EMC Directives

  26. Details (Conformity assessment 2) • Alternative to obligations to consult a Notified Body: Full Quality Assurance (Annex V) • Possibility to use LVD and EMC procedures • Manufacturers may VOLUNTARILY seek the opinion of a Notified Body on any aspect of their technical file The R&TTE and EMC Directives

  27. Flow chart of the procedure The R&TTE and EMC Directives

  28. Details (Administrative 1) • No administrative approval by the authorities is necessary anymore but certain radio products need to be notified to national spectrum authorities before being marketed (article 6.4) at least 4 weeks before marketing • Difference of opinion between MS on which products need to be notified • MS may go and test product in 4 week period as part of market surveillance The R&TTE and EMC Directives

  29. Details (Administrative 2) • How should a product be marked? • Article 4.1: Equivalence between interfaces and definition of equipment classes. Current application: 2 main classes subdivided in subclasses. • Class 1: equipment, which can freely move and be switched on in the Community (wired equipment, GSM, Receive-only equipment, etc.) • Class 2: equipment, for which this is not the case (transmitters, which are to be licensed) • Marking: simple marking scheme agreed between Member States: • CE mark only for class 1 equipment (+ NB Numbers) • CE mark + for class 2 equipment (+ NB Numbers) • Most radio products are class 2 (unfortunately)! • For EMC: CE mark only The R&TTE and EMC Directives

  30. Details (Administrative 3) • User information (R&TTE only) • Marking should go on the packaging • Marking should go in the user manual • Copy of the Declaration of Conformity to go in the manual • Too strict interpretation of article 6.3 would have led to unworkable situation: original DoC in 11 languages and signed • Compromise: Original DoC on web or otherwise available and generic statement on compliance in the manual • Manufacturer obliged to extensively inform the user of: • the intended use of equipment (notably to which network types it can be connected) • the geographic limitations (in which spectrum can it function) The R&TTE and EMC Directives

  31. The international agenda (1) • 3 Developments to address the globalisation of the R&TTE market: • Mutual Recognition Agreements (MRAs) on conformity assessment. • No harmonisation of the requirements but (part of) certification can be done abroad • EU with US, CDN, AUS, NZ, JPN • Framework agreements in the Americas (CITEL) and Asia-Pacific (APEC) • Deregulation: rather then overcoming barriers to trade, avoid them • R&TTE Directive (EU) • Revision Part 68 (US) • Regulatory reforms in AUS and NZ • Deregulation of conformity assessment not the complete story: administrative, customs and local establishment requirements are problematic, notably for smaller companies The R&TTE and EMC Directives

  32. The international agenda (2) • Regulatory convergence: regional agreements to harmonise product requirements • All EU Directives • EU Directives extended to 3rd countries (EEA, CH, HU,CZ,EE,SK,SL,Algeria?) • Non-reciprocal acceptance of products regulated in dominant markets (EU compliant, FCC compliant) • EU follows a policy to have MRAs with its main trading partners, whereas in parallel pushing deregulation and regulatory convergence: • With South-East Asia: Discussions on deregulation in ASEM context • With US: MRA implementation cumbersome, starting discussions on regulatory convergence in context of the Transatlantic Economic Partnership • With candidate Member States: regulatory convergence through PECAs • In ITA: discussions on deregulation as a tool for removing non-tariffs The R&TTE and EMC Directives

  33. EMC & R&TTE • Introduction • The EMC and R&TTE Directives • Conclusion The R&TTE and EMC Directives

  34. Conclusions • Europe has a lighter market access regime than its main trading partners and hence CABs are not involved in main stream standard products; • A main problem in Europe remains the lack of spectrum harmonisation. Manufacturers should carefully inform themselves about that; • Less ex ante more ex post: We are setting up an efficient surveillance infrastructure; • Public authorities will leave more to the market: markets should not fail to take their responsibility • We need to address the global picture however as well, notably in the interest of smaller companies The R&TTE and EMC Directives

  35. For questions and suggestions: consulnet@consulnet.com.pl or jaroslaw.tworog@kigeit.pl The R&TTE and EMC Directives

More Related