About the product “Kratasol” is used for reception of high-flow structural and cast concrete mixes with the improved viability and concrete of classes on strength up to В50 inclusive. Superplasticizer “Kratasol” is used in manufacture of high-strength concrete, heavy- and light-weight
Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.
“Kratasol” is used for reception of high-flow structural and cast
concrete mixes with the improved viability and concrete of classes on
strength up to В50 inclusive. Superplasticizer “Kratasol” is used in
manufacture of high-strength concrete, heavy- and light-weight
concretes, for the production of precast constructions, pressure-tight
reinforced-concrete pipes, prefabricated constructions of high-strength
concrete; for the production of densely clad constructions (like frames,
beams, columns and frameworks of bridges), reinforced-concrete
products (flags and panels in mold batteries, on circulate-aggregate and
conveyer lines), in building of main constructions of monolith
structures with high level of reinforcement and complex configuration,
in manufacture of plant-mixed concrete, manufacturing of concrete
floors and coverings with high operational properties.
- for water-reduced concrete mixes – by 50% and more
- for plasticized concrete mixes – by 10% and more
Material – enameled or stainless steel
Size – 2-6 cubic meters Water
Anchor, frame or bilevel bladed
Type – centrifugal
Output – 20-25 cubic meters
Material – stainless steel
Heating the solution up to 30-50oC
1 – stainless device with bilevel mixer, bubbler for heating and temperature control sensor
2 – centrifugal pump
3 – loading funnel
4 – water or solution quantity sensor
The KE admixture was added to ensure frost resistance
Properties of concrete with Kratasol admixture, which was used for the concreting of blocking plate of the Begovaya street and Leningradskoye highway crossroad, Moscow, Russia.
Extract from the act of conducting comparative efficiency tests for Kratasol and other superplasticizers
* stratification of the sample, grasping of the solution
The tests were conducted at industrial concrete admixtures; concrete admixtures were prepared in laboratory mixer, the calculated amount of the admixture was later added manually.Test results are presented in the figure. Their analysis allows to make the following conclusions:1. Kratasol admixture has higher plasticizing ability when compared to analogue dosage of Admixture №1,22. Kratasol provides significantly better keeping quality characteristics of concrete in comparison with tested concrete admixture with various cement consumption.3. Kratasol has higher concrete strengths characteristics in comparison with theAdmixture №1,2
Kratasol recommended dosage is 0,2-0,6 % from dry cement
mass in dry (powder) admixture substance calculation, depending on
technology requirements and using conditions. It is added into
concrete mixer in liquid condition as water solution of concentration
32-34% or in powder condition.
Kratasol in powder condition quickly and completely dissolved in
usual water under normal conditions.
Shelf life for product in powder and liquid condition is 1 year from
the date of manufacturing.
JSC”Pigment” Montazhnikov,1, Tambov392681, RussiaTel: +7 (4752) 79-53-51
Tel/fax: +7 (4752) 71-13-98 firstname.lastname@example.org