Five Common Heating System Issues and Solutions

1. Has your furnace stopped working? These leading 5 furnace problems and their basic solutions might help to get it working. Having difficulty with your furnace? You're not alone. Luckily, many issues have easy DIY repairs. The primary step: Inspect whether your HVAC system has power. You don't desire to have a service tech concerned your house simply to turn a switch at the breaker box. If power isn't the problem, check other possible problems before calling for service. # 1 ISSUE: Thermostat isn't working. MOST LIKELY PERPETRATOR: If your heat isn't coming on at all, try altering the batteries in the thermostat, if it has batteries. While you're at it, provide the thermostat a great cleaning inside with a small paintbrush. You can also attempt to reboot it. With the thermostat set to Heat, turn the temperature to about 60º. Then, turn the breaker switch off for 30 seconds and turn it back on Still absolutely nothing? Hire a specialist. # 2 ISSUE: Unit not switching on. LIKELY PERPETRATOR: Check the emergency situation shutoff switch for the heater. It might be at the entrance to the heater closet, at the top of the basement stairs, or on the heater. It might have a red switch plate. if someone switched it off, the heater will not work. # 3 PROBLEM: Filthy filter LIKELY CULPRIT: Not swapping out an old filter can cause a host of issues, not to discuss increasing your energy expense. To guarantee your furnace does not work overtime, alter your filter every one to 2 months. Here's how: Turn off your furnace, find the filter, eliminate the old one (and bear in mind of the size), replace it and turn the heater back on. # 4 furnace maintenance toronto ISSUE: Furnace isn't firing up LIKELY PERPETRATOR: Does your furnace click as though it will switch on, but then go silent and never ever begin? If you've checked the power, checked the thermostat and changed the filter, the pilot burner or the ignition sensor is most likely the issue. To fix it, begin by switching off the gas to your furnace. Then eliminate the front panel and discover the igniter or ignition sensor, which is usually near the burners. Snap a photo of the sensor to remind you of how it's attached and then get rid of the ignition sensing unit. Rub it with steel wool to get rid of residue, taking care to not damage it. Then put it back exactly as you discovered it and change the panel prior to turning the gas back on. If you have any doubt about this project, play it safe and call in the pros. # 5 ISSUE: Heater keeps tripping the breaker

2. LIKELY PERPETRATOR: If your heating system keeps tripping the breaker or blowing the fuse when the heat begins, it's most likely an electrical issue. To keep you and your family safe, call in the pros to identify the cause. While many typical heater issues can be repaired without contacting the specialists, it is essential to have your furnace professionally serviced when a year, specifically if you're not comfortable carrying out a few of the required maintenance jobs yourself.