1 / 24

Joint LHC Machine-Experiments Meeting on Experiment Protection from Beam Failures

Joint LHC Machine-Experiments Meeting on Experiment Protection from Beam Failures. Summary and action list. D. Macina TS/LEA/INT. LEMIC 91. Machine protection at the LHC : ‘organization’.

elysia
Download Presentation

Joint LHC Machine-Experiments Meeting on Experiment Protection from Beam Failures

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Joint LHC Machine-Experiments Meeting on Experiment Protection from Beam Failures Summary and action list D. MacinaTS/LEA/INT LEMIC 91

  2. Machine protection at the LHC :‘organization’ • Machine protection activities of the LHC and the SPS are coordinated by the LHC Machine Protection Working Group (MPWG), co-chaired by R. Schmidt & J. Wenninger. • The MPWG WEB site (only from inside CERN !) • http://lhc-mpwg.web.cern.ch/lhc-mpwg/ • The detailed description of the commissioning of the LHC Machine Protection System and the record the test results is the mandate of the Commissioning of the MachineProtection System Sub-Working-Group. It reports to the LHCCWG. Web site: • http://lhccwg.web.cern.ch/lhccwg/MPS/mps.htm • New : • The MPWG has asked each LHC experiment to provide a contact person (BISU) to interface on machine protection issues between machine and experiments. Antonello Di Mauro(ALICE) Siegfried Wenig(ATLAS) Alick Macpherson(CMS) Richard Jacobsson(LHCb) Anne-Laure Perrot(LHCf) Mario Deile(TOTEM)

  3. Program

  4. Safe beam The MPWG has adopted for the LHC a limit for safe beams (nom. emittance) of 1012 protons at 450 GeV ( <~ Cu melting point) 1010 protons at 7 TeV (scaled from 450 GeV) - under discussion!! Standard procedure: if empty machine => inject pilot bunch (5x109 p) BUT it is technically possible to inject a safe beam into an empty machine (no interlock forbids it) If safe beams no injection protection required and, in case of circulating beam, absorbers and collimators at relaxed settings/not required. Safe beams are used for the fine tuning of the machine protection elements at each new fill. Some interlock may/will be masked IF and ONLY IF beam is safe

  5. Beam cleaning • The protons that are lost must be intercepted with very high efficiency before they can quench a superconducting magnet : collimation! • Unlike HERA, TEVATRON, RHIC.. the LHC cannot be operated without collimators (except at injection with low intensity). • At the LHC the collimators must define the aperture (primary + secondary) which has an important impact for MP : for most multi-turn failures the beam will hit collimators first !

  6. Machine Aperture ATLAS • Vertical axis : • Machine aperture in units of beam sigma (s), includingalignmenterrors and othertolerances. • Horizontal axis : • Longitudinal position on leftside of ATLAS (seenfrom the ring center). 450 GeV Arc • Injection : • Aperture limit is the LHC ARCs (~ 7-8 s). • The triplet magnets in front of ATLAS/CMS are slightly behind the ARC (~ 8-9 s). •  Collimators @ ~5-6 s ! 7 TeV, b* 0.5 m • Collisions, squeeze to b* 0.5 m : • Aperture limit is defined by the triplet magnets in front of ATLAS/CMS (~ 8 s).. •  Collimators @ ~6 s ! Triplet End of the squeeze (* < 6 m) bottleneck in the triplets => TCT needs to be closed 6 Experiments-Machine WS / June 07

  7. Additional general items • Software interlock • The reaction time of this system will be at the level of a few seconds. • The systems rely entirely on the machine technical network, databases, etc – clearly not as safe as HW systems ! • The Injection SIS will complement the Injection Interlock Systems: • - Active from the beginning. • - Stops injection through the Injection Interlock Systems. • -Receives the experiments injection inhibits, either through our middleware (preferred) or through DIP. • Post Mortem Analysis • All machine user systems connected to the LHC BIS must provide Post-Mortem informationfor diagnostics, even systems that have NOT triggered the dump. • To resume beam operation after a beam dump, the PM data must be analysed and ‘understood’

  8. Injection - Extraction • Same principle for injection and extraction: • “kicker” magnets: fast rise time →muchless than one turn, large (~ mrad) angles • septa: two(/more) apertures with different magnetic fields • Injection: • Beam 1: IR 2 • Beam 2: IR 8 • Extraction: • Both beams in IR 6 • Injection process and extraction process can lead to single turn beam loss!! => • Everything” required for injection/(extraction) plus the LHC ring must have the right value/state • Dedicated passive protection

  9. MKI Transfer line Q5 Q4 D2 MSI IP2 Injection overview • The injection septum MSI bends the beam into the LHC in the horizontal plane • The injection kicker MKI kicks the beam in the vertical plane onto the LHC orbit • Possible injection failures: • Wrong current setting in the transfer line magnets + injection septum, fast trip of power supply, failure of SPS extraction kicker (MKE) during extraction, fast trip of power supply – e.g. downstream of transfer line collimators (protection: current surveillance, fast current monitors, absorbers) • Injection kicker failures in the LHC => caught by DEDICATED MOVEABLE ABSORBER TDI behind kicker and auxiliary movable collimators TCLI in the injection regions

  10. Error settings at injection • Error settings at injection (empty machine) of D1/D2 and orbit correctors in the LSS may drive in beam in the experimental areas.It affects all experimental insertions. • Not possible to hit directly the detectors if only one failure considered (at least in IR1/IR5) Ex. MCBXH wrong settings (30-100%) nominal at injection is 5%

  11. Septum magnet deflecting the extracted beam MSD Beam 1 H-V kicker for painting the beam Beam Dump Block Q5L Q4L 15 kicker magnets MKD about 700 m Q4R about 500 m Q5R Beam 2 LHC Extraction (IR6) • Clean dump • Synchronisation: the kicker rise time must coincide with the particle free abort gap • Particle free abort gap • Energy Tracking – (required kick strength from the beam energy via magnet currents)

  12. Possible failures at extraction • Lost synchronisation with the abort gap • Pre-fire of one of the 15 kicker modules (hard-wired system triggers all remaining 14 in 0.7-1.3 µs ) • Frequency: once per year possible • Solution: dedicated passive protection; • TCDQ (movable) and TCS protect Q4 and general LHC apertures • TCDS protects the MSD septa • In case of problems during extraction coupled with TCDQ settings, orbit or optics errors, “some” beam loss at the tertiary collimators/triplets in IR5 may occur. • Difficult to quantify - detailed analysis ongoing. PhD thesis of Thomas Kramer, AB/BT. • If abort gap (re-)population => caught by TCDQ and interlocking on abort gap monitor signal

  13. Possible failures with circulating beam(magnet failures including operation mistakes) • Usually slow and detected first in the aperture restrictions of the machine (cleaning insertions) • Potential danger for the experiments (VELO and RP): uncontrolled closed bumps since they could affect only experimental areas. However: • Extremely difficult to create at 7 TeV (less difficult at 450 GeV) • They build up slowly: first losses seen by the BLMs and beam extraction before damage threshold • Only critical if combined with a fast failure => low probability

  14. Summary of machine failures • Errors/failures which may drive the beam into the experimental areas; • Settings errors at injection • Undetected closed bump & fast magnet failures (highly unprobable) • Errors/failures which may drive the beam in the aperture restrictions in the LSS: • Injection errors (IR2, IR8) • Asynchronous beam dump (IR5)

  15. Experiments (1) • ATLAS • BCM+ LUCID used for beam abort • Injection errors: ok for pilot bunch, concern for Safe Beam. What is the structure of Safe Beam? • Questions: mechanism for beam blow up at the IP? How loss of vacuum close to IP is treated? • ALICE • BCM used for beam dump (same system developed by LHCb). Position dictated by available space. Needs failures/error simulations to show the position is valid for the most relevant scenarios • Consequences of injection errors: old analysis. Still valid? • During injection: only BCM ON and possibly a few detectors at safe setting to monitor the losses in the experimental areas • Concern about Safe Beam

  16. Experiments (2) • CMS • BCM with standard LHC BLM Readout and Interface • Worry particularly about high rates of loss rather than integrated doses • Needed updated simulation (most realistic worst case scenario) for asynchronous beam dump and injection • IF BCM OFF (no protection system) => no beam allowed in the machine • IF CMS OFF but BCM ON => beam allowed • BCM and CIBU on machine power (no local UPS) • Concern about Safe Beam

  17. Experiments (3) • LHCb • BCM for beam dump. Readout front end same as BLMs • Entire BCM system under UPS • Concern On Safe Beam • Needs simulation for beam failures • LHCf • Beam dump based on the detector itself. All scintillators hit => beam dump • The experiment will run only for a few days per year: disconnected from the BIC when not in the TAN • The whole system is on ATLAS UPS • Scintillators always ON at injection

  18. Experiments (4) • TOTEM • T1 and T2 should be protected by the CMS system • RP: simulation for bunch hitting the pot: • For β*=1540 m only ok for bunch <= 6x1010 p • For β*=90-0.5 m beam wider, depends on number of bunches • TOTEM CIBU only used for the positioning of the RP. The other CIBU forced TRUE, may be used later

  19. Open issues and action list (1) • Safe Beam • This is a concern for all experiments. If not absolutely needed, experiments ask to lower to 1.1-1.5x1011 p. Is this OK or just a feeling? Can be simulated/calculated? • Action: MPWG • Post Mortem Data • Data from the experiments for all dumps • Experiments need PM Data from the Machine? • Details to be discussed • Action: AB/CO+ AB/OP + LEADE • Safe Beam Flag to the experiments • Technically all experiments can receive it via the GMT receiver • Only LHCb has requested it • Action: BISU

  20. Open issues and action list (2) • Injection inhibit • By SW: decide on protocol • New idea for HW with fiber-CIBU • Action: MPWG + AB/CO + LEADE • CIBU (and Protection System) Power • On UPS on two different power sources • Survive a power cut for 10 minutes • CMS philosophy: BCM must be ON whenever the machine is ON => machine power and not CMS power • Apply to all experiments? • Action: MPWG + LEADE + BISU

  21. Open issues and action list (3) • CMS Philosophy • No beam allowed if CMS protection system is OFF • Beam allowed if CMS not operational • Adopted by all experiments? • What is the reliability of the experiment’s protection system? Is it there a backup solution? • How many unjustified dump per experiments? • Aim for 1/year/exp? • Procedure after emergency beam dump • CMS request to latch their input until PM check is done. Check re-arm time scale Action?

  22. Open issues and action list (4) • How to detect direct hit in experimental area at injection if detector off? • Possible with BCM even if may be not always sufficient • A few additional detectors ON at safe settings? • Action: BISU • TCTs for 2008 • Missing Vertical TCT in IR2 and IR8. Is this a problem for small *? • Action: MPWG + Collimation WG • Bump scenarios and wrong settings at injection • Software Interlock surveillance of D1/D2/correctors in the experimental insertions at injection & collision • Action: SIS + MPWG

  23. Open issues and action list (5) • Abort gap monitor • Status + connection to BIC • Action: MPWG + AB/BI • Simulations • Asynchronous beam dump (including RP) => AB/BT • Consequences of the failure scenarios at injection => (AB/BT? TS/LEA? BISU?) • Error settings at injection (in particular IR2/IR8) => (TS/LEA?) • Additional failure scenarios when circulating beam (beam steering) => (AB/ABP?, AB/CO/MI??) • RP: simulations including mechanical stresses => (TS/LEA-MME?)

  24. To be done in addition… • Get more information and check consistency of the radiation damage threshold for similar detectors in different experiments • Better define the injection inhibit philosophy • Define/organize the test procedures • Define/organize the commissioning procedures together with the Commissioning of the Machine Protection System Sub-Working-Group

More Related