Washing Machine Repair /Contact Us @ www.a-1appliance.com
Washer Repairing Manual for Whirlpool or Kenmore Belt Drive The Design of Whirlpool / Kenmore Washer Belt Drive Contact Us @ www.a-1appliance.com
The design uses a single direction motor, with solenoids to engage and disengage the agitate and spin cycles and pump. Drive Train
The pin in the plunger rides in a different part of the cam bar slot than before . Since the wigwag is constantly moving back and forth, the pin will push the cam bar to a different position. Cam Bar Action
During the agitate cycle, the agitate solenoid energizes and pushes the agitate cam bar towards the front of the washer. Agitate Cycle
When the spin cycle is over, or when the washer lid is lifted, power is removed from the solenoid. The cam bar moves towards the front of the washer, pushing the clutch bar and yoke upwards. The clutch disengages and the brake engages, bringing the basket to a rapid stop. Spin Cycle
See figure for details about opening the cabinet and console. A wiring diagram is usually pasted to the back of the machine.
A-1 Appliance Parts Corporate Offices Address:11208 S. Memorial Pkwy, Suite GHuntsville, AL 35803 Toll-Free Phone: 1-800-841-0312Local: (256) 883-3211Fax: (256) 883-3220 General E-mail: email@example.com