1 / 91

BM3 STUDY GUIDE By SN Jamison Burkett

BM3 STUDY GUIDE By SN Jamison Burkett. What form is used when ordering new publications?. CG-4428. How do you request an allowance change for a publication. CG-5323. Where would the form for unit authorization changes be found?.

elina
Download Presentation

BM3 STUDY GUIDE By SN Jamison Burkett

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. BM3 STUDY GUIDEBy SN Jamison Burkett

  2. What form is used when ordering new publications? CG-4428

  3. How do you request an allowance change for a publication • CG-5323

  4. Where would the form for unit authorization changes be found? • It is available on CG Standard Workstation II, in Forms Plus, and CG Standard Workstation III, in Jet Form Filler.

  5. What is the DPRI? Directives, Publications, and Reports Index

  6. What is the SDL Standard Distribution List

  7. What kind of information can be obtained from the SDL? Current unit address, phone number, and OPFAC for the entire coast guard Units Distribution Symbol Instruction for correspondence and handling

  8. What are the second and third chapters of the DPRI Chapter 2 – Directives and Publications listed numerically Chapter 3 – Directives and Publications listed alphabetically

  9. Where can you find the latest revision to a publication • DDPRI Chapter 3

  10. Where can you find your units distribution symbol block for a publication? On the bottom of the cover page of the publication

  11. What info will be addressed in the distribution blocks? Unit authorization and allowance

  12. How do you locate your units distribution symbol? Look at table of contents page 1 of SDL

  13. In what publication would you find a listing of charts and publications required for your cutter? • CCOMDTINST M3140.5

  14. If the directive you are requesting is classified where do you send a letter requesting it? Sponsoring office at CGHQ

  15. What are the three basic changes to publications? Pen and Ink Cut and Paste Page for Page

  16. How can changes and ammendments to publications come? • CCD-Rom • Via a link to an internet site • Official messageChange directive or notice

  17. What is a SSIC? Standard Subject Identification Code Example : 16114.5B

  18. What do these mean: CI, CIM, CP, CN, U, F, C, S, T? • CCI – COMDNTINST • CIM – COMDNTINST MANUAL • CP – COMDNT PUBLICATION • CN – COMDNT NOTE • U – UNCLASSIFIED • F – FOR OFFICIAL USE ONLY • C – CLASSIFIED • S – SECRET • T – TOP SECRET

  19. What is a keel? The keel is the backbone of a vessel running from bow to stern along the center line of the hull.

  20. What are the two most common types of keels on metal boats? Bar Keel Flat Plate Keel

  21. What are the three basic types of hulls? Displacement Semi-displacement Planing

  22. What type of hull is the 47MLB? Deep V Planing

  23. What does amidships mean? It means the center or middle area of a vessel; the point where the center line and beam line meet.

  24. What does athwartships mean? A direction that runs from side to side. Example; Athwartships passageway or Athwartships bulkhead

  25. What is a vessels tendency to return to the upright position know as? Stability

  26. What are the two types of stability? Transverse Longitudinal

  27. What are the two primary forces that determine stability? Weight Buoyancy

  28. What are the two forces that affect stability? Static Dynamic

  29. What temp must an anti-exposure suit be worn? When the water is below 60 and above 50.

  30. What type of pfd is a anti-exposure suit? Type V

  31. When must a dry suit be worn? When the water temp is below 50 and the air temp is below 50.

  32. What are the three main factors that determine how long a person can survive in cold water? Temp of water Physical condition of PIW Actions taken by PIW

  33. What degree of arc does each light shine: Port, Stbd, Mast, Stern? Port and Stbd – 112.5 Mast 225 Stern 135

  34. How high does the MK 80 pencil flare go? 250-650’

  35. What color is the night end of a MK 124? Red

  36. How long does it take to acquire night vision? 30 min.

  37. Who reviews unit logs after they are completed? QMOW-OOD-OPS/NAV-CO

  38. Who can make corrections to a log after the CO signs it? Nobody

  39. What are the different readiness conditions? V – In port or at anchor IV – Normal peacetime steaming III – GQ, 1 in 3 manning II - GQ, port/stbd manning I – GQ, all hands manning

  40. How many hours before getting underway is the typical navigational briefing? 24 hrs

  41. Where can you find the requirements of cutters before getting underway? Coast Guard Navigational Standards Manual

  42. What does right/left standard rudder mean? Turn the rudder 20 degrees

  43. What does ease your rudder mean? Decrease rudder angle by half

  44. What type of cloud is also known as the mackerel sky? Cirrocumulus

  45. What type of cloud is low flying around 1000’ and uniform? Stratus

  46. At what depth do hydro static releases release? 5-15’

  47. How often are Hydro Static releases to be inspected? Annually

  48. How often are stokes litters required to be washed down if stored on weather decks? Weekly

  49. How often are stokes litters to be inspected? • Quarterly • Or after each use

  50. Explain a NIMA stock number for a chart? Example 14BHA14263 14-Geographic sub-region B-portfolio HA-type of chart 14263-chart number

More Related