1 / 31

MC68HC11 System Overview

MC68HC11 System Overview. MC68HC11 System Overview. System block diagram (A8 version). 68HC11: major features. HCMOS Technology (low power / high speed) On-chip RAM, ROM, EEPROM Basic core functions of MC6801 --improved instruction set functionality

edmund
Download Presentation

MC68HC11 System Overview

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MC68HC11System Overview

  2. MC68HC11System Overview System block diagram (A8 version)

  3. 68HC11: major features • HCMOS Technology (low power / high speed) • On-chip RAM, ROM, EEPROM • Basic core functions of MC6801 --improved instruction set functionality • 2 operating modes and 2 test modes • On-chip counter / timer • On-chip analog-to-digital conversion • On-chip parallel and serial ports • Improved interrupt capabilities than earlier products • supports 21 interrupt vectors • Some fault detection capability for major errors • (power, illegal instruction, hung processor)

  4. 68HC11: major features • Available in at least 25 different versions – Different pin counts and packaging – Different amounts/types of memory » RAM size (192 to 1.25K bytes) » ROM size (4K to 32K bytes) » EEPROM (512 to 2K bytes) » ROM, EPROM, or EEPROM program memory Memory maps vary from version to version! – Different I/O capabilities (number of timers, chip selects, DMA channels, A/D types, etc.) CONTD

  5. 68HC11: major features • Our textbook generally discusses the 68HC11A8 version, but we use the 68HC11E9 in the lab – A8: 256 bytes RAM 8 KB ROM 512 bytes EEPROM – E9: 512 bytes RAM 12 KB ROM 512 bytes EEPROM

  6. 68HC11: major features

  7. Pin assignments • Basic support pins • – Vdd, Vss: power (+5V) and ground • – Xtal, Extal: crystal connection for internal oscillator • – E: "enable" clock output signal (input freq ÷ 4) • – Reset*: external reset; system failure indicator • – IRQ*, XIRQ*: interrupt request lines • – MODA, MODB: specifies operating mode CONTD

  8. Pin assignments Port functions (in addition to parallel I/O) – Port A: timer functions – Port B: strobed outputs, expanded mode address (high byte) – Port C: parallel I/O, expanded mode address (low byte) and data – Port D: general serial I/O pins, handshake lines for expanded mode – Port E: A/D conversion

  9. Modes of operation • The chip has • 2 “operating” modes and • 2 “test” modes • Mode determination: • – On reset or power up, the mode is selected by values on pins MODA and MODB • » Jumpers J3 and J4 on EVBU trainer kit • – During operation, mode can be changed in some cases by writing to the HPRIO register

  10. 2 “operating” modes • Single chip (MODA=0, MODB=1) • – No external address and data bus functions • » CPU can only access on-chip memory • – Ports B and C are general purpose parallel I/O • – All software needed to control MCU must be in internal memory • – On reset, execution begins at address $E000 • » Located in ROM • » For EVBU version, checks jumper J2, may jump to $B600 (EEPROM) CONTD

  11. 2 “operating” modes • Expanded multiplexed (MODA=MODB=1) – External memory and peripheral devices can be accessed by time-multiplexed address-data bus – Port B used for high byte of address (output) – Port C provides low byte of address (output) and 8- bit data (bi-directional) – External address latch is required – Execution begins at address $E000 » Just as in single-chip mode, jumper J2 can be used to have the program jump to address $B600

  12. 2 “test” modes • Special bootstrap (MODA=MODB=0) • – On power up or reset, the program in the bootstrap ROM is executed • – CPU waits for a 256-byte program segment to be downloaded through the serial link and stored starting at address $0000 • – Execution then begins at address $0000 • – Permits wide variety of programs to be downloaded CONTD

  13. 2 “test” modes • Special test (MODA=1, MODB=0) – Primarily a testing mode for the manufacturer – Overrides some automatic protection mechanisms -- risky!

  14. On-chip memory • ROM (12K bytes) • – Factory programmed • – Special bootstrap ROM • RAM (512 bytes) • – Data, stack • – Can be used for downloaded code • – Low-power standby mode • EEPROM (512 bytes) • – Programmed and erased on-chip • – Calibration storage, diagnostic log, critical data logging, security data • – Can also be used for downloaded code CONTD

  15. Off-chip memory • EPROM • – For prototype development • – Windowed and one-time programmable versions

  16. Memory maps • Different versions of the HC11 have different memory maps: type, quantity, and location of memory varies • Be sure to know which version you are using! • – Our text references the generic HC11A8 version • – We use the HC11E9 version in the lab

  17. Working with memory • Usually work with 8-bit data values in HC11 (sometimes 16-bit values) • Addresses are 16 bits • Example:

  18. Working with memory • Often show memory contents as follows: • $110 8E 01 FF BD 60 00 CE 8A C0 31 E2 42 29 90 01 FE • Addr 16 data values • 16-bit data values are stored in consecutive memory locations • – MSB = first location • – LSB = second location • – What is the 16-bit value stored at location $11A?

  19. 68HC11 register set

  20. 68HC11 register set • 68HC11 CPU registers • – Accumulators ACCA and ACCB used for computations • » 8-bit values • » For 16-bit computation, ACCA and ACCB may be combined and accessed as ACCD • – Index registers IX and IY generally used to hold addresses • » 16-bit values • » Used as pointers to memory locations • » Some instructions use them for 16-bit computation, also CONTD

  21. 68HC11 register set – SP and PC » Used by the CPU » Not generally used by the programmer • Programming model – Register-register operations – Register-memory operations – Memory-only operations – Indexed addressing

  22. Condition code register

  23. 5 on-chip I/O ports • Port A (8 bits) • – 1 bidirectional pin, 4 output pins, 3 input pins • – Also used for timer • Port D (6 bits) • – 6 bidirectional pins (controlled by direction register) • – Also used for asynchronous (SCI) and synchronous • serial (SPI) I/O • Port E (8 bits) • – 8 input pins • – Also used for A/D converter CONTD

  24. 5 on-chip I/O ports • Port B (8 bits) – 8 output pins with optional handshaking – Also used as address in expanded mode (replaced by PRU) • Port C (8 bits) – 8 bidirectional pins with optional handshaking and wired-or mode – Also used as data/address in expanded mode (replaced by PRU)

  25. I/O registers • HC11 includes 64 I/O registers • – Each has a specific function • – Some are used for system configuration • – Others are used to interface with the different • I/O subsystems • » Control • » Status • » Data CONTD

  26. I/O registers • These registers are accessed like memory locations – Addresses $1000 to $103F – Programming Reference Guide and textbook both contain list of I/O registers • Eg., you write a value to a specific I/O port by storing a value to the corresponding memory location – The PORTA register is at address $1000 – The instruction STAA $1000 will write the value in ACCA to Port A

  27. Programming model -- summary • Use ACCA and ACCB for most operations and computations • – 8-bit values • Use ACCD and/or IX for 16-bit computations • IX and IY usually used to hold addresses • – Pointers to memory locations • Perform I/O by reading/writing I/O registers • – Memory locations $1000-$103F • There are also several addressing modes -----but that's a topic for another day

  28. MC68HC11 EVBUUniversal Evaluation Board • Kit includes • – MC68HC11 board • – Development software (freeware assembler, PCbug11 monitor, Buffalo monitor) • – Documentation • Compact, low-cost "universal" evaluation board • – MC68HC11E9 or MC68HCX711E9 • » 12K ROM or EPROM CONTD

  29. MC68HC11 EVBUUniversal Evaluation Board • » 512 bytes EEPROM • » 512 bytes RAM – 8 MHz crystal (2 MHz bus clock) – RS232 interface (MC145407) with DB25 connector – Reset switch (MC34064P) – Wire-wrap area • Added for ECPE 4535 at Virginia Tech: – Power supply – Protoboard area – IASM11 assembler and SIM11 simulator

  30. Designing with the MC68HC11 • Understand HC11 capabilities • – Microcontroller resources • – Standard components such as switches and displays • Understand application domain • – Application requirements • – Appropriate algorithms • – Data and signal formats CONTD

  31. Designing with the MC68HC11 • Structure the design – Decompose functions and map to resources – Define interfaces between functions and keep them simple – Specify memory and timing requirements for each function – Understand interactions for timing, interrupts, data, etc.

More Related