1 / 30

The FP420 R&D Project

The FP420 R&D Project. LOI to LHCC signed by 29 institutes from 11 countries - more in the process of joining. The aim of FP420 is to install high precision silicon tracking and fast timing detectors close to the beams at 420m from ATLAS and / or CMS.

ebaldwin
Download Presentation

The FP420 R&D Project

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The FP420 R&D Project LOI to LHCC signed by 29 institutes from 11 countries - more in the process of joining • The aim of FP420 is to install high precision silicon tracking and fast timing detectors close to the beams at 420m from ATLAS and / or CMS FP420 is basically a spectrometer using LHC magnets to bend protons with small momentum loss out of the beam (moveable silicon tracker ~ 8m long) “The LHCC acknowledges the scientific merit of the FP420 physics program and the interest in its exploring its feasibility.” - LHCC “The panel believed that this offers a unique opportunity to extend the potential of the LHC and has the potential to give a high scientific return.” - UK PPRP (PPARC)

  2. The FP420 R&D Project Motivation from KMR calculations (e.g. hep-ph 0111078) • Selection rules mean that central system is (to a good approx) 0++ • If you see a new particle produced exclusively with proton tags you know its quantum numbers • CP violation in the Higgs sector shows up directly as azimuthal asymmetries • Proton tagging may be the discovery channel in certain regions of the MSSM • Tagging the protons means excellent mass resolution (~ GeV) irrespective of the decay products of the central system • At low luminosity (~ 30 fb-1) we can : • Establish the quantum numbers of SM Higgs • Be the discovery channel in certain regions of the MSSM • Make high precision measurements of WW / ZZ couplings • Host of interesting QCD measurements (0.002 < xIP < 0.015 )

  3. The FP420 R&D Project Motivation from KMR calculations (e.g. hep-ph 0111078) • Selection rules mean that central system is (to a good approx) 0++ • If you see a new particle produced exclusively with proton tags you know its quantum numbers • CP violation in the Higgs sector shows up directly as azimuthal asymmetries • Proton tagging may be the discovery channel in certain regions of the MSSM • Tagging the protons means excellent mass resolution (~ GeV) irrespective of the decay products of the central system • At low luminosity (~ 30 fb-1) we can : • Establish the quantum numbers of SM Higgs • Be the discovery channel in certain regions of the MSSM • Make high precision measurements of WW / ZZ couplings • Host of interesting QCD measurements (0.002 < xIP < 0.015 )

  4. The FP420 R&D Project Motivation from KMR calculations (e.g. hep-ph 0111078) • Selection rules mean that central system is (to a good approx) 0++ • If you see a new particle produced exclusively with proton tags you know its quantum numbers • CP violation in the Higgs sector shows up directly as azimuthal asymmetries • Proton tagging may be the discovery channel in certain regions of the MSSM • Tagging the protons means excellent mass resolution (~ GeV) irrespective of the decay products of the central system • In addition, at higher luminosity (~ 100 fb-1) we can : • Make direct observation of CP violation in some SUSY Higgs scenarios • Disentangle wide range of SUSY scenarios, including nearly degenerate Higgs sectors

  5. The FP420 R&D Project Motivation from KMR calculations (e.g. hep-ph 0111078) • Selection rules mean that central system is (to a good approx) 0++ • If you see a new particle produced exclusively with proton tags you know its quantum numbers • CP violation in the Higgs sector shows up directly as azimuthal asymmetries • Proton tagging may be the discovery channel in certain regions of the MSSM • Tagging the protons means excellent mass resolution (~ GeV) irrespective of the decay products of the central system FP420 turns the LHC into a glue-glue (and ) collider where you know the beam energy of the gluons to ~ 2 GeV.

  6. FP420 Schematic Outline M ~ 200 GeV M ~ 30 GeV Spectrometer using LHC magnets to bend protons with small momentum loss out of the beam

  7. The 420m region at the LHC

  8. The 420m region at the LHC Warm beam pipes in air Detectors

  9. The 420m region at the LHC

  10. How will the redesign be achieved ? ~ £110k from PPRP to fund cryogenic engineering from Cockcroft Institute + CERN designer (current 420m cryostat designer). Managed by Keith Potter at CERN

  11. Movement Mechanism Designs Louvain + Torino + Helsinki

  12. Movement Mechanism Designs Impact of near-beam structures on LHC beams - 1 RA from PPRP working with Roger Jones + Rob Appleby at Cockcroft Louvain + Torino + Helsinki

  13. FP420 Silicon Detector Stations 7.2 mm x 24mm (7.2 x 8 mm2 sensors) 5 years at 1035 cm-2 s-1

  14. FP420 Fast timing Detectors US R&D funded • 1% events at LHC have diffractive proton track in FP420 • @ 2 x 1033 cm-2s-1, 7 interactions / bunch crossing • -> 30% of FP420 events have an additional track • Matching mass and rapidity of central system removes large fraction of these • Of the remaining, 97.4% rejected by fast timing detectors with 10ps timing resolution (2.1 mm) • Preliminary studies give s(overlap) = s(signal) for Higgs -> bb channel @ 2 x 1033 cm-2s-1 .

  15. FP420 Acceptance and Resolution 3 mm + 3 mm 7.5 mm + 3 mm 3 mm 25 mm 30 mm 5 mm 7.5 mm 10 mm 22 mm MB apertures

  16. FP420 alignment • @ 1 x 1033 cm-2 s-1 expect ~ 100 - events / fill with standard trigger thresholds • Simulations (Louvain) indicate precision is better than necessary (theoretical limit is LHC beam energy uncertainty , 0= 0.77 GeV ~ 50 microns) (also WW, M> 200 GeV, 100 fb -> very high sensitivity to anomalous quartic couplings)

  17. FP420 alignment 5 m will be possible - test bench under construction at CERN Helene Mainaud-Durand, CERN

  18. FP420 L1 Trigger • Trigger latency does not allow for 420m detectors to be included in L1 at ATLAS or CMS in standard running mode • Problem for low-mass Higgs -> bb jets • @ 1 x 1032, no pile-up, isolation criteria allows L1 di-jet trigger (rate 2.6 KHz 2 jets ET > 40 GeV reduced to < 1 KHz with isolation + topological cuts) • @ 2 x 1033, 7 pile-up events, tag at 220m + topological cuts OK • @ 1034 require increase in trigger latency from 3.2 -> 4 s (SLHC ~ 6.4 s) • 20% bb events can be saved with triggers at all luminosities • All other channels, e.g. WW(*) ,  decays, fine.

  19. The KMR Calculation of the Exclusive Process q -> Proton Dominant uncertainty: KMR estimate factor of 2-3. Independent estimate by Lund group “definitely less than 10”. Divergent: controlled by Sudakov Power of QT, 6 for pseudo-scalar Jeff Forshaw, this workshop

  20. The benchmark : Standard Model Higgs Production B.E. Cox. et al, Eur. Phys. J. C 45, 401-407 (2006)

  21. The benchmark : Standard Model Higgs Production Standard Model Higgs WW* : MH = 120 GeV s = 0.4 fb MH = 140 GeV s = 1 fb MH = 200 GeV s = 0.5 fb MH = 140 GeV :5 (10) signal (1 (2) “gold platted” dl), negligible background in 30 fb-1 H b jets : MH = 120 GeV s = 2 fb MH = 140 GeV s = 0.7 fb MH = 120 GeV :11 signal, S/B ~ 1 in 30 fb-1 0++ Selection rule Also, since resolution of taggers > Higgs width: QCD Background ~ • The b jet channel is possible, with a good understanding of detectors and clever level 1 trigger • The WW* channel is extremely promising : no trigger problems, better mass resolution at higher masses (even in leptonic / semi-leptonic channel) • If we see Higgs + tags - the quantum numbers are 0++ B.E. Cox. et al, Eur. Phys. J. C 45, 401-407 (2006)

  22. suppressed enhanced FP420 Physics Highlights The intense coupling regime is where the masses of the 3 neutral Higgs bosons are close to each other and tan b is large 0++ selection rule suppresses A production: CEDP ‘filters out’ pseudoscalar production, leaving pure H sample for study MA = 130 GeV, tan b = 50 Mh = 124 GeV :71 signal / 10 background in 60 fb-1 MH = 135 GeV :124 signal / 5 background in 60 fb-1 MA = 130 GeV :1 signal / 5 background in 60 fb-1 Well known difficult region for conventional channels, tagged channel may well be the discovery channel, and is certainly a powerful spin/parity filter

  23. Probing CP violation in the Higgs Sector Azimuthal asymmetry in tagged protons provides direct evidence for CP violation in Higgs sector ‘CPX’ scenario s in fb CP odd active at non-zero t CP even Ongoing work - are there regions of MSSM parameter space where there are large CP violating couplings AND enhanced gluon couplings? B.C., Forshaw, Lee, Monk and Pilaftsis Phys. Rev. D. 68 (2003) 075004 Khoze, Martin and Ryskin Eur. Phys. J. C 24 (2004) 327

  24. CP violation in the Higgs Sector bb decay tt decay tt decay J. Ellis et al hep-ph/0502251

  25. Evidence for Exclusive Production B. C. and A. Pilkington, Phys.Rev.D72:094024,2005

  26. Evidence for Exclusive Production JZ=0 -> for colour singlet bbar production, the born level contributions of a) and b) cancel in the limit mb -> 0

  27. 10 GeV < M<20 GeV Evidence for Exclusive Production

  28. FP420 Key Milestones 12/12 First draft Design Report WP3 28/03 specify candidate designs Aug - Internal and external review WP1 WP2 WP4 17/06 complete drawings for candidates 25/08 Final Spec. 05/09 Test Beam

  29. FP420 Collaboration We are at present reviewing FP420 membership, there are jobs still to be done. Contacts : Brian.cox@cern.ch(ATLAS) Albert.deroeck@cern.ch(CMS)

  30. FP420 Summary • We have built a strong international collaboration with the manpower and expertise to deliver forward proton tagging at high luminosity to the LHC • FP420 adds real discovery potential to ATLAS / CMS. • 12 month R&D study fully funded from UK, US and Belgium (~1000K CHF) • Funding bids and significant manpower from Italy, Germany, Finland, Canada • Agreed list of key R&D areas (with CERN) to address machine safety issues and physics goals. • Technical design by Feb 2007 (Manchester 2006) and (if successful) TDRs to LHCC from ATLAS / CMS spring 2007. • First opportunity for installation is autumn 2008, dependent on LHC schedule. • Physics returns potentially huge

More Related