1 / 18

Surface energy balance (2)

Surface energy balance (2). Review of last lecture. What is energy? 3 methods of energy transfer The names of the 6 wavelength categories in the electromagnetic radiation spectrum. The wavelength range of Sun (shortwave) and Earth (longwave) radition

dyre
Download Presentation

Surface energy balance (2)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Surface energy balance (2)

  2. Review of last lecture • What is energy? 3 methods of energy transfer • The names of the 6 wavelength categories in the electromagnetic radiation spectrum. The wavelength range of Sun (shortwave) and Earth (longwave) radition • Earth’s energy balance at the top of the atmosphere. Incoming shortwave = Reflected Shortwave+ Emitted longwave • Earth’s energy balance at the surface. Incoming shortwave + Incoming longwave = Reflected shortwave + Emitted longwave + Latent heat flux + Sensible heat flux + Subsurface conduction

  3. Surface energy balance Incoming shortwave + Incoming longwave = Reflected shortwave + Emitted longwave + Latent heat flux + Sensible heat flux + Subsurface conduction SWdn SWup LWdn LWup LH SH dT/dt Fc

  4. Incoming solar radiation SWdn = S cos where S is solar constant S=1366 Watts/m2  is solar zenith angle, which is the angle between the local zenith and the line of line of sight to the sun

  5. Reflected solar radiation SWup = SWdn where  is albedo, which is the ratio of reflected flux density to incident flux density, referenced to some surface.

  6. Global map of surface albedo  Typical albedo of various surfaces

  7. Incoming and surface emitted longwave radiation • Can be estimated using the blackbody approximation • Blackbodies: purely hypothetical bodies that absorb and emit the maximum radiation at all wavelengths • The Earth and the sun are close to blackbodies. • The atmosphere is not close to blackbody, but it can served as the first order approximation

  8. Stefan-Boltzmann Law • States that radiation emitted from a blackbody is a function ONLY of temperature I=T4 where I is the intensity of the radiation, T is the temperature in K, and  is the Stefan-Boltzmann constant, 5.67 x 10-8 W m-2 K-4) • So, hotter surface emit more energy than colder surface (double T, 16x more radiation) • Earth (290K)= 401 Wm-2, Sun (6000K) = 7.3 x 106 Wm-2. So ISun >> Iearth • Incoming LW (air-emitted): LWdn = Tair4 • Surface emitted LW: LWup=Ts4

  9. Net longwave radiation ( LWdn - Lwup = Tair4 - Ts4 ) • Is generally small because air temperature is often close to surface temperature • Is generally smaller than net shortwave radiation even when air temperature is not close to surface temperature • Important during the night when there is no shortwave radiation

  10. Sensible heat flux • Sensible heat: heat energy which is readily detected • Sensible heat flux SH =  Cd Cp V (Tsurface - Tair) Where  is the air density, Cd is flux transfer coefficient, Cp is specific heat of air (the amount of energy needed to increase the temperature by 1 degree for 1 kg of air), V is surface wind speed, Tsurface is surface temperature, Tair is air temperature • Magnitude is related surface wind speed • Stronger winds cause larger flux • Sensible heat transfer occurs from warmer to cooler areas (i.e., from ground upward) • Cd needs to be measured from complicated eddy flux instrument

  11. Latent heat flux • LH =  Cd L V (qsurface - qair) Where  is the air density, Cd is flux transfer coefficient, L is latent heat of water vapor, V is surface wind speed, qsurface is surface specific humidity, qair is surface air specific humidity • Magnitude is related surface wind speed • Stronger winds cause larger flux • Latent heat transfer occurs from wetter to drier areas (i.e., from ground upward) • Cd needs to be measured from complicated eddy flux instrument

  12. Bowen ratio • The ratio of sensible heat flux to latent heat flux B = SH/LH Where SH is sensible heat flux, LH is latent heat flux • B = Cp(Tsurface - Tair) / L(qsurface - qair)can be measured using simple weather station. Together with radiation measurements (easier than measurements of turbulent fluxes), we can get an estimate of LH and SH Net radiative flux Fr = SWdn - SWup + LWdn - LWup Net turbulent flux Ft = LH + SH dT/dt Fd neglected From surface energy balance Ft = Fr (i.e. LH+SH = Fr) With the help of SH=B LH, we get LH=Fr/(B+1), SH=Fr B/(B+1)

  13. Bowen ratio (cont.) • When surface is wet, energy tends to be released as LH rather than SH. So LH is large while SH is small, then B is small. • Typical values of B: Semiarid regions: 5 Grasslands and forests: 0.5 Irrigated orchards and grass: 0.2 Sea: 0.1 Some advective situations (e.g. oasis): negative

  14. Map of Bowen ratio for Texas (By Prof. Maidment, U of Texas) River flow Latent heat flux Bowen ratio

  15. Subsurface conductionFourier’s Law • The law of heat conduction, also known as the Fourier’s law, states that the heat flux due to conduction is proportional to the negative gradient in temperature. • In upper ocean, soil and sea ice, the temperature gradient is mainly in the vertical direction. So the heat flux due to conduction Fc is: Fc = -  dT/dz where  is thermal conductivity in the unit of W/(m K) • Note that Fc is often much smaller than the other terms in surface energy balance and can be neglected

  16. Other heat sources • Precipitation: Rain water generally has a temperature lower than the surface temperature and therefore can cool down the surface • Biochemical heating: chemical reaction involving biomolecules may generate or consume heat • Anthropogenic heat: Fossil fuel combustion, Electrical systems

  17. Summary: Surface energy balance Incoming shortwave + Incoming longwave = Reflected shortwave + Emitted longwave + Latent heat flux + Sensible heat flux + Subsurface conduction SWdn =Scos SWup =SWdn  LWdn =Tair4 LWup=Ts4 LH=CdLV(qsurface- qair) SH=CdCpV(Tsurface- Tair)  dT/dt Fc = -  dT/dz • Bowen ratio B= SH/LH = Cp(Tsurface - Tair) / L(qsurface - qair) provides a simple way for estimating SHand LH when the net radiative flux Fr is available LH=Fr/(B+1), SH=Fr B/(B+1) • Subsurface conduction: Fourier’s law • Other heat sources: precipitation, biochemical, anthropogenic

  18. Works cited • http://nsidc.org/cryosphere/seaice/processes/albedo.html

More Related