1 / 44

PetroOXY: Advanced Oxidation Stability Testing Method for Gasoline, Diesel, FAME, and Biodiesel

PetroOXY introduces a novel method for oxidation stability testing compliant with ASTM standards for Gasoline (D 7525) and Diesel, FAME, and Biodiesel (D 7545). The process involves three key steps that ensure reliable and repeatable results. With automatic oxygen filling and purging procedures at 700 kPa pressure, a 5ml sample is tested in the vessel. Once the test is completed, the device initiates cooling and oxygen discharging. The test can run in online mode with a storage rate of up to 1/s or data can be retrieved post-test at a rate of 1/min. Data is stored in XML format for further analysis in PetroOXY-Logger-Viewer or Excel. Enjoy seamless data transfer capabilities after each test for efficient processing.

dvince
Download Presentation

PetroOXY: Advanced Oxidation Stability Testing Method for Gasoline, Diesel, FAME, and Biodiesel

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PetroOXY A new method of oxidation stability testing ASTM D 7525 for Gasoline ASTM D 7545 for Diesel, FAME and Biodiesel Three steps to reliable and repeatable results

  2. 5ml sample is filled into the test vessel

  3. Automatic filling with 700 kPa oxygen

  4. Automatic filling with 700 kPa oxygen

  5. Automatic filling with 700 kPa oxygen

  6. Automatic purging (releasing of oxygen)

  7. Automatic purging (releasing of oxygen)

  8. Automatic filling with 700kPa oxygen

  9. Automatic filling with 700kPa oxygen

  10. Test is finished, device is cooling

  11. Test is finished, device is cooling

  12. Test is finished, device is cooling

  13. Test is finished, device is cooling

  14. Test is finished, discharging of oxygen

  15. Test is finished, discharging of oxygen

  16. Test is finished

  17. PetroOXY can either be run in online mode (storage rate up to 1/s) or data can be read out after a test (storage rate 1/min) Data are stored as xml file and can be reopened in PetroOXY-Logger-Viewer or in EXCEL for further calculations.

  18. Data transfer after the test

More Related