1 / 11

FPI 3s Class 2013/14

FPI 3s Class 2013/14. Gingerbread House Construction Instructions. Materials Needed. 4 graham crackers Knife Cutting board Hot glue gun Base for house (paper plate). 4 . 1. 5. 2 . 3 . Step 1: Exterior Walls. Cut 1 graham cracker in half along center score using a sawing motion.

drago
Download Presentation

FPI 3s Class 2013/14

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. FPI 3s Class 2013/14 Gingerbread House Construction Instructions

  2. Materials Needed • 4 graham crackers • Knife • Cutting board • Hot glue gun • Base for house (paper plate) 4. 1. 5. 2. 3.

  3. Step 1: Exterior Walls • Cut 1 graham cracker in half along center score using a sawing motion

  4. Step 2: Score end wall • Place one graham cracker on the cutting board • Score the graham cracker from the center line to the opposing corner • Score the cracker a second time from the opposing side of the center line to the opposite corner, creating an “X” over half of the cracker

  5. Step 3: Cut End Pieces • Cut the graham cracker along the scores using a sawing motion • Repeat step 2 and 3 to create a second end piece • Eat leftover pieces

  6. Step 4: Cut Roof Pieces • Cut 1 graham cracker in half along center score using a sawing motion

  7. Step 5: Glue exterior and side walls • Glue one exterior wall to one side wall using the hot glue gun • Note: be sure to glue the exterior wall with the long side of the cracker facing up and down so center score of the side wall is aligned with the top of the exterior wall • Repeat for other corner of house • Let assembled pieces dry

  8. Step 6: Glue two sides of house together • Spread glue along the outer edges of one of the assembled house corners, then press against the other corner • Let dry

  9. Step 7: Build Roof • Spread glue along outer edge of roof • Attach two roof sections together, place along top of assembled house to ensure angle is correct • Let dry

  10. Step 8: Attach Roof • Spread glue along the upper ridge of the side pieces • Place the roof along the upper ridge of the assembled side pieces • Fill in any gaps with hot glue • Let dry

  11. Step 9: Attach to base • Glue the house to the base • Congratulations! You’re done

More Related