1 / 54

Chapter 22: Gauss's Law - Electric Flux and Applications

Explore Gauss's Law and its applications in calculating electric flux and the electric field in situations with symmetry. Learn how to apply Gauss's law to different charge distributions and surfaces.

dorisgjones
Download Presentation

Chapter 22: Gauss's Law - Electric Flux and Applications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 22Gauss’s Law

  2. 22-1 Electric Flux Flux through a closed surface:

  3. Think in terms of flux lines:

  4. 22-2 Gauss’s Law The net number of field lines through the surface is proportional to the charge enclosed, and also to the flux, giving Gauss’s law: This can be used to find the electric field in situations with a high degree of symmetry.

  5. 22-2 Gauss’s Law For a point charge, Spherical Therefore, Solving for E gives the result we expect from Coulomb’s law:

  6. 22-2 Gauss’s Law Using Coulomb’s law to evaluate the integral of the field of a point charge over the surface of a sphere surrounding the charge gives: Looking at the arbitrarily shaped surface A2, we see that the same flux passes through it as passes through A1. Therefore, this result should be valid for any closed surface.

  7. 22-2 Gauss’s Law Finally, if a gaussian surface encloses several point charges, the superposition principle shows that: Therefore, Gauss’s law is valid for any charge distribution. Note, however, that it only refers to the field due to charges within the gaussian surface – charges outside the surface will also create fields.

  8. 22-2 Gauss’s Law Conceptual Example 22-2: Flux from Gauss’s law. Consider the two gaussian surfaces, A1 and A2, as shown. The only charge present is the charge Q at the center of surface A1. What is the net flux through each surface, A1 and A2?

  9. 22-3 Applications of Gauss’s Law Example 22-3: Spherical conductor. A thin spherical shell of radius r0 possesses a total net charge Q that is uniformly distributed on it. Determine the electric field at points (a) outside the shell, and (b) within the shell. (c) What if the conductor were a solid sphere? Spherical

  10. 22-3 Applications of Gauss’s Law Example 22-4: Solid sphere of charge. An electric charge Q is distributed uniformly throughout a nonconducting sphere of radius r0. Determine the electric field (a) outside the sphere (r > r0) and (b) inside the sphere (r < r0). Spherical/radial

  11. 22-3 Applications of Gauss’s Law Example 22-5: Nonuniformly charged solid sphere. Suppose the charge density of a solid sphere is given by ρE = αr2, where α is a constant. (a) Find α in terms of the total charge Q on the sphere and its radius r0. (b) Find the electric field as a function of r inside the sphere.

  12. 22-3 Applications of Gauss’s Law Example 22-6: Long uniform line of charge. A very long straight wire possesses a uniform positive charge per unit length, λ. Calculate the electric field at points near (but outside) the wire, far from the ends. Linear, Cylindrical

  13. 22-3 Applications of Gauss’s Law Example 22-7: Infinite plane of charge. Charge is distributed uniformly, with a surface charge density σ(σ = charge per unit area = dQ/dA) over a very large but very thin nonconducting flat plane surface. Determine the electric field at points near the plane. Planar & cylindrical

  14. 22-3 Applications of Gauss’s Law Example 22-8: Electric field near any conducting surface. Show that the electric field just outside the surface of any good conductor of arbitrary shape is given by E = σ/ε0 where σ is the surface charge density on the conductor’s surface at that point.

  15. 22-3 Applications of Gauss’s Law The difference between the electric field outside a conducting plane of charge and outside a nonconducting plane of charge can be thought of in two ways: • The field inside the conductor is zero, so the flux is all through one end of the cylinder. • The nonconducting plane has a total charge density σ, whereas the conducting plane has a charge density σ on each side, effectively giving it twice the charge density.

  16. 22-3 Applications of Gauss’s Law Conceptual Example 22-9: Conductor with charge inside a cavity. Suppose a conductor carries a net charge +Q and contains a cavity, inside of which resides a point charge +q. What can you say about the charges on the inner and outer surfaces of the conductor?

  17. 22-3 Applications of Gauss’s Law Procedure for Gauss’s law problems: • Identify the symmetry, and choose a gaussian surface that takes advantage of it (with surfaces along surfaces of constant field). • Draw the surface. • Use the symmetry to find the direction of E. • Evaluate the flux by integrating. • Calculate the enclosed charge. • Solve for the field.

  18. 22-4 Experimental Basis of Gauss’s and Coulomb’s Laws In the experiment shown, Gauss’s law predicts that the charge on the ball flows onto the surface of the cylinder when they are in contact. This can be tested by measuring the charge on the ball after it is removed – it should be zero.

  19. Summary of Chapter 22 • Electric flux: • Gauss’s law: • Gauss’s law can be used to calculate the field in situations with a high degree of symmetry. • Gauss’s law applies in all situations, and therefore is more general than Coulomb’s law.

  20. Chapter 23Electric Potential

  21. Units of Chapter 23 • Electric Potential Energy and Potential Difference • Relation between Electric Potential and Electric Field • Electric Potential Due to Point Charges • Potential Due to Any Charge Distribution • Equipotential Surfaces • Electric Dipole Potential

  22. Units of Chapter 23 • E Determined from V • ElectrostaticPotential Energy; the Electron Volt

  23. 23-1 Electrostatic Potential Energy and Potential Difference The electrostatic force is conservative – potential energy can be defined. Change in electric potential energy is negative of work done by electric force:

  24. ConcepTest 23.1bElectric Potential Energy II 1)proton 2)electron 3)both feel the same acceleration 4) neither – there is no acceleration 5) they feel the same magnitude acceleration but opposite direction A proton and an electron are in a constant electric field created by oppositely charged plates. You release the proton from the positive side and the electron from the negative side. Which has the larger acceleration? Electron electron - + Proton proton

  25. ConcepTest 23.1bElectric Potential Energy II 1)proton 2)electron 3)both feel the same acceleration 4) neither – there is no acceleration 5) they feel the same magnitude acceleration but opposite direction A proton and an electron are in a constant electric field created by oppositely charged plates. You release the proton from the positive side and the electron from the negative side. Which has the larger acceleration? Electron Since F = maand the electron is much less massive than the proton, the electron experiences the larger acceleration. electron - + Proton proton

  26. 23-1 Electrostatic Potential Energy and Potential Difference Electric potential is defined as potential energy per unit charge: Unit of electric potential: the volt (V): 1 V = 1 J/C.

  27. 23-1 Electrostatic Potential Energy and Potential Difference Only changes in potential can be measured, allowing free assignment of V = 0:

  28. 23-1 Electrostatic Potential Energy and Potential Difference Analogy between gravitational and electrical potential energy:

  29. 23-1 Electrostatic Potential Energy and Potential Difference Conceptual Example 23-1: A negative charge. Suppose a negative charge, such as an electron, is placed near the negative plate at point b, as shown here. If the electron is free to move, will its electric potential energy increase or decrease? How will the electric potential change?

  30. 23-1 Electrostatic Potential Energy and Potential Difference Electrical sources such as batteries and generators supply a constant potential difference. Here are some typical potential differences, both natural and manufactured:

  31. 23-2 Relation between Electric Potential and Electric Field The general relationship between a conservative force and potential energy: Substituting the potential difference and the electric field:

  32. 23-2 Relation between Electric Potential and Electric Field The simplest case is a uniform field:

  33. 23-2 Relation between Electric Potential and Electric Field Example 23-3: Electric field obtained from voltage. Two parallel plates are charged to produce a potential difference of 50 V. If the separation between the plates is 0.050 m, calculate the magnitude of the electric field in the space between the plates.

  34. 23-2 Relation between Electric Potential and Electric Field Example 23-4: Charged conducting sphere. Determine the potential at a distance r from the center of a uniformly charged conducting sphere of radius r0 for (a) r > r0, (b) r = r0, (c) r < r0. The total charge on the sphere is Q.

  35. 23-2 Relation between Electric Potential and Electric Field The previous example gives the electric potential as a function of distance from the surface of a charged conducting sphere, which is plotted here, and compared with the electric field:

  36. 23-3 Electric Potential Due to Point Charges To find the electric potential due to a point charge, we integrate the field along a field line:

  37. 23-3 Electric Potential Due to Point Charges Setting the potential to zero at r =∞ gives the general form of the potential due to a point charge:

  38. 23-3 Electric Potential Due to Point Charges Example: Work required to bring two positive charges close together. What minimum work must be done by an external force to bring a proton q = 1.60×10-19C from a great distance away (take r = ∞) to a point 1.00×10-15 m from another proton?

  39. 23-3 Electric Potential Due to Point Charges Example: Work required to bring two positive charges close together. What minimum work must be done by an external force to bring a proton q = 1.60×10-19C from a great distance away (take r = ∞) to a point 1.00×10-15 m from another proton? W = ke2/r = (9×109) (1.6×10-19)2/ (1×10-15) = 2.3×10-13 J = 2.3×10-13 J

  40. ConcepTest 23.3Electric Potential A B 1)V > 0 2)V = 0 3)V < 0 What is the electric potential at point B?

  41. ConcepTest 23.3Electric Potential A B 1)V > 0 2)V = 0 3)V < 0 What is the electric potential at point B? Since Q2and Q1 are equidistant from point B, and since they have equal and opposite charges, the total potential is zero. Follow-up: What is the potential at the origin of the x y axes?

  42. 23-3 Electric Potential Due to Point Charges Example 23-7: Potential above two charges. Calculate the electric potential (a) at point A in the figure due to the two charges shown.

  43. 23-4 Potential Due to Any Charge Distribution The potential due to an arbitrary charge distribution can be expressed as a sum or integral (if the distribution is continuous): or

  44. 23-4 Potential Due to Any Charge Distribution Example 23-8: Potential due to a ring of charge. A thin circular ring of radius R has a uniformly distributed charge Q. Determine the electric potential at a point P on the axis of the ring a distance x from its center.

  45. 23-4 Potential Due to Any Charge Distribution Example 23-9: Potential due to a charged disk. A thin flat disk, of radius R0, has a uniformly distributed charge Q. Determine the potential at a point P on the axis of the disk, a distance x from its center.

  46. Which of these configurations gives V = 0 at all points on the x axis? ConcepTest 23.5Equipotential Surfaces +2mC +2mC +2mC +1mC -2mC +1mC x x x -1mC -2mC +1mC -2mC -1mC -1mC 1) 2) 3) 4)all of the above 5)none of the above

  47. Which of these configurations gives V = 0 at all points on the x axis? ConcepTest 23.5Equipotential Surfaces +2mC +2mC +2mC +1mC -2mC +1mC x x x -1mC -2mC +1mC -2mC -1mC -1mC 1) 2) 3) 4)all of the above 5)none of the above Only in case (1), where opposite charges lie directly across the x axis from each other, do the potentials from the two charges above the x axis cancel the ones below the x axis.

  48. 23-5 Equipotential Surfaces An equipotential is a line or surface over which the potential is constant. Electric field lines are perpendicular to equipotentials. The surface of a conductor is an equipotential (E// =0 → ∂V/∂s// = 0)

  49. 23-5 Equipotential Surfaces Equipotential surfaces are always perpendicular to field lines; they are always closed surfaces (unlike field lines, which begin and end on charges).

  50. 23-5 Equipotential Surfaces A gravitational analogy to equipotential surfaces is the topographical map – the lines connect points of equal gravitational potential (altitude).

More Related