1 / 42

Introduction to Dynamic Routing Protocol

Introduction to Dynamic Routing Protocol. Routing Protocols and Concepts – Chapter 3 Modified by Tony Chen. 02/19/2010. Notes:. If you see any mistake on my PowerPoint slides or if you have any questions about the materials, please feel free to email me at chento@cod.edu . Thanks!

Download Presentation

Introduction to Dynamic Routing Protocol

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Introduction to Dynamic Routing Protocol Routing Protocols and Concepts – Chapter 3 Modified by Tony Chen 02/19/2010

  2. Notes: • If you see any mistake on my PowerPoint slides or if you have any questions about the materials, please feel free to email me at chento@cod.edu. Thanks! Tony Chen College of DuPage Cisco Networking Academy

  3. Objectives • Describe the role of dynamic routing protocols and place these protocols in the context of modern network design. • Identify several ways to classify routing protocols. • Describe how metrics are used by routing protocols and identify the metric types used by dynamic routing protocols. • Determine the administrative distance of a route and describe its importance in the routing process. • Identify the different elements of the routing table.

  4. Dynamic Routing Protocols • Dynamic routing protocols are usually used in larger networks to ease the administrative and operational overhead of using only static routes. • Typically, a network uses a combination of both a dynamic routing protocol and static routes.

  5. The Evolution of Dynamic Routing Protocols • One of the earliest routing protocols was Routing Information Protocol (RIP). • RIP has evolved into a newer version RIPv2. However, • The newer version of RIP still does not scale to larger network implementations. • To address the needs of larger networks, two advanced routing protocols were developed: Open Shortest Path First (OSPF) and Intermediate System-to-Intermediate System (IS-IS). • Cisco developed Interior Gateway Routing Protocol (IGRP) and Enhanced IGRP (EIGRP), which also scales well in larger network implementations. • Additionally, there was the need to interconnect different internetworks and provide routing among them. Border Gateway Routing (BGP) protocol is now used between ISPs as well as between ISPs and their larger private clients to exchange routing information. • With the advent of numerous consumer devices using IP, the IPv4 addressing space is nearly exhausted. Thus IPv6 has emerged. To support the communication based on IPv6, newer versions of the IP routing protocols have been developed (see the IPv6 row in the table).

  6. Dynamic Routing Protocols • Function(s) of Dynamic Routing Protocols: • -Dynamically share information between routers. • -Automatically update routing table when topology changes. • -Determine best path to a destination. • Compared to static routing, dynamic routing protocols require less administrative overhead. • However, the expense of using dynamic routing protocols is dedicating part of a router's resources for protocol operation including CPU time and network link bandwidth. • One of the primary benefits to using a dynamic routing protocol is that routers exchange routing information whenever there is a topology change. This exchange allows routers to automatically learn about new networks and also to find alternate paths when there is a link failure to a current network.

  7. Dynamic Routing Protocols • Despite the benefits of dynamic routing, static routing still has its place. • There are times when static routing is more appropriate and other times when dynamic routing is the better choice. • More often than not, you will find a combination of both types of routing in any network that has a moderate level of complexity.

  8. Dynamic Routing Protocols • A routing protocol • is a set of processes, algorithms, and messages that are used to exchange routing information and populate the routing table with the routing protocol's choice of best paths • The purpose of a dynamic routing protocol is to: • -Discover remote networks • -Maintaining up-to-date routing information • -Choosing the best path to destination networks • -Ability to find a new best path if the current path is no longer available

  9. Dynamic Routing Protocols • Components of a routing protocol • Data structures • Some routing protocols use tables and/or databases for its operations. This information is kept in RAM • Algorithm • Algorithm is a finite list of steps used in accomplishing a task • Algorithms are used for facilitating routing information and best path determination • Routing protocol messages • These are messages for discovering neighbors and exchange of routing information , and other tasks to learn and maintain accurate information about the network.

  10. Dynamic Routing Protocol Operation • All routing protocols have the same purpose - to learn about remote networks and to quickly adapt whenever there is a change in the topology. • The method that a routing protocol uses to accomplish this depends upon the algorithm it uses and the operational characteristics of that protocol. • In general, the operations of a dynamic routing protocol can be described as follows: • The router sends and receives routing messages on its interfaces. • The router shares routing messages and routing information with other routers that are using the same routing protocol. • Routers exchange routing information to learn about remote networks. • When a router detects a topology change the routing protocol can advertise this change to other routers.

  11. Dynamic Routing Protocols • Advantages of dynamic routing • -Administrator has less work maintaining the configuration when adding or deleting networks. • -Protocols automatically react to the topology changes. • -Configuration is less error-prone. • -More scalable, growing the network usually does not present a problem • Disadvantages of dynamic routing • -Router resources are used (CPU cycles, memory and link bandwidth). • -More administrator knowledge is required for configuration, verification, and troubleshooting. • Advantages of static routing • -It can backup multiple interfaces/networks on a router • -Minimal CPU processing • -Easier for administrator to understand • -Easy to configure • -No extra resources are needed • -More secure • Disadvantages of static routing • -Network changes require manual reconfiguration • -Configuration and maintenance is time-consuming • -Does not scale well in large topologies • -Configuration is error-prone, especially in large networks

  12. Dynamic Routing Protocols

  13. Classifying Routing Protocols • Dynamic routing protocols are grouped according to characteristics. Examples include: • -RIP • -IGRP • -EIGRP • -OSPF • -IS-IS • -BGP • Autonomous System is a group of routers under the control of a single authority.

  14. Classifying Routing Protocols • Dynamic routing protocols: • RIP • A distance vector interior routing protocol • IGRP • The distance vector interior routing developed by Cisco (deprecated from 12.2 IOS and later) • EIGRP • The advanced distance vector interior routing protocol developed by Cisco • OSPF • A link-state interior routing protocol • IS-IS • A link-state interior routing protocol • BGP • A path vector exterior routing protocol

  15. Classifying Routing Protocols • An autonomous system (AS) - otherwise known as a routing domain - is a collection of routers under a common administration. • Because the Internet is based on the ASs concept, two types of routing protocols are required: interior and exterior routing protocols. • -Interior Gateway Protocols (IGP) • are used for intra-autonomous system routing - routing inside an autonomous system • IGPs are used for routing within a routing domain, those networks within the control of a single organization. • An autonomous system is commonly comprised of many individual networks belonging to companies, schools, and other institutions. • IGPs for IP include RIP, IGRP, EIGRP, OSPF, and IS-IS • -Exterior Gateway Protocols (EGP) • are used for inter-autonomous system routing - routing between autonomous systems that are under the control of different administrations • At the ISP level, there are often more important issues than just choosing the fastest path. • BGP is typically used between ISPs and sometimes between a company and an ISP

  16. Autonomous systems • An autonomous system (AS) is a collection of networks under a common administration sharing a common routing strategy. • To the outside world, an AS is viewed as a single entity. The AS may be run by one or more operators while presenting a consistent view of routing to the external world. • The American Registry of Internet Numbers (ARIN), a service provider, or an administrator assigns an identifying number to each AS. This autonomous system number is a 16 bit number. Routing protocols, such as Cisco’s IGRP, require assignment of a unique, autonomous system number. American Registry for Internet Numbers http://www.arin.net/registration/asn/index.html Autonomous System number (ASN) resource guide http://www.apnic.net/services/asn_guide.html IS-IS

  17. Autonomous systems • Cisco system AS number: • http://ws.arin.net/cgi-bin/whois.pl

  18. Autonomous systems RFC 1930 • AS just like IP, it needs to apply from ARIN or the appropriate region and be unique on the internet. • The Internet Assigned Numbers Authority (IANA) has reserved the following block of AS numbers for private use (not to be advertised on the global Internet): 64512 through 65535 • http://arin.net/education/asn_process/index.html

  19. Classifying Routing Protocols • IGP: Comparison ofDistance Vector & Link State Routing Protocols • Distance vector • routes are advertised as vectors of distance & direction. • Distance is defined in terms of a metric such as hop count (RIP) • Direction is simply the next-hop router or exit interface • Distance vector protocols typically use the Bellman-Ford algorithm for the best path route determination • incomplete view of network topology. • Distance vector protocols use routers as sign posts along the path to the final destination. • Distance vector routing protocols do not have an actual map of the network topology • Generally, periodic updates. • Some distance vector protocols periodically send complete routing tables to all connected neighbors.

  20. Classifying Routing Protocols • IGP: Comparison ofDistance Vector & Link State Routing Protocols • Link state • complete view of network topology is created. • The sign posts along the way from source to destination are not necessary, because all link-state routers are using an identical "map" of the network. • updates are not periodic. • After the network has converged, a link-state update only sent when there is a change in the topology.

  21. Classifying Routing Protocols • Distance vector protocols work best in situations where: • The network is simple and flat and does not require a special hierarchical design. • The administrators do not have enough knowledge to configure and troubleshoot link-state protocols. • Specific types of networks, such as hub-and-spoke networks, are being implemented. • Worst-case convergence times in a network are not a concern. • Link-state protocols work best in situations where: • The network design is hierarchical, usually occurring in large networks. • The administrators have a good knowledge of the implemented link-state routing protocol. • Fast convergence of the network is crucial. • Comparison ofDistance Vector & Link State Routing Protocols

  22. Classifying Routing Protocols • Classful routing protocols • Do NOT send subnet mask in routing updates, • Do NOT support VLSM, • Classful routing protocols cannot be used when a network is subnetted using more than one subnet mask, • Tony: This does not mean you can not subnet the classfull network. You can still subnet it, but can only do it once and all network needs to have the identical mask. • Routing protocols such as RIPv1 and IGRP. • Classless routing protocols • Do send subnet mask in routing updates. • support variable length subnet masks (VLSM). • In the figure, the classless version of the network is using both /30 and /27 masks in the same topology. • Tony: It means you can create the network with all different sizes of subnets. They don’t need to have the same mask. • Classless routing protocols are RIPv2, EIGRP, OSPF, IS-IS, BGP.

  23. Classifying Routing Protocols • Convergence is defined as when all routers’ routing tables are at a state of consistency • The network has converged when all routers have complete and accurate information about the network • Convergence time is the time it takes routers to share information, calculate best paths, and update their routing tables. • Routing protocols can be rated based on the speed to convergence; the faster the convergence, the better the routing protocol. • RIP and IGRP are slow to converge • EIGRP and OSPF are faster to converge.

  24. Routing Protocols Metrics • To select the best path, the routing protocol must be able to evaluate and differentiate between the available paths. For this purpose a metric is used. • Metric • A value used by a routing protocol to determine which routes are better than others. • Each routing protocol uses its own metric. • RIP uses hop count, • The hop count refers to the number of routers a packet must cross to reach the destination network. • For R3 in the figure, network 172.16.3.0 is two hops, or two routers away. • EIGRP uses a combination of bandwidth and delay, • OSPF uses bandwidth (cost).

  25. Routing Protocols Metrics • Metrics used in IP routing protocols • Bandwidth • Influences path selection by preferring the path with the highest bandwidth • Cost • A value determined either by the IOS or by the network administrator to indicate preference for a route. Cost can represent a metric, a combination of metrics or a policy. • Delay • Considers the time a packet takes to traverse a path • Hop count • A simple metric that counts the number of routers a packet must traverse • Load • Considers the traffic utilization of a certain link • Reliability • Assesses the probability of a link failure, calculated from the interface error count or previous link failures OSPF RIP

  26. Routing Protocols Metrics • The Metric Field in the Routing Table • Metric used for each routing protocol • -RIP - hop count • -IGRP & EIGRP - Bandwidth (used by default), Delay (used by default), Load, Reliability • -IS-IS & OSPF – Cost, Bandwidth (Cisco’s implementation) • Refer to the example in the figure The routers are using the RIP routing protocol. • The metric associated with a certain route can be best viewed using the show ip route command. • The metric value is the second value in the brackets for a routing table entry. • In the figure, R2 has a route to the 192.168.8.0/24 network that is 2 hops away. • R 192.168.8.0/24 [120/2] via 192.168.4.1, 00:00:26, Serial0/0/1

  27. Routing Protocols Metrics • Load balancing • when two or more routes to the same destination have identical metric values • This is the ability of a router to distribute packets among multiple same cost paths Load balancing does not automatically means the interfaces will get use equally. R2 load balances traffic to PC5 over two equal cost paths. ??????

  28. Routing Protocols Metrics • Load balancing can be done either per packet or per destination. • How a router actually load balances packets between the equal-cost paths is governed by the switching process. Example R2 load balances traffic to PC5 over two equal cost paths.

  29. Router Paths: Equal Cost Load Balancing • To solve this dilemma, a router will useEqual Cost Load Balancing. This means the router sends packets over the multiple exit interfaces listed in the routing table. • per-packet load balancing • ( Process Switching) • per-destination load balancing. • (Fast Switching) Router(config-if)# ip route-cache Router(config-if)#noip route-cache ping 10.0.0.1 ping 10.0.0.1 ping 10.0.0.2 ping 10.0.0.2

  30. Load balancing with RIP per-packet load balancing debug ip packet IP packet debugging is on GAD# *Mar 1 19:10:29.646: IP: tableid=0, s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/1), routed via RIB *Mar 1 19:10:29.646: IP: s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/1), g=192.168.13.2, len 60, forward *Mar 1 19:10:30.654: IP: tableid=0, s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/0), routed via RIB *Mar 1 19:10:30.654: IP: s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/0), g=192.168.15.2, len 60, forward *Mar 1 19:10:31.654: IP: tableid=0, s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/1), routed via RIB *Mar 1 19:10:31.654: IP: s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/1), g=192.168.13.2, len 60, forward *Mar 1 19:10:32.218: IP: s=0.0.0.0 (FastEthernet0/0), d=255.255.255.255, len 604, rcvd 2 *Mar 1 19:10:32.654: IP: tableid=0, s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/0), routed via RIB *Mar 1 19:10:32.654: IP: s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/0), g=192.168.15.2, len 60, forward *Mar 1 19:10:33.654: IP: tableid=0, s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/1), routed via RIB *Mar 1 19:10:33.654: IP: s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/1), g=192.168.13.2, len 60, forward *Mar 1 19:10:34.654: IP: tableid=0, s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/0), routed via RIB *Mar 1 19:10:34.654: IP: s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/0), g=192.168.15.2, len 60, forward *Mar 1 19:10:35.654: IP: tableid=0, s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/1), routed via RIB *Mar 1 19:10:35.654: IP: s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/1), g=192.168.13.2, len 60, forward *Mar 1 19:10:35.974: IP: s=192.168.13.1 (local), d=255.255.255.255 (Serial0/1), len 72, sending broad/multicast *Mar 1 19:10:36.654: IP: tableid=0, s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/0), routed via RIB *Mar 1 19:10:36.654: IP: s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/0), g=192.168.15.2, len 60, forward Router(config-if)#noip route-cache RIB: http://www.cisco.com/en/US/products/ps5763/products_configuration_guide_chapter09186a00802a1fae.html#wp1045020

  31. Load balancing with RIP per-destination load balancing debug ip packet IP packet debugging is on GAD# *Mar 1 19:14:36.006: IP: tableid=0, s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/0), routed via RIB *Mar 1 19:14:36.006: IP: s=192.168.14.2 (FastEthernet0/0), d=192.168.16.2 (Serial0/0), g=192.168.15.2, len 60, forward *Mar 1 19:14:36.026: IP: tableid=0, s=192.168.16.2 (Serial0/1), d=192.168.14.2 (FastEthernet0/0), routed via RIB *Mar 1 19:14:36.026: IP: s=192.168.16.2 (Serial0/1), d=192.168.14.2 (FastEthernet0/0), g=192.168.14.2, len 60, forward *Mar 1 19:14:37.978: IP: s=0.0.0.0 (FastEthernet0/0), d=255.255.255.255, len 604, rcvd 2 *Mar 1 19:14:44.122: IP: s=0.0.0.0 (FastEthernet0/0), d=255.255.255.255, len 604, rcvd 2 *Mar 1 19:14:46.562: IP: s=192.168.14.1 (local), d=255.255.255.255 (FastEthernet0/0), len 92, sending broad/multicast *Mar 1 19:14:47.278: IP: s=192.168.15.1 (local), d=255.255.255.255 (Serial0/0), len 72, sending broad/multicast *Mar 1 19:14:50.266: IP: s=0.0.0.0 (FastEthernet0/0), d=255.255.255.255, len 604, rcvd 2 *Mar 1 19:14:51.958: IP: s=192.168.13.2 (Serial0/1), d=255.255.255.255, len 72, rcvd 2 *Mar 1 19:14:51.962: IP: s=192.168.15.2 (Serial0/0), d=255.255.255.255 Router(config-if)# ip route-cache RIB: http://www.cisco.com/en/US/products/ps5763/products_configuration_guide_chapter09186a00802a1fae.html#wp1045020

  32. What is unequal cost load balancing? • Unequal Cost Load Balancing with EIGRP • EIGRP Load Balancing • Every routing protocol supports equal cost path load balancing. • In addition to that, IGRP and EIGRP also support unequal cost path load balancing. • Use the variance command to instruct the router to include routes with a metric less than n times the minimum metric route for that destination, where n is the number specified by the variance command. • Example: E-C-A: 20 * 2 = 40. Therefore, E-C-A and E-B-A will be used for load balancing. router eigrp 1 network x.x.x.x variance 2 http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009437d.shtml

  33. Administrative Distance of a Route • In fact, a router might learn of a route to the same network from more than one source. • For example, a static route might have been configured for the same network/subnet mask that was learned dynamically by a dynamic routing protocol, such as RIP. The router must choose which route to install. • Purpose of a metric • It’s a calculated value used to determine the best path to a destination • Purpose of Administrative Distance • It’s a numeric value that specifies the preference of a particular route source. For equal cost routes to be installed they both must be static routes or they both must be RIP routes.

  34. Administrative Distance of a Route • Administrative distance is an integer value from 0 to 255. • The lower the value the more preferred the route source. • An administrative distance of 0 is the most preferred. • Only a directly connected network has an administrative distance of 0, which cannot be changed • An administrative distance of 255 means the router will not believe the source of that route and it will not be installed in the routing table.

  35. Administrative Distance of a Route • Identifying the Administrative Distance (AD) in a routing table • It is the first number in the brackets in the routing table • R2 is running both RIP and EIGRP routing protocols. • R2 has learned of the 192.168.6.0/24 route from R1 through EIGRP updates and from R3 through RIP updates. • RIP has an administrative distance of 120, but EIGRP has a lower administrative distance of 90. • So, R2 adds the route learned using EIGRP to the routing table and forwards all packets for the 192.168.6.0/24 network to router R1. This show ip rip database command shows all RIP routes learned by R2, whether or not the RIP route is installed in the routing table.

  36. Administrative Distance of a Route • The AD value can also be verified with the show ip protocols command.

  37. Administrative Distance of a Route • Directly connected routes • -Immediately appear in the routing table as soon as the interface is configured

  38. Administrative Distance of a Route • Directly connected routes • Have a default AD of 0 • Static Routes • Administrative distance of a static route has a default value of 1 • A static route using either a next-hop IP address or an exit interface has a default AD value of 1. • However, the AD value is not listed in show ip route when you configure a static route with the exit interface specified. When a static route is configured with an exit interface, the output shows the network as directly connected via that interface.

  39. Administrative Distance of a Route

  40. Summary • Dynamic routing protocols fulfill the following functions • -Dynamically share information between routers • -Automatically update routing table when topology changes • -Determine best path to a destination • Routing protocols are grouped as either • -Interior gateway protocols (IGP)Or • -Exterior gateway protocols(EGP) • Types of IGPs include • -Classless routing protocols - these protocols include subnet mask in routing updates • -Classful routing protocols - these protocols do not include subnet mask in routing update

  41. Summary • Metrics are used by dynamic routing protocols to calculate the best path to a destination. • Administrative distance is an integer value that is used to indicate a router’s “trustworthiness” • Components of a routing table include: • -Route source • -Administrative distance (The smaller the better) • -Metric (The smaller the better)

More Related